[May 03, 2025] C-ABAPD-2309 PDF Questions and Testing Engine With 85 Questions
Updated Exam Engine for C-ABAPD-2309 Exam Free Demo & 365 Day Updates
SAP C-ABAPD-2309 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 19
In this nested join below in which way is the join evaluated?
- A. From the right to the left in the order of the tables:
1.
b is joined with c.
2.
b is joined with a. - B. From the top to the bottom in the order of the on conditions
1.
b is joined with c
2.
a is joined with b - C. From the left to the right in the order of the tables:
1.
a is joined with b
2.
b is joined with c - D. From the bottom to the top in the order of the on conditions:
1.
a is joined with b
2.
b is joined with c
Answer: B
Explanation:
Explanation
The nested join is evaluated from the top to the bottom in the order of the ON conditions. This means that the join expression is formed by assigning each ON condition to the directly preceding JOIN from left to right.
The join expression can be parenthesized implicitly or explicitly to show the order of evaluation. In this case, the implicit parentheses are as follows:
SELECT * FROM (a INNER JOIN (b INNER JOIN c ON b~c = c~c) ON a~b = b~b) This means that the first join expression is b INNER JOIN c ON b~c = c~c, which joins the columns of tables b and c based on the condition that b~c equals c~c. The second join expression is a INNER JOIN (b INNER JOIN c ON b~c = c~c) ON a~b = b~b, which joins the columns of table a and the result of the first join expression based on the condition that a~b equals b~b. The final result set contains all combinations of rows from tables a, b, and c that satisfy both join conditions.
References: 1: SELECT, FROM JOIN - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 20
When processing an internal table with the statement LOOP AT itab... ENDLOOP, what system variable contains the current row number?
- A. sy-linno
- B. sy-subrc
- C. sy-tabix
- D. sy-index
Answer: C
Explanation:
Explanation
When processing an internal table with the statement LOOP AT itab... ENDLOOP, the system variable that contains the current row number is sy-tabix. The sy-tabix variable is a predefined field of the system structure sy that holds the index or the row number of the current line in an internal table loop. The sy-tabix variable is initialized with the value 1 for the first loop pass and is incremented by 1 for each subsequent loop pass. The sy-tabix variable can be used to access or modify the current line of the internal table using the index access12.
References: 1: LOOP AT itab - ABAP Keyword Documentation - SAP Online Help 2: System Fields - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 21
In a subclass subl you want to redefine a component of a superclass superl. How do you achieve this? Note: There are 2 correct answers to this question.
- A. You implement the redefined component for a second time in superl.
- B. You implement the redefined component in subl.
- C. You add the clause REDEFINITION to the component in subl.
- D. You add the clause REDEFINITION to the component in superl.
Answer: B,C
Explanation:
To redefine a component of a superclass in a subclass, you need to do the following12:
You add the clause REDEFINITION to the component declaration in the subclass. This indicates that the component is inherited from the superclass and needs to be reimplemented in the subclass. The redefinition must happen in the same visibility section as the component declaration in the superclass. For example, if the superclass has a public method m1, the subclass must also declare the redefined method m1 as public with the REDEFINITION clause.
You implement the redefined component in the subclass. This means that you provide the new logic or behavior for the component that is specific to the subclass. The redefined component in the subclass will override the original component in the superclass when the subclass object is used. For example, if the superclass has a method m1 that returns 'Hello', the subclass can redefine the method m1 to return 'Hi' instead.
You cannot do any of the following:
You implement the redefined component for a second time in the superclass. This is not possible, because the superclass already has an implementation for the component that is inherited by the subclass. The subclass is responsible for providing the new implementation for the redefined component, not the superclass.
You add the clause REDEFINITION to the component in the superclass. This is not necessary, because the superclass does not need to indicate that the component can be redefined by the subclass. The subclass is the one that needs to indicate that the component is redefined by adding the REDEFINITION clause to the component declaration in the subclass.
NEW QUESTION # 22
In ABAP SQL, which of the following can be assigned an alias? Note: There are 2 correct answers to this question.
- A. field (from field list)
- B. database table
- C. group criterion (from group by clause)
- D. order criterion (from order by clause)
Answer: A,B
Explanation:
In ABAP SQL, an alias is a temporary name that can be assigned to a field or a database table in a query. An alias can be used to make the query more readable, to avoid name conflicts, or to access fields or tables with long names. An alias is created with the AS keyword and is only valid for the duration of the query1.
The following are examples of how to assign an alias to a field or a database table in ABAP SQL:
B) field (from field list): A field is a column of a table or a view that contains data of a certain type. A field can be assigned an alias in the field list of a SELECT statement, which specifies the fields that are selected from the data source. For example, the following query assigns the alias name to the field carrname of the table scarr:
SELECT carrid, carrname AS name FROM scarr.
