C-ABAPD-2309 Dumps Special Discount for limited time Try FOR FREE
C-ABAPD-2309 Dumps for success in Actual Exam May-2024]
NEW QUESTION # 18
You want to define the following CDS view entity with an input parameter:
Define view entity Z_CONVERT With parameters currency : ???
Which of the following can you use to replace "???? Note: There are 2 correct answers to this question.
- A. A component of an ABAP Dictionary structure
- B. A data element
- C. A built-in ABAP Dictionary type
- D. built-in ABAP type
Answer: B,D
Explanation:
Explanation
The possible replacements for "???" in the CDS view entity definition with an input parameter are A. built-in ABAP type and C. A data element. These are the valid types that can be used to specify the data type of an input parameter in a CDS view entity. A built-in ABAP type is a predefined elementary type in the ABAP language, such as abap.char, abap.numc, abap.dec, etc. A data element is a reusable semantic element in the ABAP Dictionary that defines the technical attributes and the meaning of a field12. For example:
The following code snippet defines a CDS view entity with an input parameter currency of type abap.cuky, which is a built-in ABAP type for currency key:
Define view entity Z_CONVERT With parameters currency : abap.cuky as select from ... { ... } The following code snippet defines a CDS view entity with an input parameter currency of type waers, which is a data element for currency key:
Define view entity Z_CONVERT With parameters currency : waers as select from ... { ... } You cannot do any of the following:
B). A built-in ABAP Dictionary type: This is not a valid type for an input parameter in a CDS view entity. A built-in ABAP Dictionary type is a predefined elementary type in the ABAP Dictionary, such as CHAR, NUMC, DEC, etc. However, these types cannot be used directly in a CDS view entity definition. Instead, they have to be prefixed with abap. to form a built-in ABAP type, as explained above12.
D). A component of an ABAP Dictionary structure: This is not a valid type for an input parameter in a CDS view entity. A component of an ABAP Dictionary structure is a field that belongs to a structure type, which is a complex type that consists of multiple fields. However, an input parameter in a CDS view entity can only be typed with an elementary type, which is a simple type that has no internal structure12.
References: 1: ABAP CDS - SELECT, parameter_list - ABAP Keyword Documentation - SAP Online Help 2:
ABAP Data Types - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 19
Refer to the Exhibit.
Image:
In the following ABAP SQL code, what are valid case distinctions? Note: There are 2 correct answers to this question.
- A.
- B.
- C.
- D.
Answer: A,B
NEW QUESTION # 20
Which of the following actions cause an indirect change to a database table requiring a table conversion? Note: There are 2 correct answers to this question.
- A. Shortening the length of a domain used in a data element that is used in the table definition.
- B. Changing the field labels of a data element that is used in the table definition.
- C. Deleting a field from a structure that is included in the table definition.
- D. Renaming a field in a structure that is included in the table definition
Answer: C,D
Explanation:
The following are the explanations for each action:
A: Renaming a field in a structure that is included in the table definition causes an indirect change to the database table, as the field name in the table is derived from the structure. This change requires a table conversion, as the existing data in the table must be copied to a new table with the new field name, and the old table must be deleted.
B: Changing the field labels of a data element that is used in the table definition does not cause an indirect change to the database table, as the field labels are only used for documentation and display purposes. This change does not require a table conversion, as the existing data in the table is not affected by the change.
C: Deleting a field from a structure that is included in the table definition causes an indirect change to the database table, as the field is removed from the table as well. This change requires a table conversion, as the existing data in the table must be copied to a new table without the deleted field, and the old table must be deleted.
D: Shortening the length of a domain used in a data element that is used in the table definition causes an indirect change to the database table, as the field length in the table is derived from the domain. This change requires a table conversion, as the existing data in the table must be checked for compatibility with the new field length, and any data that exceeds the new length must be truncated or rejected.
NEW QUESTION # 21
What RESTful Application Programming object contains only the fields required for a particular app?
- A. Metadata extension
- B. Data model view
- C. Projection View
- D. Database view
Answer: C
Explanation:
Explanation
A projection view is a RESTful Application Programming object that contains only the fields required for a particular app. A projection view is a CDS view entity that defines a projection on an existing CDS view entity or CDS DDIC-based view. A projection view exposes a subset of the elements of the projected entity, which are relevant for a specific business service. A projection view can also define aliases, virtual elements, and annotations for the projected elements. A projection view is the top-most layer of a CDS data model and prepares data for a particular use case. A projection view can have different provider contracts depending on the type of service it supports, such as transactional query, analytical query, or transactional interface.
A database view is a CDS DDIC-based view that defines a join or union of database tables. A database view has an SQL view attached and can be accessed by Open SQL or native SQL. A database view can be used as a projected entity for a projection view, but it does not contain only the fields required for a particular app.
A metadata extension is a RESTful Application Programming object that defines additional annotations for a CDS view entity or a projection view. A metadata extension can be used to enhance the metadata of a CDS data model without changing the original definition. A metadata extension does not contain any fields, but only annotations.
