Provide Cisco 200-301 Dumps Updated Sep 01, 2023 With 875 QA's
Latest 200-301 Dumps for Success in Actual Cisco Certified
Cisco 200-301 exam is a comprehensive exam that tests the candidate's knowledge and skills in a wide range of networking topics. It is a highly valued certification that is recognized by employers worldwide. The CCNA certification is suitable for those who are new to the networking industry or for those who wish to upgrade their skills to the latest networking technologies.
Cisco 200-301 certification is essential for network engineers, administrators, and technicians who want to enhance their career prospects in the networking industry. Cisco Certified Network Associate Exam certification is also beneficial for individuals who want to demonstrate their expertise in networking technologies and concepts to potential employers. 200-301 exam is designed to test an individual’s proficiency in designing, configuring, and troubleshooting network systems.
NEW QUESTION # 208
Router R1 must send all traffic without a matching routing-table entry to 192.168.1.1. Which configuration accomplishes this task?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: D
NEW QUESTION # 209
A network engineer is configuring an OSPFv2 neighbor adjacency Drag and drop the parameters from the left onto their required categories on the right. Not all parameters are used
Answer:
Explanation:
NEW QUESTION # 210
Refer to the exhibit. Which command configures OSPF on the point-to-point link between routers R1 and R2?
- A. network 10.0.0.0 0.0.0.255 area 0
- B. router-id 10.0.0.15
- C. neighbor 10.1.2.0 cost 180
- D. ipospf priority 100
Answer: A
NEW QUESTION # 211
Which of the following statements describe the network shown in the graphic? (Choose two.)
- A. There are four broadcast domains in the network.
- B. There are four collision domains in the network.
- C. There are seven collision domains in the network.
- D. There are five collision domains in the network.
- E. There are six broadcast domains in the network.
- F. There are two broadcast domains in the network.
Answer: C,F
NEW QUESTION # 212
Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right
Answer:
Explanation:
NEW QUESTION # 213
Drag and drop the threat-mitigation techniques from the left onto the types of threat or attack they mitigate on the right.
Answer:
Explanation:
NEW QUESTION # 214
Refer to the exhibit. When router R1 receives a packet with destination IP address 10.56.0.62 through which interface does it route the packet?
- A. VIan59
- B. VIan58
- C. Null0
- D. Vlan60
Answer: B
NEW QUESTION # 215
Which result occurs when PortFast is enabled on an interface that is connected to another switch?
- A. VTP is allowed to propagate VLAN configuration information from switch to switch automatically.
- B. After spanning tree converges, PortFast shuts down any port that receives BPDUs.
- C. Root port choice and spanning tree recalculation are accelerated when a switch link goes down.
- D. Spanning tree may fail to detect a switching loop in the network that causes broadcast storms.
Answer: D
Explanation:
Section: Network Access
Explanation:
Enabling the PortFast feature causes a switch or a trunk port to enter the STP forwarding-state immediately or upon a linkup event, thus bypassing the listening and learning states.
Note: To enable portfast on a trunk port you need the trunk keyword "spanning-tree portfast trunk"
NEW QUESTION # 216
Which technology is used to improve web traffic performance by proxy caching?
- A. FireSIGHT
- B. Firepower
- C. WSA
- D. ASA
Answer: C
Explanation:
Section: Network Access
NEW QUESTION # 217
Router R6 does not form an EIGRP neighbor relationship correctly with router R1.
What is the cause for this misconfiguration?
- A. The AS does not match.
- B. The network command is missing.
- C. The K values mismatch.
- D. The passive-interface command is enabled.
Answer: C
NEW QUESTION # 218
A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic.
What is the effect of adding switch ports to a new VLAN on the switch?
- A. More collision domains will be created.
- B. An additional broadcast domain will be created.
- C. More bandwidth will be required than was needed previously
- D. IP address utilization will be more efficient.
Answer: B
NEW QUESTION # 219
Refer to the exhibit.
What is the effect of the configuration?
- A. Traffic from PC A is dropped when it uses the trunk to communicate with PC B
- B. Traffic from PC A is sent untagged when it uses the trunk to communicate with PC B
- C. Traffic from PC B is sent untagged when it uses the trunk to communicate with PCA
- D. Traffic from PC B is dropped when it uses the trunk to communicate with PC A
Answer: D
NEW QUESTION # 220
Drag and drop the DHCP snooping terms from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 221
Which output displays a JSON data representation?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
Explanation:
JSON data is written as name/value pairs.
A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value:
"name":"Mark"
JSON can use arrays. Array values must be of type string, number, object, array, boolean or null. For example:
{
"name":"John",
"age":30,
"cars":[ "Ford", "BMW", "Fiat" ]
}
JSON can have empty object like "taskId":{}
NEW QUESTION # 222
Drag and drop the AAA functions from the left onto the correct AAA services on the right
Answer:
Explanation:
NEW QUESTION # 223
Refer to the exhibit.