The alias name can be used instead of carrname in other clauses of the query, such as WHERE, GROUP BY, ORDER BY, and so on2.
C) database table: A database table is a collection of data that is organized in rows and columns. A database table can be assigned an alias in the FROM clause of a SELECT statement, which specifies the data source that is selected from. For example, the following query assigns the alias c to the table scarr:
SELECT c.carrid, c.carrname FROM scarr AS c.
The alias c can be used instead of scarr in other clauses of the query, such as WHERE, JOIN, GROUP BY, ORDER BY, and so on3.
The following are not valid for assigning an alias in ABAP SQL:
A) order criterion (from order by clause): An order criterion is a field or an expression that is used to sort the result set of a query in ascending or descending order. An order criterion cannot be assigned an alias in the ORDER BY clause of a SELECT statement, because the alias is not visible in this clause. The alias can only be used in the clauses that follow the clause where it is defined1.
D) group criterion (from group by clause): A group criterion is a field or an expression that is used to group the result set of a query into subsets that share the same values. A group criterion cannot be assigned an alias in the GROUP BY clause of a SELECT statement, because the alias is not visible in this clause. The alias can only be used in the clauses that follow the clause where it is defined1.
NEW QUESTION # 23
What are some characteristics of secondary keys for internal tables? Note: There are 3 correct answers to this question.
- A. Multiple secondary keys are allowed for any kind of internal table.
- B. Secondary keys can only be created for standard tables.
- C. Hashed secondary keys do NOT have to be unique.
- D. Secondary keys must be chosen explicitly when you actually read from an internal table.
- E. Sorted secondary keys do NOT have to be unique.
Answer: A,D,E
Explanation:
Secondary keys are additional keys that can be defined for internal tables to optimize the access to the table using fields that are not part of the primary key. Secondary keys can be either sorted or hashed, depending on the table type and the uniqueness of the key. Secondary keys have the following characteristics1:
* A. Secondary keys must be chosen explicitly when you actually read from an internal table. This means that when you use a READ TABLE or a LOOP AT statement to access an internal table, you have to specify the secondary key that you want to use with the USING KEY addition. For example, the following statement reads an internal table itab using a secondary key sec_key:
READ TABLE itab USING KEY sec_key INTO DATA(wa).
If you do not specify the secondary key, the system will use the primary key by default2.
* B. Multiple secondary keys are allowed for any kind of internal table. This means that you can define more than one secondary key for an internal table, regardless of the table type. For example, the following statement defines an internal table itab with two secondary keys sec_key_1 and sec_key_2:
DATA itab TYPE SORTED TABLE OF ty_itab WITH NON-UNIQUE KEY sec_key_1 COMPONENTS field1 field2 sec_key_2 COMPONENTS field3 field4.
You can then choose which secondary key to use when you access the internal table1.
* D. Sorted secondary keys do NOT have to be unique. This means that you can define a sorted secondary key for an internal table that allows duplicate values for the key fields. A sorted secondary key maintains a predefined sorting order for the internal table, which is defined by the key fields in the order in which they are specified. For example, the following statement defines a sorted secondary key sec_key for an internal table itab that sorts the table by field1 in ascending order and field2 in descending order:
DATA itab TYPE STANDARD TABLE OF ty_itab WITH NON-UNIQUE SORTED KEY sec_key COMPONENTS field1 ASCENDING field2 DESCENDING.
You can then access the internal table using the sorted secondary key with a binary search algorithm, which is faster than a linear search3.
The following are not characteristics of secondary keys for internal tables, because:
* C. Hashed secondary keys do NOT have to be unique. This is false because hashed secondary keys must be unique. This means that you can only define a hashed secondary key for an internal table that does not allow duplicate values for the key fields. A hashed secondary key does not have a predefined sorting order for the internal table, but uses a hash algorithm to store and access the table rows. For example, the following statement defines a hashed secondary key sec_key for an internal table itab that hashes the table by field1 and field2:
DATA itab TYPE STANDARD TABLE OF ty_itab WITH UNIQUE HASHED KEY sec_key COMPONENTS field1 field2.
You can then access the internal table using the hashed secondary key with a direct access algorithm, which is very fast.
* E. Secondary keys can only be created for standard tables. This is false because secondary keys can be created for any kind of internal table, such as standard tables, sorted tables, and hashed tables.
However, the type of the secondary key depends on the type of the internal table. For example, a standard table can have sorted or hashed secondary keys, a sorted table can have sorted secondary keys, and a hashed table can have hashed secondary keys1.