A data model view is a CDS view entity that defines a data model based on database tables or other CDS view entities. A data model view can have associations, aggregations, filters, parameters, and annotations. A data model view can be used as a projected entity for a projection view, but it does not contain only the fields required for a particular app.
References: CDS Projection Views - ABAP Keyword Documentation, CDS Projection Views in ABAP CDS:
What's Your Flavor, Business Object Projection - ABAP Keyword Documentation
NEW QUESTION # 22
Given the following code in an SAP S/4HANA Cloud private edition tenant:
The class zcl_demo_class is in a software component with the language version set to "ABAP Cloud". The function module ZF1' is in a different software component with the language version set to "Standard ABAP".
Both the class and function module are customer created.
Regarding line #6, which of the following are valid statements? Note: There are 2 correct answers to this question.
- A. ZF1" can be called if a wrapper is created for it but the wrapper itself is not released for cloud development.
- B. "ZF1" can be called whether it is released or not for cloud development
- C. ZF1' can be called only if it is released for cloud development.
- D. 'ZF1' can be called if a wrapper is created for it and the wrapper itself is released for cloud development.
Answer: C,D
Explanation:
Explanation
The ABAP Cloud Development Model requires that only public SAP APIs and extension points are used to access SAP functionality and data. These APIs and extension points are released by SAP and documented in the SAP API Business Hub1. Customer-created function modules are not part of the public SAP APIs and are not released for cloud development. Therefore, calling a function module directly from an ABAP Cloud class is not allowed and will result in a syntax error. However, there are two possible ways to call a function module indirectly from an ABAP Cloud class:
Create a wrapper class or interface for the function module and release it for cloud development. A wrapper is a class or interface that encapsulates the function module and exposes its functionality through public methods or attributes. The wrapper must be created in a software component with the language version set to "Standard ABAP" and must be marked as released for cloud development using the annotation @EndUserText.label. The wrapper can then be called from an ABAP Cloud class using the public methods or attributes2.
Use the ABAP Cloud Connector to call the function module as a remote function call (RFC) from an ABAP Cloud class. The ABAP Cloud Connector is a service that enables the secure and reliable communication between SAP BTP, ABAP environment and on-premise systems. The function module must be exposed as an RFC-enabled function module in the on-premise system and must be registered in the ABAP Cloud Connector. The ABAP Cloud class can then use the class cl_rfc_destination_service to get the destination name and the class cl_abap_system to create a proxy object for the function module. The proxy object can then be used to call the function module3.
References: 1: SAP API Business Hub 2: Creating an ABAP Cloud Project | SAP Help Portal 3: Calling Remote Function Modules | SAP Help Portal
NEW QUESTION # 23
Which field is defined incorrectly?
- A. field1
- B. field4
- C. field3
- D. field2
Answer: B
Explanation:
Explanation
The field4 is defined incorrectly in the ABAP code snippet. The reason is that the data type c (character) cannot have a decimal places specification. The decimal places specification is only valid for the data types p (packed number) and f (floating point number)1. Therefore, the field4 definition should either omit the decimal places specification or change the data type to p or f.
References: 1: Data Types and Data Objects - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 24
Why would you use Access Controls with CDS Views? Note: There are 2 correct answers to this question.
- A. Only the data corresponding to the user's authorization is transferred from the database to the application layer.
- B. You do not have to remember to implement AUTHORITY CHECK statements.
- C. The system field sy-subrc is set, giving you the result of the authorization check
- D. All of the data from the data sources is loaded into your application automatically and filtered there according to the user's authorization.
Answer: A,B
Explanation:
Explanation
You would use Access Controls with CDS Views for the following reasons:
A). Only the data corresponding to the user's authorization is transferred from the database to the application layer. This is true because Access Controls allow you to define CDS roles that specify the authorization conditions for accessing a CDS view. The CDS roles are evaluated for every user at runtime and the system automatically adds the restrictions to the selection conditions of the CDS view.
This ensures that only the data that the user is authorized to see is read from the database and transferred to the application layer. This improves the security and the performance of the data access1.
C). You do not have to remember to implement AUTHORITY CHECK statements. This is true because Access Controls provide a declarative and centralized way of defining the authorization logic for a CDS view. You do not have to write any procedural code or use the AUTHORITY CHECK statement to check the user's authorization for each data source or field. The system handles the authorization check automatically and transparently for you2.
The following reasons are not valid for using Access Controls with CDS Views:
B). The system field sy-subrc is set, giving you the result of the authorization check. This is false because the system field sy-subrc is not used by Access Controls. The sy-subrc field is used by the AUTHORITY CHECK statement to indicate the result of the authorization check, but Access Controls do not use this statement. Instead, Access Controls use CDS roles to filter the data according to the user's authorization2.
D). All of the data from the data sources is loaded into your application automatically and filtered there according to the user's authorization. This is false because Access Controls do not load all the data from the data sources into the application layer. Access Controls filter the data at the database layer, where the data resides, and only transfer the data that the user is authorized to see to the application layer. This reduces the data transfer and the memory consumption of the application layer1.