An engineer configured the New York router with state routes that point to the Atlanta and Washington sites. When command must be configured on the Atlanta and Washington routers so that both sites are able to reach the loopback2 interface on the New York router?
- A. ip route 0.0.0.0.0.0.0.0 Serial 0/0/0
- B. ipv6 route ::/0 Serial 0/0/1
- C. ipv6 route ::/0 Serial 0/0/0
- D. ipv6 route 0/0 Serial 0/0/0
- E. ipv6 route ::/0 2000::2
Answer: C
NEW QUESTION # 224
Which type of address is the public IP address of a NAT device?
- A. inside public
- B. insride local
- C. outsdwde local
- D. outside global
- E. outside public
- F. inside global
Answer: F
Explanation:
NAT use four types of addresses:
* Inside local address - The IP address assigned to a host on the inside network. The address is usually not an IP address assigned by the Internet Network Information Center (InterNIC) or service provider.
This address is likely to be an RFC 1918 private address.
* Inside global address - A legitimate IP address assigned by the InterNIC or service provider that represents one or more inside local IP addresses to the outside world.
* Outside local address - The IP address of an outside host as it is known to the hosts on the inside network.
* Outside global address - The IP address assigned to a host on the outside network. The owner of the host assigns this address.
NEW QUESTION # 225 
Refer to the exhibit. Which action do the switches take on the trunk link?
- A. The trunk forms, but VLAN 99 and VLAN 999 are in a shutdown state.
- B. The trunk does not form, but VLAN 99 and VLAN 999 are allowed to traverse the link.
- C. The trunk does not form, and the ports go into an err-disabled status.
- D. The trunk forms, but the mismatched native VLANs are merged into a single broadcast domain.
Answer: D
Explanation:
Section: Network Access
NEW QUESTION # 226
An engineer is configuring NAT to translate the source subnet of 10.10.0.0/24 to any one of three addresses: 192.168.3.1, 192.168.3.2, or 192.168.3.3. Which configuration should be used?
Which configuration should be used?
- A. enable
configure terminal
ip nat pool mypool 192.168.3.1 192.168.3.3 prefix-length 30
access-list 1 permit 10.10.0.0 0.0.0.254
ip nat inside source list 1 pool mypool
interface g1/1
ip nat inside
interface g1/2
ip nat outside - B. enable
configure terminal
ip nat pool mypool 192.168.3.1 192.168.3.3 prefix-length 30
access-list 1 permit 10.10.0.0 0.0.0.255
ip nat inside source list 1 pool mypool
interface g1/1
ip nat inside
interface g1/2
ip nat outside - C. enable
configure terminal
ip nat pool mypool 192.168.3.1 192.168.3.3 prefix-length 30
access-list 1 permit 10.10.0.0 0.0.0.255
ip nat outside destination list 1 pool mypool
interface g1/1
ip nat inside
interface g1/2
ip nat outside - D. enable
configure terminal
ip nat pool mypool 192.168.3.1 192.168.3.3 prefix-length 30
route-map permit 10.10.0.0 255.255.255.0
ip nat outside destination list 1 pool mypool
interface g1/1
ip nat inside
interface g1/2
ip nat outside
Answer: B
NEW QUESTION # 227
Refer to the exhibit.
PC1 is trying to ping PC3 for the first time and sends out an ARP to S1 Which action is taken by S1?
- A. It forwards it out G0/3 only
- B. It drops the frame.
- C. It is flooded out every port except G0/0.
- D. It forwards it out interface G0/2 only.
Answer: C
NEW QUESTION # 228
Which two address spaces are valid Class B IPV4 ranges that are non-routable to the internet? (choose two)
- A. 172.16.0.0 through 172.31.255.255
- B. 172.16.0.0 through 172.32.255.255
- C. 10.0.0.0 through 10.0.255.255
- D. 192.168.0.0 through 192.168.255.255
- E. 169.254.0.0 through 169.254.255.255
Answer: A,E
NEW QUESTION # 229
Which technique can you use to route IPv6 traffic over an IPv4 infrastructure?
- A. 6 to 4 tunneling
- B. L2TPv3
- C. dual-stack
- D. NAT
Answer: A
Explanation:
Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure (a core network or the figure below). By using overlay tunnels, you can communicate with isolated IPv6 networks without upgrading the IPv4 infrastructure between them. Overlay tunnels can be configured between border devices or between a border device and a host; however, both tunnel endpoints must support both the IPv4 and IPv6 protocol stacks. IPv6 supports the following types of overlay tunneling mechanisms:
1 Manual
2 Generic routing encapsulation (GRE)
3 IPv4-compatible
4 6to4
5 Intrasite Automatic Tunnel Addressing Protocol (ISATAP)
NEW QUESTION # 230
......
Changing the Concept of 200-301 Exam Preparation 2023: https://www.prep4sureguide.com/200-301-prep4sure-exam-guide.html
Getting 200-301 Certification Made Easy: https://drive.google.com/open?id=1YK-RafrjMMrhcBFRD3Dzawh_zPYO95ys