References: 1: Secondary Table Key - ABAP Keyword Documentation 2: READ TABLE - ABAP Keyword Documentation 3: Sorted Tables - ABAP Keyword Documentation : Hashed Tables - ABAP Keyword Documentation
NEW QUESTION # 24
What are advantages of using a field symbol for internal table row access? Note: There are answers to this question.
- A. The row content is copied to the field symbol instead to a work area
- B. A MODIFY statement to write changed contents back to the table is not required.
- C. The field symbol can be reused for other programs.
- D. Using a field symbol is faster than using a work area.
Answer: B,D
Explanation:
Explanation
A field symbol is a pointer that allows direct access to a row of an internal table without copying it to a work area. Using a field symbol for internal table row access has some advantages over using a work area, such as12:
A MODIFY statement to write changed contents back to the table is not required: This is true. When you use a work area, you have to copy the row content from the internal table to the work area, modify it, and then copy it back to the internal table using the MODIFY statement. This can be costly in terms of performance and memory consumption. When you use a field symbol, you can modify the row content directly in the internal table without any copying. Therefore, you do not need the MODIFY statement12.
Using a field symbol is faster than using a work area: This is true. As explained above, using a field symbol avoids the overhead of copying data between the internal table and the work area. This can improve the performance of the loop considerably, especially for large internal tables. According to some benchmarks, using a field symbol can save 25-40% of the runtime compared to using a work area12.
You cannot do any of the following:
The field symbol can be reused for other programs: This is false. A field symbol is a local variable that is only visible within the scope of its declaration. It cannot be reused for other programs unless it is declared globally or passed as a parameter. Moreover, a field symbol must have the same type as the line type of the internal table that it accesses. Therefore, it cannot be used for any internal table with a different line type12.
The row content is copied to the field symbol instead to a work area: This is false. As explained above, using a field symbol does not copy the row content to the field symbol. Instead, the field symbol points to the memory address of the row in the internal table and allows direct access to it. Therefore, there is no copying involved when using a field symbol12.
References: 1: Using Field Symbols to Process Internal Tables - SAP Learning 2: Access to Internal Tables - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 25
Exhibit:
Which of the following statements are correct? Note: There are 2 correct answers to this question.
- A. row is a predefined name and cannot be chosen arbitrarily.
- B. row is only visible within the loop.
- C. FOR defines a loop that runs over the content of source_itab
- D. source_itab is only visible within the loop.
Answer: B,C
Explanation:
The code snippet in the image is an example of using the FOR statement to create an internal table with a constructor expression. The FOR statement introduces an iteration expression that runs over the content of source_itab and assigns each row to the variable row. The variable row is then used to populate the fields of target_itab12. Some of the correct statements about the code snippet are:
* FOR defines a loop that runs over the content of source_itab: This is true. The FOR statement iterates over the rows of source_itab and assigns each row to the variable row. The iteration expression can also specify a range or a condition for the loop12.
* row is only visible within the loop: This is true. The variable row is a local variable that is only visible within the scope of the iteration expression. It cannot be accessed outside the loop12.
You cannot do any of the following:
* source_itab is only visible within the loop: This is false. The variable source_itab is not a local variable that is defined by the FOR statement. It is an existing internal table that is used as the data source for the iteration expression. It can be accessed outside the loop12.
* row is a predefined name and cannot be chosen arbitrarily: This is false. The variable row is not a
* predefined name that is reserved by the FOR statement. It is a user-defined name that can be chosen arbitrarily. However, it must not conflict with any existing names in the program12.
References: 1: FOR - Iteration Expressions - ABAP Keyword Documentation - SAP Online Help 2: ABAP 7.4 Syntax - FOR Loop iteration | SAP Community
NEW QUESTION # 26
In which products must you use the ABAP Cloud Development Model? Note: There are 2 correct answers to this question.
- A. SAP S/4HANA Cloud, private edition
- B. SAP BTP, ABAP environment
- C. SAP S/4HANA on premise
- D. SAP S/4HANA Cloud, public edition
Answer: A,B
Explanation:
The ABAP Cloud Development Model is the ABAP development model to build cloud-ready business apps, services, and extensions. It comes with SAP BTP and SAP S/4HANA. It works with public or private cloud, and even on-premise1. However, the complete ABAP Cloud Development Model, including the cloud-optimized ABAP language and public local SAP APIs and extension points, is available only in SAP BTP ABAP Environment and in the 2208/2022 versions of the SAP S/4HANA editions1. Therefore, you must use the ABAP Cloud Development Model in SAP BTP, ABAP environment and SAP S/4HANA Cloud, private edition. You can also use it in SAP S/4HANA on premise, but it is not mandatory. You cannot use it in SAP S/4HANA Cloud, public edition, because it does not allow custom ABAP code2. References: 1: ABAP Cloud | SAP Blogs 2: SAP S/4HANA Cloud Extensibility - Overview and Comparison | SAP Blogs
NEW QUESTION # 27
What are advantages of using a field symbol for internal table row access? Note: There are answers to this question.