References: 1: Access Controls | SAP Help Portal 2: ABAP CDS - Access Control - ABAP Keyword Documentation
NEW QUESTION # 25
When processing a loop with the statement DO... ENDDO, what system variable contains the implicit loop counter?
- A. sy-subrc
- B. sy-linno
- C. sy-labix
- D. sy-index
Answer: D
Explanation:
Explanation
When processing a loop with the statement DO... ENDDO, the system variable that contains the implicit loop counter is sy-index. The loop counter is a numeric value that indicates how many times the loop has been executed. The loop counter is initialized to 1 before the first execution of the loop and is incremented by 1 after each execution. The loop counter can be used to control the number of loop iterations or to access the loop elements by index. The loop counter can also be accessed or modified within the loop body, but this is not recommended as it may cause unexpected results or errors1.
For example, the following code snippet uses the loop counter sy-index to display the numbers from 1 to 10:
DO 10 TIMES. WRITE: / sy-index. ENDDO.
The output of this code is:
1 2 3 4 5 6 7 8 9 10
References: 1: DO - ABAP Keyword Documentation
NEW QUESTION # 26
In this nested join below in which way is the join evaluated?
- A. From the right to the left in the order of the tables:
1.
b is joined with c.
2.
b is joined with a. - B. From the top to the bottom in the order of the on conditions
1.
b is joined with c
2.
a is joined with b - C. From the left to the right in the order of the tables:
1.
a is joined with b
2.
b is joined with c - D. From the bottom to the top in the order of the on conditions:
1.
a is joined with b
2.
b is joined with c
Answer: B
Explanation:
Explanation
The nested join is evaluated from the top to the bottom in the order of the ON conditions. This means that the join expression is formed by assigning each ON condition to the directly preceding JOIN from left to right.
The join expression can be parenthesized implicitly or explicitly to show the order of evaluation. In this case, the implicit parentheses are as follows:
SELECT * FROM (a INNER JOIN (b INNER JOIN c ON b~c = c~c) ON a~b = b~b) This means that the first join expression is b INNER JOIN c ON b~c = c~c, which joins the columns of tables b and c based on the condition that b~c equals c~c. The second join expression is a INNER JOIN (b INNER JOIN c ON b~c = c~c) ON a~b = b~b, which joins the columns of table a and the result of the first join expression based on the condition that a~b equals b~b. The final result set contains all combinations of rows from tables a, b, and c that satisfy both join conditions.
References: 1: SELECT, FROM JOIN - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 27
Which of the following is a generic internal table type?
- A. HASHED TABLE
- B. STANDARD TABLE
- C. SORTED TABLE
- D. INDEX TABLE
Answer: D
Explanation:
Explanation
A generic internal table type is a table type that does not define all the attributes of an internal table in the ABAP Dictionary; it leaves some of these attributes undefined. A table type is generic in the following cases1:
You have selected Index Table or Not Specified as the access type.
You have not specified a table key or specified an incomplete table key.
You have specified a generic secondary table key.
A generic table type can be used only for typing formal parameters or field symbols. A generic table type cannot be used for defining data objects or constants2.
Therefore, the correct answer is B.
INDEX TABLE, which is a generic table type that does not specify the access type or the table key. The other options are not generic table types, because:
A). SORTED TABLE is a table type that specifies the access type as sorted and the table key as a unique or non-unique primary key3.
C). STANDARD TABLE is a table type that specifies the access type as standard and the table key as a non-unique standard key that consists of all the fields of the table row in the order in which they are defined4.
D). HASHED TABLE is a table type that specifies the access type as hashed and the table key as a unique primary key5.
References: 1: Generic Table Types - ABAP Dictionary - SAP Online Help 2: Generic ABAP Types - ABAP Keyword Documentation - SAP Online Help 3: Sorted Tables - ABAP Keyword Documentation - SAP Online Help 4: Standard Tables - ABAP Keyword Documentation - SAP Online Help 5: Hashed Tables - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 28
What RESTful Application Programming object contains only the fields required for a particular app?
- A. Metadata extension
- B. Data model view
- C. Projection View
- D. Database view
Answer: C
Explanation:
A projection view is a RESTful Application Programming object that contains only the fields required for a particular app. A projection view is a CDS view entity that defines a projection on an existing CDS view entity or CDS DDIC-based view. A projection view exposes a subset of the elements of the projected entity, which are relevant for a specific business service. A projection view can also define aliases, virtual elements, and annotations for the projected elements. A projection view is the top-most layer of a CDS data model and prepares data for a particular use case. A projection view can have different provider contracts depending on the type of service it supports, such as transactional query, analytical query, or transactional interface.
A database view is a CDS DDIC-based view that defines a join or union of database tables. A database view has an SQL view attached and can be accessed by Open SQL or native SQL. A database view can be used as a projected entity for a projection view, but it does not contain only the fields required for a particular app.
