C_S4TM_2023 Tested & Approved SAP Certified Associate Study Materials
Validate your Skills with Updated SAP Certified Associate Exam Questions & Answers and Test Engine
NEW QUESTION # 24
You add an assessorial charge to a freight order after the freight settlement document (FSD) has been transferred and accruals have been posted in SAP ERR The background report to create FSDs determines the change strategy 'Reverse and Repost with new FSD1 for this freight order.
What will you see in SAP TM and SAP ERP?
There are 2 correct answers to this question.
- A. 2 Service entry sheets in SAP ERP
- B. 3 Service entry sheets in SAP ERP
- C. 2 FSDs in SAP TM
- D. 2 FSDs and a Credit memo in SAP TM
Answer: A,D
NEW QUESTION # 25
A separate license for SAP EHS is required before it can be integrated with your installation of SAP TM, determine whether this statement is true or false.
- A. true
- B. false
Answer: A
NEW QUESTION # 26
What functionality is available with Basic Shipping in SAP S/4HANA Supply Chain for transportation management? Note: There are 3 correct answers to this question.
- A. Transportation Planning based on sales orders
- B. Transportation Planning based on outbound deliveries
- C. Transportation Planning based on forwarding orders
- D. Transportation Planning based on inbound deliveries
- E. Transportation execution without event management
Answer: B,D,E
Explanation:
Transportation Management Overview and Fundamentals
NEW QUESTION # 27
What is used as the source location of the OTR? Please choose the correct answer.
- A. Forwarding orders
- B. Delivery-based transportation requirements
- C. The shipping point determined in ERR
- D. Order-based transportation requirements
Answer: C
NEW QUESTION # 28
In a strategic freight procurement process how can you influence that fuel surcharge do NOT Exceed the base charges quoted by a carrier?
- A. Define business shares
- B. Enable bonus-malus logic
- C. Publish target rates
- D. Define target shares
Answer: C
NEW QUESTION # 29
Which of the following are attributes of trade lanes?
Note: There are 2 correct answers to this question.
- A. Dangerous goods indicator
- B. Transportation group
- C. Means of transport
- D. Transportation mode
Answer: C,D
NEW QUESTION # 30
What do you need to maintain to ensure that certain products are always shipped by air?
- A. Compartments
- B. Incompatibilities
- C. Allocations
- D. Instructions
Answer: B
NEW QUESTION # 31
You are implementing a side-by-side scenario integrating sales orders and outbound deliveries to transportation management. Sales order integration has created 30 freight units for 1 sales order (1 freight unit per sales order item). During planning, the freight units were assigned to 3 trucks (10 freight units or each truck). Based on this planning result, delivery creation is triggered. During packaging, up to
3 items can be packed into 1 case. What is the minimum number of freight units that exist in transportation management at the end of this process?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Transportation Planning
NEW QUESTION # 32
What is automatically determined based on the object being transferred from ERP when location data is created via the CIF. Please choose the correct answer.
- A. Give operators
- B. The location type
- C. Intuitive mobile
- D. MES Access
Answer: B
NEW QUESTION # 33
You have defined several means of transport (MTR) combinations.
If food is loaded on the truck, you cannot transport hazardous goods in a coupled trailer. Furthermore, these hazardous goods cannot be transported on certain means of transport.
Which of the following incompatibility types do you use to model this scenario?
There are 2 correct answers to this question.
- A. FU -Vehicle resource
- B. FU - FU (vehicle level)
- C. FU - FU (compartment level)
- D. FU - FU (MT combination level)
Answer: B,C
NEW QUESTION # 34
You want to use destination-based distance costs when planning freight orders with the VSR optimizer.
What MUST you define?
- A. Planning strategy VSR_DEF in the optimizer settings
- B. Costs for distance in the constraints and cost settings
- C. Costs for distance in the transportation lane
- D. A freight unit building rule that does NOT use default routes
Answer: C
Explanation:
Transportation Planning
NEW QUESTION # 35
Which of the following SAP TM and SAP ERP objects can you map?
There are 2 correct answers to this question.