- A. The row content is copied to the field symbol instead to a work area
- B. A MODIFY statement to write changed contents back to the table is not required.
- C. The field symbol can be reused for other programs.
- D. Using a field symbol is faster than using a work area.
Answer: B,D
Explanation:
A field symbol is a pointer that allows direct access to a row of an internal table without copying it to a work area. Using a field symbol for internal table row access has some advantages over using a work area, such as12:
* A MODIFY statement to write changed contents back to the table is not required: This is true. When you use a work area, you have to copy the row content from the internal table to the work area, modify it, and then copy it back to the internal table using the MODIFY statement. This can be costly in terms of performance and memory consumption. When you use a field symbol, you can modify the row content directly in the internal table without any copying. Therefore, you do not need the MODIFY statement12.
* Using a field symbol is faster than using a work area: This is true. As explained above, using a field symbol avoids the overhead of copying data between the internal table and the work area. This can improve the performance of the loop considerably, especially for large internal tables. According to some benchmarks, using a field symbol can save 25-40% of the runtime compared to using a work area12.
You cannot do any of the following:
* The field symbol can be reused for other programs: This is false. A field symbol is a local variable that is only visible within the scope of its declaration. It cannot be reused for other programs unless it is declared globally or passed as a parameter. Moreover, a field symbol must have the same type as the line type of the internal table that it accesses. Therefore, it cannot be used for any internal table with a different line type12.
* The row content is copied to the field symbol instead to a work area: This is false. As explained above, using a field symbol does not copy the row content to the field symbol. Instead, the field symbol points to the memory address of the row in the internal table and allows direct access to it. Therefore, there is no copying involved when using a field symbol12.
References: 1: Using Field Symbols to Process Internal Tables - SAP Learning 2: Access to Internal Tables - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 28
You have two internal tables itab1 and itab2.What is true for using the expression itab1 = corresponding #( itab2 )? Note: There are 2 correct answers to this question.
- A. itab1 and itab2 must have the same data type.
- B. Fields with the same name and the same type will be copied from itab2 to itab1.
- C. Fields with the same name but with different types may be copied from itab2 to itab1.
- D. itab1 and itab2 must have at least one field name in common.
Answer: B,D
Explanation:
Explanation
The expression itab1 = corresponding #( itab2 ) is a constructor expression with the component operator CORRESPONDING that assigns the contents of the internal table itab2 to the internal table itab1. The following statements are true for using this expression:
B: itab1 and itab2 must have at least one field name in common. This is because the component operator CORRESPONDING assigns the identically named columns of itab2 to the identically named columns of itab1 by default, according to the rules of MOVE-CORRESPONDING for internal tables. If itab1 and itab2 do not have any field name in common, the expression will not assign any value to itab1 and it will remain initial or unchanged1 C: Fields with the same name and the same type will be copied from itab2 to itab1. This is because the component operator CORRESPONDING assigns the identically named columns of itab2 to the identically named columns of itab1 by default, according to the rules of MOVE-CORRESPONDING for internal tables. If the columns have the same name but different types, the assignment will try to perform a conversion between the types, which may result in a loss of precision, a truncation, or a runtime error, depending on the types involved1 The following statements are false for using this expression:
A: Fields with the same name but with different types may be copied from itab2 to itab1. This is not true, as explained in statement C.
The assignment will try to perform a conversion between the types, which may result in a loss of precision, a truncation, or a runtime error, depending on the types involved1 D: itab1 and itab2 must have the same data type. This is not true, as the component operator CORRESPONDING can assign the contents of an internal table of one type to another internal table of a different type, as long as they have at least one field name in common. The target type of the expression is determined by the left-hand side of the assignment, which is itab1 in this case. The expression will create an internal table of the same type as itab1 and assign it to itab11 References: CORRESPONDING - Component Operator - ABAP Keyword Documentation
NEW QUESTION # 29
Which of the following actions cause an indirect change to a database table requiring a table conversion? Note:
There are 2 correct answers to this question.
- A. Deleting a field from a structure that is included in the table definition.
- B. Changing the field labels of a data element that is used in the table definition.
- C. Shortening the length of a domain used in a data element that is used in the table definition.
- D. Renaming a field in a structure that is included in the table definition
Answer: A,D
Explanation:
Explanation
The following are the explanations for each action:
A: Renaming a field in a structure that is included in the table definition causes an indirect change to the database table, as the field name in the table is derived from the structure. This change requires a table conversion, as the existing data in the table must be copied to a new table with the new field name, and the old table must be deleted.