A metadata extension is a RESTful Application Programming object that defines additional annotations for a CDS view entity or a projection view. A metadata extension can be used to enhance the metadata of a CDS data model without changing the original definition. A metadata extension does not contain any fields, but only annotations.
A data model view is a CDS view entity that defines a data model based on database tables or other CDS view entities. A data model view can have associations, aggregations, filters, parameters, and annotations. A data model view can be used as a projected entity for a projection view, but it does not contain only the fields required for a particular app.
NEW QUESTION # 29
When processing a loop with the statement DO... ENDDO, what system variable contains the implicit loop counter?
- A. sy-subrc
- B. sy-linno
- C. sy-labix
- D. sy-index
Answer: D
Explanation:
When processing a loop with the statement DO... ENDDO, the system variable that contains the implicit loop counter is sy-index. The loop counter is a numeric value that indicates how many times the loop has been executed. The loop counter is initialized to 1 before the first execution of the loop and is incremented by 1 after each execution. The loop counter can be used to control the number of loop iterations or to access the loop elements by index. The loop counter can also be accessed or modified within the loop body, but this is not recommended as it may cause unexpected results or errors1.
For example, the following code snippet uses the loop counter sy-index to display the numbers from 1 to 10:
DO 10 TIMES. WRITE: / sy-index. ENDDO.
The output of this code is:
1 2 3 4 5 6 7 8 9 10
NEW QUESTION # 30
Which patterns raise an exception? Note: There are 3 correct answers to this question.
- A. DATA: gv_target TYPE c LENGTH 5. V CONSTANTS: ECO string TYPE string VALUE
0123456789ABCDEF". gv_target - EXACT (gco_string + 5 (6) ). - B. DATA: gv_target TYPE string. CONSTANTS: gco_string TYPE LENGTH 16 VALUE
0123456789ABCDEF*. gv_target = EXACT # gco_string+5 (5) ). - C. DATA: Ev target TYPE p DECIMALS 3. CONSTANTS: gcojntl TYPE i VALUE 2. Ev_target -U EXACT #2 / gcojntl ).
- D. DATA: gv_target TYPE p DECIMALS 2. CONSTANTS: go intl TYPE i VALUE 3. gv_target -U EXACT (2 gcojntl).
- E. DATA: gv_target TYPE d. s/ CONSTANTS: gco_date TYPE d VALUE '20331233*. gv_target EXACT ( geo_date).
Answer: A,D,E
Explanation:
Explanation
The patterns that raise an exception are those that use the constructor operator EXACT to perform a lossless assignment or calculation, but the result cannot be converted to the target data type without data loss. The following are the explanations for each pattern:
A: This pattern raises the exception CX_SY_CONVERSION_LOST because the result of the calculation 2 * 3 is 6, which cannot be assigned to a packed number with two decimal places without losing the integer part. The operator -U is used to perform a lossless calculation with the calculation type decfloat34.
B: This pattern does not raise an exception because the result of the substring expression gco_string+5(5) is '6789A', which can be assigned to a string without data loss. The operator EXACT # is used to perform a lossless assignment with the data type of the argument.
C: This pattern raises the exception CX_SY_CONVERSION_LOST because the result of the substring expression gco_string+5(6) is '6789AB', which cannot be assigned to a character field with length 5 without losing the last character. The operator EXACT is used to perform a lossless assignment with the data type of the target field.
D: This pattern does not raise an exception because the result of the calculation 2 / 2 is 1, which can be assigned to a packed number with three decimal places without data loss. The operator -U is used to perform a lossless calculation with the calculation type decfloat34.
E: This pattern raises the exception CX_SY_CONVERSION_ERROR because the constant gco_date contains an invalid value '20331233' for a date data type, which cannot be converted to a valid date.
The operator EXACT is used to perform a lossless assignment with the data type of the target field.
References: EXACT - Lossless Operator - ABAP Keyword Documentation, Lossless Assignments - ABAP Keyword Documentation
NEW QUESTION # 31
What would be the correct expression to change a given string value 'mr joe doe' into 'JOE' in an ABAP SQL field list?
- A. SELECT FROM TABLE dbtabl FIELDS
Of1,
substring(lower(upper( 'mr joe doe' ) ), 4, 3) AS f2_sub_lo_up, f3, - B. SELECT FROM TABLE dbtabl FIELDS
Of1,
left(lower(substring( 'mr joe doe', 4, 3)), 3) AS f2_left_lo_sub, f3, - C. SELECT FROM TABLE dbtabl FIELDS
Of1,
substring(upper('mr joe doe'), 4, 3) AS f2_sub_up, f3,... - D. SELECT FROM TABLE dbtabl FIELDS
Of1,
upper(left( 'mr joe doe', 6)) AS f2_up_left, f3,
Answer: C
Explanation:
Explanation
The correct expression to change a given string value 'mr joe doe' into 'JOE' in an ABAP SQL field list is
C). SELECT FROM TABLE dbtabl FIELDS Of1, substring(upper('mr joe doe'), 4, 3) AS f2_sub_up, f3,...