- A. SAP TM charge category to SAP ERP G/L account
- B. SAP TM charge type to SAP ERP service material group
- C. SAP TM purchasing organization to SAP ERP plant
- D. SAP TM charge type to SAP ERP service master
Answer: C,D
NEW QUESTION # 36
A carrier has responded to your request for quotation but was NOT automatically assigned to the freight order. What could be reasons for this? Note: There are 2 correct answers to this question.
- A. The tendering process was set to "Direct Tendering - Send Freight Order Directly".
- B. The tendering profile contains a subsequent step.
- C. The carrier responded after the response time had expired.
- D. The program to evaluate freight quotations was NOT executed.
Answer: C,D
NEW QUESTION # 37
Master data can only be created directly in SAP TM. determine whether this statement is true or false.
- A. true
- B. false
Answer: B
NEW QUESTION # 38
You want to make sure that a particular forwarding house is entered as the ordering party in a freight order based on the ID of the consignee. What do you have to define in Customizing for the freight order type?
- A. Default change controller strategy
- B. Organizational unit determination condition
- C. Partner determination profile
- D. Determination based on first location
Answer: C
NEW QUESTION # 39
In a shipper-to-logistics service provider (LSP) B2B scenario, both parties are using SAP Transportation Management. The LSP will plan and execute transportation for the shipper.
Which documents are involved? Note: There are 2 correct answers to this question.
- A. LSP's forwarding quotation
- B. LSP's service order
- C. Shipper's freight order
- D. Shipper's freight unit
Answer: A,C
Explanation:
Transportation Management for Logistics Service Provider (LSP)
NEW QUESTION # 40
You want to make sure that a particular forwarding house is entered as the ordering party in a freight order based on the ID of the consignee. What do you have to define in Customizing for the freight order type?
- A. Shipper/consignee determination
- B. Creation strategy
- C. Organizational unit determination condition
- D. Partner determination profile
Answer: D
Explanation:
Freight Order Management
NEW QUESTION # 41
In an ERP system that is processing sales orders, situations arise when an order is created for a new customer that is a one time transaction. Transportation will have to be planned and this could cause a large amount of master data that will quickly become obsolete.
One-time-ship-to locations can be created in two ways, as follows:
There are 2 correct answers to this question.
- A. Automatically (by the system), based on the address of an incoming transportation request to SAP TM
- B. Manually, by the user in the forwarding order user interface
- C. Division
Answer: A,B
NEW QUESTION # 42
What functionality is achieved by using a handover location from SAP ERP document in SAP TM? Note: There are 2 correct answers to this question.
- A. To override incoterrn location from SAP ERP document
- B. To split freight unit stages in an order-based transportation requirement
- C. To split freight unit stages in a delivery-based transportation requirement
- D. To detemline planning relevance of stages in a freight unit
Answer: A,B
NEW QUESTION # 43
You have completed the configuration tasks for cost distribution and freight settlement in SAP TM and SAP ERP. The settlement documents were successfully transferred to SAP ERP.
Which of the following business documents in SAP ERP would you check to verify that the amounts and postings are correct?
There are 2 correct answers to this question.
- A. Agency billing document
- B. Service entry sheet
- C. Shipment cost document
- D. Freight invoice
Answer: B,C
NEW QUESTION # 44
What does SAP ERP do when a split request is received from SAP TM?
There are 3 correct answers to this question.
- A. SAP ERP changes the original outbound delivery document
- B. SAP ERP sends a POP_TRANSPORTATIONREQUESTSUITEREQUEST_OUT message to TM
- C. SAP ERP informs SAP TM whether the delivery split was successful
- D. SAP ERP triggers a TRRoutput from the original delivery document
- E. SAP ERP creates a new outbound delivery document
Answer: A,B,C
NEW QUESTION # 45
......
SAP C_S4TM_2023 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
C_S4TM_2023 [Jun-2025] Newly Released] C_S4TM_2023 Exam Questions For You To Pass: https://www.prep4sureguide.com/C_S4TM_2023-prep4sure-exam-guide.html
For your comfort, Prep4sureGuide provides you the convenience of free SAP Certified Associate braindumps demo: https://drive.google.com/open?id=1_zsMI0ZjDOOtmba3kvcjVGUL3UfhBuZt