B: Changing the field labels of a data element that is used in the table definition does not cause an indirect change to the database table, as the field labels are only used for documentation and display purposes. This change does not require a table conversion, as the existing data in the table is not affected by the change.
C: Deleting a field from a structure that is included in the table definition causes an indirect change to the database table, as the field is removed from the table as well. This change requires a table conversion, as the existing data in the table must be copied to a new table without the deleted field, and the old table must be deleted.
D: Shortening the length of a domain used in a data element that is used in the table definition causes an indirect change to the database table, as the field length in the table is derived from the domain. This change requires a table conversion, as the existing data in the table must be checked for compatibility with the new field length, and any data that exceeds the new length must be truncated or rejected.
References: Converting Database Tables - ABAP Keyword Documentation, Adjustment of Database Structures - ABAP Keyword Documentation
NEW QUESTION # 30
For the assignment, gv_target = gv_source.
which of the following data declarations will always work without truncation or rounding? Note: There are 2 correct answers to this question.
- A. DATA gv_source TYPE d. to DATA gv_target TYPE string.
- B. DATA gv_source TYPE string, to DATA gv_target TYPE c.
- C. DATA gv_source TYPE c. to DATA gv_target TYPE string.
- D. DATA gv_source TYPE p LENGTH 8 DECIMALS 3. to DATA gv_target TYPE p LENGTH 16 DECIMALS 2.
Answer: A,C
Explanation:
Explanation
The data declarations that will always work without truncation or rounding for the assignment gv_target = gv_source are B and C. This is because the target data type string is a variable-length character type that can hold any character string, including those of data types c (fixed-length character) and d (date). The assignment of a character or date value to a string variable will not cause any loss of information or precision, as the string variable will adjust its length to match the source value12.
You cannot do any of the following:
A: DATA gv_source TYPE string, to DATA gv_target TYPE c.: This data declaration may cause truncation for the assignment gv_target = gv_source. This is because the target data type c is a fixed-length character type that has a predefined length. If the source value of type string is longer than the target length of type c, the source value will be truncated on the right to fit the target length12.
D: DATA gv_source TYPE p LENGTH 8 DECIMALS 3. to DATA gv_target TYPE p LENGTH 16 DECIMALS 2.: This data declaration may cause rounding for the assignment gv_target = gv_source.
This is because the target data type p is a packed decimal type that has a predefined length and number of decimal places. If the source value of type p has more decimal places than the target type p, the source value will be rounded to the target number of decimal places12.
References: 1: ABAP Data Types - ABAP Keyword Documentation - SAP Online Help 2: ABAP Assignment Rules - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 31
Which function call returns 0?
- A. Count (val - 'ABAP ABAP abap' sub - 'AB' )
- B. find_any_not_of( val 'ABAP ABAP abap' sub = 'AB')
- C. Count_any_of ( val - 'ABAP ABAP abap' sub "AB" )
- D. find_any_of (val = "ABAP ABAP abap' sub = "AB")
Answer: B
Explanation:
The function find_any_not_of returns the position of the first character in the string val that is not contained in the string sub. If no such character is found, the function returns 0. In this case, the string val contains only the characters A, B, and a, which are all contained in the string sub, so the function returns 0. The other functions return positive values, as follows:
* Count_any_of returns the number of occurrences of any character in the string sub within the string val.
In this case, it returns 8, since there are 8 A's and B's in val.
* Count returns the number of occurrences of the string sub within the string val. In this case, it returns 2, since there are 2 AB's in val.
* find_any_of returns the position of the first character in the string val that is contained in the string sub.
In this case, it returns 1, since the first character A is in sub. References: String Functions - ABAP Keyword Documentation, Examples of String Functions - ABAP Keyword Documentation
NEW QUESTION # 32
For what kind of applications would you consider using on-stack developer extensions? Note: There are 2 correct answers to this question.
- A. Applications that provide APIs for side by side SAP BTP apps
- B. Applications that run separate from SAP S/4HANA
- C. Applications that access SAP S/4HANA data using complex SQL
- D. Applications that integrate data from several different systems
Answer: A,C
Explanation:
On-stack developer extensibility is a type of extensibility that allows you to create development projects directly on the SAP S/4HANA Cloud technology stack. It gives you the opportunity to develop cloud-ready and upgrade-stable custom ABAP applications and services inside the SAP S/4HANA Cloud, public edition system. You can use the ABAP Development Tools in Eclipse to create and deploy your on-stack extensions.