This expression uses the following SQL functions for strings12:
upper: This function converts all lowercase characters in a string to uppercase. For example, upper('mr joe doe') returns 'MR JOE DOE'.
substring: This function returns a substring of a given string starting from a specified position and with a specified length. For example, substring('MR JOE DOE', 4, 3) returns 'JOE'.
AS: This keyword assigns an alias or a temporary name to a field or an expression in the field list. For example, AS f2_sub_up assigns the name f2_sub_up to the expression substring(upper('mr joe doe'), 4, 3).
You cannot do any of the following:
A). SELECT FROM TABLE dbtabl FIELDS Of1, upper(left( 'mr joe doe', 6)) AS f2_up_left, f3,...:
This expression uses the wrong SQL function for strings to get the desired result. The left function returns the leftmost characters of a string with a specified length, ignoring the trailing blanks. For example, left( 'mr joe doe', 6) returns 'mr joe'. Applying the upper function to this result returns 'MR JOE', which is not the same as 'JOE'.
B). SELECT FROM TABLE dbtabl FIELDS Of1, left(lower(substring( 'mr joe doe', 4, 3)), 3) AS f2_left_lo_sub, f3,...: This expression uses unnecessary and incorrect SQL functions for strings to get the desired result. The lower function converts all uppercase characters in a string to lowercase. For example, lower(substring( 'mr joe doe', 4, 3)) returns 'joe'. Applying the left function to this result with the same length returns 'joe' again, which is not the same as 'JOE'.
D). SELECT FROM TABLE dbtabl FIELDS Of1, substring(lower(upper( 'mr joe doe' ) ), 4, 3) AS f2_sub_lo_up, f3,...: This expression uses unnecessary and incorrect SQL functions for strings to get the desired result. The lower function converts all uppercase characters in a string to lowercase, and the upper function converts all lowercase characters in a string to uppercase. Applying both functions to the same string cancels out the effect of each other and returns the original string. For example, lower(upper( 'mr joe doe' ) ) returns 'mr joe doe'.
Applying the substring function to this result returns 'joe', which is not the same as 'JOE'.
References: 1: SQL Functions for Strings - ABAP Keyword Documentation - SAP Online Help 2: sql_func - String Functions - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 32
Exhibit:
Which of the following statements are correct? Note: There are 2 correct answers to this question.
- A. row is a predefined name and cannot be chosen arbitrarily.
- B. row is only visible within the loop.
- C. FOR defines a loop that runs over the content of source_itab
- D. source_itab is only visible within the loop.
Answer: B,C
Explanation:
The code snippet in the image is an example of using the FOR statement to create an internal table with a constructor expression. The FOR statement introduces an iteration expression that runs over the content of source_itab and assigns each row to the variable row. The variable row is then used to populate the fields of target_itab12. Some of the correct statements about the code snippet are:
FOR defines a loop that runs over the content of source_itab: This is true. The FOR statement iterates over the rows of source_itab and assigns each row to the variable row. The iteration expression can also specify a range or a condition for the loop12.
row is only visible within the loop: This is true. The variable row is a local variable that is only visible within the scope of the iteration expression. It cannot be accessed outside the loop12.
You cannot do any of the following:
source_itab is only visible within the loop: This is false. The variable source_itab is not a local variable that is defined by the FOR statement. It is an existing internal table that is used as the data source for the iteration expression. It can be accessed outside the loop12.
row is a predefined name and cannot be chosen arbitrarily: This is false. The variable row is not a predefined name that is reserved by the FOR statement. It is a user-defined name that can be chosen arbitrarily. However, it must not conflict with any existing names in the program12.
NEW QUESTION # 33
Exhibit
Which of the following ABAP SQL snippets are syntactically correct ways to provide a value for the parameter on line #4? Note: There are 2 correct answers to this question
- A. ...SELECT * FROM deno_cds_param_view_entity (p_date = @
(cl_abap_context_info->get_system_date ())... - B. ...SELECT * FROM demo_cds_param_view_entity (p_date: 20238181')... )
- C. ...SELECT * FROM deno_cds_param_view_entity (p_date - '20230101')... )
- D. ...SELECT * FROM demo_cds_param_view entity (p_date: $session.system_date)...
Answer: A,C
NEW QUESTION # 34 
Which of the following types are permitted to be used for <source> on line #4? Note: There are 2 correct answers to this question.
- A. A database table from the ABAP Dictionary
- B. A CDS DDIC-based view
- C. A database view from the ABAP Dictionary
- D. An external view from the ABAP Dictionary
Answer: A,B
Explanation:
Explanation
The <source> clause in the CDS View Entity Data Definition can be used to specify the data source for the view entity. The <source> clause can accept different types of data sources, depending on the type of the view entity1.
A database table from the ABAP Dictionary: This is a valid type of data source for a CDS View Entity Data Definition. A database table from the ABAP Dictionary is a table that is defined in the ABAP Dictionary using the keyword TABLE or TABLE OF. The name of the database table must be unique within its namespace and must not contain any special characters2.
A CDS DDIC-based view: This is also a valid type of data source for a CDS View Entity Data Definition. A CDS DDIC-based view is a view that is defined in the Core Data Services using the keyword DEFINE VIEW ENTITY. The name of the CDS DDIC-based view must be unique within its namespace and must not contain any special characters3.
You cannot do any of the following:
An external view from the ABAP Dictionary: This is not a valid type of data source for a CDS View Entity Data Definition. An external view from the ABAP Dictionary is a view that is defined in an external application using any language supported by SAP, such as SQL, PL/SQL, or Java. The name of the external view must be unique within its namespace and must not contain any special characters4.
A database view from the ABAP Dictionary: This is not a valid type of data source for a CDS View Entity Data Definition. A database view from the ABAP Dictionary is a view that is defined in an external application using any language supported by SAP, such as SQL, PL/SQL, or Java. The name of the database view must be unique within its namespace and must not contain any special characters4.
References: 1: CDS DDL - DEFINE VIEW ENTITY - ABAP Keyword Documentation - SAP Online Help 2:
ABAP Dictionary Tables - SAP Online Help 3: CDS DDL - DEFINE VIEW ENTITY - ABAP Keyword Documentation - SAP Online Help 4: ABAP Dictionary Views - SAP Online Help
NEW QUESTION # 35
Which type of legacy code does SAP recommend you eliminate when you review modifications as part of an SAP S/4HANA system conversion? Note: There are 2 correct answers to this question.
- A. Code that has less than 10% usage according to usage statistics
- B. Code that can be redesigned as a key user extension
- C. Code that now is identical to a standard SAP object
- D. Code that supports a critical business process
Answer: B,C
Explanation:
SAP recommends that you eliminate the following types of legacy code when you review modifications as part of an SAP S/4HANA system conversion:
Code that now is identical to a standard SAP object. This type of code is redundant and unnecessary, as it does not provide any additional functionality or customization. It can also cause conflicts or errors during the system conversion, as the standard SAP object may have changed or been replaced in SAP S/4HANA. Therefore, you should delete this type of code and use the standard SAP object instead.
Code that can be redesigned as a key user extension. This type of code is usually related to UI or business logic adaptations that can be achieved using the in-app tools provided by SAP S/4HANA. By redesigning this type of code as a key user extension, you can simplify and standardize your code base, reduce maintenance efforts, and avoid compatibility issues during the system conversion. Therefore, you should migrate this type of code to the key user extensibility framework and delete the original code.
The other types of legacy code are not recommended to be eliminated, as they may still be relevant or necessary for your business processes. However, you should still review and adjust them according to the SAP S/4HANA simplification items and best practices. These types of code are:
Code that supports a critical business process. This type of code is essential for your business operations and cannot be easily replaced or removed. However, you should check if this type of code is compatible with SAP S/4HANA, and if not, you should adapt it accordingly. You should also consider if this type of code can be optimized or enhanced using the new features and capabilities of SAP S/4HANA.
Code that has less than 10% usage according to usage statistics. This type of code is rarely used and may not be worth maintaining or converting. However, you should not delete this type of code without verifying its relevance and impact on your business processes. You should also consider if this type of code can be replaced or consolidated with other code that has higher usage or better performance.
NEW QUESTION # 36
What are some of the reasons that Core Data Services are preferable to the classical approach to data modeling? Note: There are 2 correct answers to this question.
- A. They transfer computational results to the application server.
- B. They avoid data transfer completely.
- C. They implement code pushdown.
- D. They compute results on the application server.
Answer: A,C
Explanation:
Explanation
Core Data Services (CDS) are preferable to the classical approach to data modeling for several reasons, but two of them are:
They implement code pushdown. Code pushdown is the principle of moving data-intensive logic from the application server to the database server, where the data resides. This reduces the data transfer between the application server and the database server, which improves the performance and scalability of the application. CDS enable code pushdown by allowing the definition of semantic data models and business logic in the database layer, using SQL and SQL-based expressions1.
They transfer computational results to the application server. CDS allow the application server to access the data and the logic defined in the database layer by using Open SQL statements. Open SQL is a standardized and simplified subset of SQL that can be used across different database platforms. Open SQL statements are translated into native SQL statements by the ABAP runtime environment and executed on the database server. The results of the computation are then transferred to the application server, where they can be further processed or displayed2.
References: 1: ABAP - Core Data Services (ABAP CDS) - ABAP Keyword Documentation 2: Open SQL - ABAP Keyword Documentation
NEW QUESTION # 37
Which of the following string functions are predicate functions? Note: There are 2 correct answers to this question.
- A. matchesQ
- B. contains_any_of()
- C. count_any_of()
- D. find_any_not_of()
Answer: A,B
Explanation:
String functions are expressions that can be used to manipulate character-like data in ABAP. String functions can be either predicate functions or non-predicate functions. Predicate functions are string functions that return a truth value (true or false) for a condition of the argument text. Non-predicate functions are string functions that return a character-like result for an operation on the argument text1.