On-stack developer extensibility is suitable for the following kinds of applications:
* Applications that provide APIs for side by side SAP BTP apps. On-stack developer extensibility allows you to create OData services or RESTful APIs based on CDS view entities or projection views. These services or APIs can expose SAP S/4HANA data and logic to other applications that run on the SAP Business Technology Platform (SAP BTP) or other platforms. This way, you can create a loosely coupled integration between your SAP S/4HANA system and your side by side SAP BTP apps.
* Applications that access SAP S/4HANA data using complex SQL. On-stack developer extensibility allows you to use ABAP SQL to access SAP S/4HANA data using complex queries, such as joins, aggregations, filters, parameters, and code pushdown techniques. You can also use ABAP SQL to perform data manipulation operations, such as insert, update, delete, and upsert. This way, you can create applications that require advanced data processing and analysis on SAP S/4HANA data.
The other kinds of applications are not suitable for on-stack developer extensibility, as they have different requirements and challenges. These kinds of applications are:
* Applications that integrate data from several different systems. On-stack developer extensibility is not meant for creating applications that integrate data from multiple sources, such as other SAP systems, third-party systems, or cloud services. This is because on-stack developer extensibility does not support remote access or data replication, and it may cause performance or security issues. For this kind of
* applications, you should use side by side extensibility, which allows you to create applications that run on the SAP BTP and communicate with the SAP S/4HANA system via public APIs or events.
* Applications that run separate from SAP S/4HANA. On-stack developer extensibility is not meant for creating applications that run independently from the SAP S/4HANA system, such as standalone apps, microservices, or web apps. This is because on-stack developer extensibility requires a tight coupling with the SAP S/4HANA system, and it may limit the scalability, flexibility, and portability of the applications. For this kind of applications, you should use side by side extensibility, which allows you to create applications that run on the SAP BTP and leverage the cloud-native features and services of the platform.
References: Developer Extensibility in SAP S/4HANA Cloud ABAP Environment, SAP S/4HANA Extensibility - Simplified Guide for Beginners
NEW QUESTION # 33
Why would you use Access Controls with CDS Views? Note: There are 2 correct answers to this question.
- A. The system field sy-subrc is set, giving you the result of the authorization check
- B. Only the data corresponding to the user's authorization is transferred from the database to the application layer.
- C. You do not have to remember to implement AUTHORITY CHECK statements.
- D. All of the data from the data sources is loaded into your application automatically and filtered there according to the user's authorization.
Answer: B,C
Explanation:
You would use Access Controls with CDS Views for the following reasons:
A) Only the data corresponding to the user's authorization is transferred from the database to the application layer. This is true because Access Controls allow you to define CDS roles that specify the authorization conditions for accessing a CDS view. The CDS roles are evaluated for every user at runtime and the system automatically adds the restrictions to the selection conditions of the CDS view. This ensures that only the data that the user is authorized to see is read from the database and transferred to the application layer. This improves the security and the performance of the data access1.
C) You do not have to remember to implement AUTHORITY CHECK statements. This is true because Access Controls provide a declarative and centralized way of defining the authorization logic for a CDS view. You do not have to write any procedural code or use the AUTHORITY CHECK statement to check the user's authorization for each data source or field. The system handles the authorization check automatically and transparently for you2.
The following reasons are not valid for using Access Controls with CDS Views:
B) The system field sy-subrc is set, giving you the result of the authorization check. This is false because the system field sy-subrc is not used by Access Controls. The sy-subrc field is used by the AUTHORITY CHECK statement to indicate the result of the authorization check, but Access Controls do not use this statement. Instead, Access Controls use CDS roles to filter the data according to the user's authorization2.
D) All of the data from the data sources is loaded into your application automatically and filtered there according to the user's authorization. This is false because Access Controls do not load all the data from the data sources into the application layer. Access Controls filter the data at the database layer, where the data resides, and only transfer the data that the user is authorized to see to the application layer. This reduces the data transfer and the memory consumption of the application layer1.
NEW QUESTION # 34
You have two internal tables itab1 and itab2.What is true for using the expression itab1 = corresponding #( itab2 )? Note: There are 2 correct answers to this question.
- A. itab1 and itab2 must have the same data type.
- B. Fields with the same name and the same type will be copied from itab2 to itab1.
- C. Fields with the same name but with different types may be copied from itab2 to itab1.
- D. itab1 and itab2 must have at least one field name in common.
Answer: B,D
Explanation:
The expression itab1 = corresponding #( itab2 ) is a constructor expression with the component operator CORRESPONDING that assigns the contents of the internal table itab2 to the internal table itab1. The following statements are true for using this expression:
* B: itab1 and itab2 must have at least one field name in common. This is because the component operator CORRESPONDING assigns the identically named columns of itab2 to the identically named columns of itab1 by default, according to the rules of MOVE-CORRESPONDING for internal tables. If itab1 and itab2 do not have any field name in common, the expression will not assign any value to itab1 and it will remain initial or unchanged1
* C: Fields with the same name and the same type will be copied from itab2 to itab1. This is because the component operator CORRESPONDING assigns the identically named columns of itab2 to the identically named columns of itab1 by default, according to the rules of MOVE-CORRESPONDING for internal tables. If the columns have the same name but different types, the assignment will try to perform a conversion between the types, which may result in a loss of precision, a truncation, or a runtime error, depending on the types involved1 The following statements are false for using this expression:
* A: Fields with the same name but with different types may be copied from itab2 to itab1. This is not true, as explained in statement C. The assignment will try to perform a conversion between the types, which may result in a loss of precision, a truncation, or a runtime error, depending on the types involved1
* D: itab1 and itab2 must have the same data type. This is not true, as the component operator CORRESPONDING can assign the contents of an internal table of one type to another internal table of a different type, as long as they have at least one field name in common. The target type of the expression is determined by the left-hand side of the assignment, which is itab1 in this case. The expression will create an internal table of the same type as itab1 and assign it to itab11 References: CORRESPONDING - Component Operator - ABAP Keyword Documentation
NEW QUESTION # 35
Which extensibility type does SAP recommend you use to enhance the existing UI for an SAP Fiori app?
- A. Developer
- B. Side-by-side
- C. Key user
- D. Classic
Answer: A
Explanation:
According to the SAP clean core extensibility and ABAP cloud topic, SAP recommends using developer extensibility to enhance the existing UI for an SAP Fiori app. Developer extensibility allows you to use the UI adaptation editor in SAP Web IDE to modify the UI layout, add or remove fields, and bind them to the data model. You can also use the SAPUI5 framework to create custom controls, views, and controllers. Developer extensibility is based on the in-app extensibility concept, which means that the extensions are part of the same application and are deployed together with the app. Developer extensibility requires developer skills and access to the source code of the app. References: SAP Learning Hub, SAP S/4HANA Cloud Extensibility - In-App Extensibility, SAP Fiori: Extensibility
NEW QUESTION # 36
/DMO/I_Connection is a CDS view.
What variable type is connection full based on the following code? DATA connection full TYPE
/DMD/I_Connection.
- A. Structure
- B. Simple variable
- C. Internal Table
Answer: A
Explanation:
Explanation
Based on the following code, the variable type of connection_full is a structure. A structure is a complex data type that consists of a group of related data objects, called components, that have their own data types and names. A structure can be defined using the TYPES statement or based on an existing structure type, such as a CDS view entity or a CDS DDIC-based view. In this case, the variable connection_full is declared using the TYPE addition, which means that it has the same structure type as the CDS view entity /DMO/I_Connection.
The CDS view entity /DMO/I_Connection is a data model view that defines a data model based on the database table /DMO/Connection. The CDS view entity /DMO/I_Connection has the following components:
carrid, connid, airpfrom, airpto, distance, and fltime. Therefore, the variable connection_full has the same components as the CDS view entity /DMO/I_Connection, and each component has the same data type and length as the corresponding field in the database table /DMO/Connection.
References: CDS Data Model Views - ABAP Keyword Documentation, DATA - ABAP Keyword Documentation, Structure Types - ABAP Keyword Documentation
NEW QUESTION # 37
Which patterns raise an exception? Note: There are 3 correct answers to this question.
- A. DATA: gv_target TYPE string. □ CONSTANTS: gco_string TYPE LENGTH 16 VALUE 0123456789ABCDEF*. gv_target = EXACT # gco_string+5 (5) ).
- B. DATA: gv_target TYPE p DECIMALS 2. CONSTANTS: go intl TYPE i VALUE 3. gv_target -U EXACT (2 gcojntl).
- C. DATA: Ev target TYPE p DECIMALS 3. CONSTANTS: gcojntl TYPE i VALUE 2. Ev_target -U EXACT #2 / gcojntl ).
- D. DATA: gv_target TYPE c LENGTH 5. V □ CONSTANTS: ECO string TYPE string VALUE 0123456789ABCDEF". gv_target - EXACT (gco_string + 5 (6) ).
- E. DATA: gv_target TYPE d. s/ □ CONSTANTS: gco_date TYPE d VALUE '20331233*. gv_target EXACT ( geo_date).
Answer: B,D,E
Explanation:
The patterns that raise an exception are those that use the constructor operator EXACT to perform a lossless assignment or calculation, but the result cannot be converted to the target data type without data loss. The following are the explanations for each pattern:
A: This pattern raises the exception CX_SY_CONVERSION_LOST because the result of the calculation 2 * 3 is 6, which cannot be assigned to a packed number with two decimal places without losing the integer part. The operator -U is used to perform a lossless calculation with the calculation type decfloat34.