The following string functions are predicate functions:
B) contains_any_of(): This function returns true if the argument text contains at least one of the characters specified in the character set. For example, the following expression returns true, because the text 'ABAP' contains at least one of the characters 'A', 'B', or 'C':
contains_any_of( val = 'ABAP' set = 'ABC' ).
D) matches(): This function returns true if the argument text matches the pattern specified in the regular expression. For example, the following expression returns true, because the text 'ABAP' matches the pattern that consists of four uppercase letters:
matches( val = 'ABAP' regex = '[A-Z]{4}' ).
The following string functions are not predicate functions, because they return a character-like result, not a truth value:
A) find_any_not_of(): This function returns the position of the first character in the argument text that is not contained in the character set. If no such character is found, the function returns 0. For example, the following expression returns 3, because the third character of the text 'ABAP' is not contained in the character set 'ABC':
find_any_not_of( val = 'ABAP' set = 'ABC' ).
C) count_any_of(): This function returns the number of characters in the argument text that are contained in the character set. For example, the following expression returns 2, because there are two characters in the text 'ABAP' that are contained in the character set 'ABC':
count_any_of( val = 'ABAP' set = 'ABC' ).
NEW QUESTION # 38
In what order are objects created to generate a RESTful Application Programming application?
- A. Data model view 2
- B. Service definition 3
- C. Database table 1
- D. B D C A
- E. A D C B
- F. D A B C
- G. C B A B
- H. Service binding Projection view 4
Answer: B
Explanation:
Explanation
The order in which objects are created to generate a RESTful Application Programming application is A, D, C, B.
This means that the following steps are followed:
First, a database table is created to store the data for the application. A database table is a CDS DDIC-based view that defines a join or union of database tables. A database table has an SQL view attached and can be accessed by Open SQL or native SQL.
Second, a data model view is created to define a data model based on the database table or other CDS view entities. A data model view is a CDS view entity that can have associations, aggregations, filters, parameters, and annotations. A data model view can also define the behavior definition and implementation for the business object.
Third, a service definition is created to define the service interface for the application. A service definition is a CDS view entity that defines a projection on a data model view or another service definition. A service definition can also define service metadata, such as service name, version, description, and annotations.
Fourth, a service binding is created to define the service binding for the application. A service binding is a CDS view entity that defines a projection on a service definition. A service binding can also define the service protocol, such as OData V2, OData V4, or REST, and the service URL.
References: CDS Data Model Views - ABAP Keyword Documentation, CDS Service Definitions - ABAP Keyword Documentation, CDS Service Bindings - ABAP Keyword Documentation, CDS Projection Views - ABAP Keyword Documentation
NEW QUESTION # 39
/DMO/I_Connection is a CDS view.
What variable type is connection full based on the following code? DATA connection full TYPE
/DMD/I_Connection.
- A. Simple variable
- B. Structure
- C. Internal Table
Answer: B
NEW QUESTION # 40
Which of the following are features of Core Data Services? Note: There are 3 correct answers to this question.
- A. Annotations
- B. Inheritance
- C. Delegation
- D. Structured Query Language (SQL)
- E. Associations
Answer: A,D,E
Explanation:
Explanation
Core Data Services (CDS) is a framework for defining and consuming semantically rich data models in SAP HANA. CDS supports various features that enhance the capabilities of SQL and enable developers to create data models that are optimized for performance, readability, and extensibility12. Some of the features of CDS are:
Associations: Associations are a way of defining relationships between CDS entities, such as tables or views. Associations enable navigation and path expressions in CDS queries, which allow accessing data from related entities without explicit joins. Associations also support cardinality, referential constraints, and cascading options34.
Annotations: Annotations are a way of adding metadata to CDS entities or their elements, such as fields or parameters. Annotations provide additionalinformation or instructions for the CDS compiler, the database, or the consumers of the CDS views. Annotations can be used for various purposes, such as defining access control, UI rendering, OData exposure, or search capabilities5 .
Structured Query Language (SQL): SQL is the standard language for querying and manipulating data in relational databases. CDS is based on SQL and extends it with additional features and syntax. CDS supports SQL features such as joins, aggregations, filters, expressions, functions, and subqueries. CDS also supports SQL Script, which is a scripting language for stored procedures and functions in SAP HANA .
You cannot do any of the following:
Inheritance: Inheritance is not a feature of CDS. Inheritance is a concept in object-oriented programming that allows a class to inherit the properties and methods of another class. CDS does not support object-oriented programming or classes.
Delegation: Delegation is not a feature of CDS. Delegation is a concept in object-oriented programming that allows an object to delegate some of its responsibilities to another object. CDS does not support object-oriented programming or objects.