B: This pattern does not raise an exception because the result of the substring expression gco_string+5(5) is '6789A', which can be assigned to a string without data loss. The operator EXACT # is used to perform a lossless assignment with the data type of the argument.
C: This pattern raises the exception CX_SY_CONVERSION_LOST because the result of the substring expression gco_string+5(6) is '6789AB', which cannot be assigned to a character field with length 5 without losing the last character. The operator EXACT is used to perform a lossless assignment with the data type of the target field.
D: This pattern does not raise an exception because the result of the calculation 2 / 2 is 1, which can be assigned to a packed number with three decimal places without data loss. The operator -U is used to perform a lossless calculation with the calculation type decfloat34.
E: This pattern raises the exception CX_SY_CONVERSION_ERROR because the constant gco_date contains an invalid value '20331233' for a date data type, which cannot be converted to a valid date. The operator EXACT is used to perform a lossless assignment with the data type of the target field.
NEW QUESTION # 38
Setting a field to read-only in which object would make the field read-only in all applications of the RESTful Application Programming model?
- A. Service definition
- B. Projection view
- C. Metadata extension
- D. Behaviour definition
Answer: D
Explanation:
The object that can be used to set a field to read-only in all applications of the RESTful Application Programming model (RAP) is the behaviour definition. The behaviour definition is a CDS artefact that defines the business logic and the UI behaviour of a business object. A business object is a CDS entity that represents a business entity or concept, such as a customer, an order, or a product. The behaviour definition can specify the properties of the fields of a business object, such as whether they are mandatory, read-only, or transient. These properties are valid for all applications that use the business object, such as transactional, analytical, or draft-enabled apps12. For example:
* The following code snippet defines a behaviour definition for a business object ZI_PB_APPLICATION.
It sets the field APPLICATION to read-only for all applications that use this business object:
define behavior for ZI_PB_APPLICATION { field ( read only ) APPLICATION; ... } You cannot do any of the following:
* A. Service definition: A service definition is a CDS artefact that defines the interface and the binding of a service. A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable. However, these properties are only valid for the specific service that uses the business object, not for all applications that use the business object12.
* C. Projection view: A projection view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A projection view can select, rename, or aggregate the fields of the data sources, but it cannot change the properties of the fields, such as whether they are read-only or not. The properties of the fields are inherited from the data sources or the behaviour definitions of the business objects12.
* D. Metadata extension: A metadata extension is a CDS artefact that defines additional annotations for a CDS entity, such as a business object, a service, or a projection view. A metadata extension can specify the properties of the fields of a CDS entity for UI or analytical purposes, such as whether they are visible, editable, or hidden. However, these properties are only valid for the specific UI or analytical application that uses the metadata extension, not for all applications that use the CDS entity12.
References: 1: ABAP CDS - Data Definitions - ABAP Keyword Documentation - SAP Online Help 2: ABAP CDS - Behavior Definitions - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 39 
When accessing the subclass instance through go_super, what can you do? Note: There are 2 correct answers to this question.
- A. Access the inherited private components.
- B. Access the inherited public components.
- C. Call a subclass specific public method
- D. Call inherited public redefined methods.
Answer: A,B
Explanation:
Explanation
When accessing the subclass instance through go_super, you can do both of the following:
Access the inherited private components: A subclass inherits all the private attributes and methods of its superclass, unless they are explicitly overridden by the subclass. Therefore, you can access the inherited private components of the superclass through go_super, as long as they are not hidden by other attributes or methods in the subclass12.
Access the inherited public components: A subclass inherits all the public attributes and methods of its superclass, unless they are explicitly overridden by the subclass. Therefore, you can access the inherited public components of the superclass through go_super, as long as they are not hidden by other attributes or methods in the subclass12.
You cannot do any of the following:
Call a subclass specific public method: A subclass does not have any public methods that are not inherited from its superclass. Therefore, you cannot call a subclass specific public method through go_super12.
Call inherited public redefined methods: A subclass does not have any public methods that are redefined from its superclass. Therefore, you cannot call inherited public redefined methods through go_super12.
References: 1: Object Oriented - ABAP Development - Support Wiki 2: Inheritance and Instantiation - ABAP Keyword Documentation
NEW QUESTION # 40
......
Exam Passing Guarantee C-ABAPD-2309 Exam with Accurate Quastions: https://www.prep4sureguide.com/C-ABAPD-2309-prep4sure-exam-guide.html
Test Engine to Practice Test for C-ABAPD-2309 Valid and Updated Dumps: https://drive.google.com/open?id=1g34Ksej3mk9GYYq6ksLcC730J6xGgffJ