References: 1: Core Data Services (CDS) | CAPire 2: Core Data Services [CDS] in SAP S/4 HANA | SAP Blogs 3: Associations in Core Data Services (CDS) | SAP Help Portal 4: [CDS DDL - Association - ABAP Keyword Documentation - SAP Online Help] 5: [Annotations in Core Data Services (CDS) | SAP Help Portal]
[CDS DDL - Annotation - ABAP Keyword Documentation - SAP Online Help] : [Structured Query Language (SQL) | SAP Help Portal] : [CDS DDL - SQL Features - ABAP Keyword Documentation - SAP Online Help] : [Object-Oriented Programming in ABAP | SAP Help Portal]
NEW QUESTION # 41
Exhibit:
What are valid statements? Note: There are 3 correct answers to this question.
- A. Instead of go_cll = NEW #() you could use go_iff - NEW #(...).
- B. go_cll may call method ml with go_dl->ifl-ml().
- C. Instead of go ell = NEW #(...) you could use go ifl = NEW cll(. ... ).
- D. go_ifl may call method m2 with go if->m2(...).
- E. go_if 1 may call method ml with go_ift->ml().
Answer: C,D,E
Explanation:
The following are the explanations for each statement:
A: This statement is valid. go_ifl may call method ml with go_ifl->ml(). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The interface ifl defines a method ml, which can be called using the reference variable go_ifl. The class cll implements the interface ifl, which means that it provides an implementation of the method ml. The data object go_ifl is assigned to a new instance of the class cll using the NEW operator and the inline declaration operator @DATA. Therefore, when go_ifl->ml() is called, the implementation of the method ml in the class cll is executed123 B: This statement is valid. Instead of go_cll = NEW #(...) you could use go_ifl = NEW cll(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The class cll implements the interface ifl, which means that it is compatible with the interface ifl. Therefore, go_ifl can be assigned to a new instance of the class cll using the NEW operator and the class name cll. The inline declaration operator @DATA is optional in this case, as go_ifl is already declared. The parentheses after the class name cll can be used to pass parameters to the constructor of the class cll, if any123 E: This statement is valid. go_ifl may call method m2 with go_ifl->m2(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The class cll implements the interface ifl, which means that it inherits all the components of the interface ifl. The class cll also defines a method m2, which is a public method of the class cll. Therefore, go_ifl can call the method m2 using the reference variable go_ifl. The method m2 is not defined in the interface ifl, but it is accessible through the interface ifl, as the interface ifl is implemented by the class cll. The parentheses after the method name m2 can be used to pass parameters to the method m2, if any123 The other statements are not valid, as they have syntax errors or logical errors. These statements are:
C: This statement is not valid. go_cll may call method ml with go_cll->ifl~ml(). This is because go_cll is a data object of type REF TO cll, which is a reference to the class cll. The class cll implements the interface ifl, which means that it inherits all the components of the interface ifl. The interface ifl defines a method ml, which can be called using the reference variable go_cll. However, the syntax for calling an interface method using a class reference is go_cll->ml(), not go_cll->ifl~ml(). The interface component selector ~ is only used when calling an interface method using an interface reference, such as go_ifl->ifl~ml(). Using the interface component selector ~ with a class reference will cause a syntax error123 D: This statement is not valid. Instead of go_cll = NEW #() you could use go_ifl = NEW #(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The interface ifl cannot be instantiated, as it does not have an implementation. Therefore, go_ifl cannot be assigned to a new instance of the interface ifl using the NEW operator and the inline declaration operator @DATA. This will cause a syntax error or a runtime error. To instantiate an interface, you need to use a class that implements the interface, such as the class cll123
NEW QUESTION # 42
/DMO/I_Connection is a CDS view.
What variable type is connection full based on the following code? DATA connection full TYPE
/DMD/I_Connection.
- A. Simple variable
- B. Structure
- C. Internal Table
Answer: B
Explanation:
Explanation
Based on the following code, the variable type of connection_full is a structure. A structure is a complex data type that consists of a group of related data objects, called components, that have their own data types and names. A structure can be defined using the TYPES statement or based on an existing structure type, such as a CDS view entity or a CDS DDIC-based view. In this case, the variable connection_full is declared using the TYPE addition, which means that it has the same structure type as the CDS view entity /DMO/I_Connection.
The CDS view entity /DMO/I_Connection is a data model view that defines a data model based on the database table /DMO/Connection. The CDS view entity /DMO/I_Connection has the following components:
carrid, connid, airpfrom, airpto, distance, and fltime. Therefore, the variable connection_full has the same components as the CDS view entity /DMO/I_Connection, and each component has the same data type and length as the corresponding field in the database table /DMO/Connection.
References: CDS Data Model Views - ABAP Keyword Documentation, DATA - ABAP Keyword Documentation, Structure Types - ABAP Keyword Documentation
NEW QUESTION # 43
......
Accurate C-ABAPD-2309 Answers 365 Days Free Updates: https://www.prep4sureguide.com/C-ABAPD-2309-prep4sure-exam-guide.html
Realistic C-ABAPD-2309 100% Pass Guaranteed Download Exam Q&A: https://drive.google.com/open?id=19AVZIi9fyNkWy8Sjr3Rxgb6wrHbnBurM