Updated PDF (New 2021) Actual VMware 5V0-11.21 Exam Questions
Verified 5V0-11.21 Exam Dumps PDF [2021] Access using Prep4sureGuide
NEW QUESTION 26
A new VMware Cloud on AWS customer has previously deployed a VMware Horizon-based VDI solution into their data centerto support their remote developer workforce. Due to unforeseen growth, the company needs to quickly expand their remote workforce. The growth will consume any forecast capacity in the VDI solution and, therefore, additional capacity is now required. The VDI solution service owner would like the solution to support the ability to quickly scale in/out to provide additional capacity based on demand. Which three steps should the administrator take to scale out the VDI solution? (Choose three.)
- A. Deploy a new VMware Horizon pod on-premises.
- B. Configure network connectivity and firewall rules to allow communications between on-premises and VMware Cloud on AWS connection servers.
- C. Connect the two VMware Horizon pods together using the security servers.
- D. Connect the two VMware Horizon pods together using a Horizon Cloud Pod Architecture (CPA).
- E. Deploy a new VMware Horizon pod on VMware Cloud on AWS.
- F. Configure network connectivity and firewall rules to allow communications between the two on-premises connection servers.
Answer: A,B,D
NEW QUESTION 27
An architect is designing a company's hybrid cloud environment. Traffic between their local data center and VMC on AWS software-defined data center (SDDC) requires a high-speed, low latency connection. The connection type should also support connectivity to services currently being consumed in AWS. Which connection type will meet these requirements?
- A. AWS Direct Connect
- B. Route-based VPN
- C. Four IPSec tunnels for greater bandwidth & resiliency
- D. Multiprotocol Label Switching (MPLS)
Answer: A
NEW QUESTION 28
An environment is running a cluster with six i3.metal hosts in the VMware Cloud on AWS software-defined data center (SDDC). If one host fails, what happens after a new host is automatically added to the cluster?
- A. The VMware vSAN rebuild starts in the background. Performance might be degraded during rebuild and the failures to tolerate (hi I) is lowered to 1.
- B. The SDDC and NVMe drives backing VMware vSAN capacity are unmounted from the failed host and attached to the new host. There is no VMware vSAN rebuild required.
- C. The VMware vSAN rebuild starts in the background. Performance might be degraded during rebuild and the failures to tolerate (hi I) is lowered to 0.
- D. A notification is received from VMware Support to start the VMware vSAN rebuild. Performance might be degraded during rebuild.
Answer: A
NEW QUESTION 29
A customer wants to ensure that VMware Cloud on AWS maintenance operations are performed during their maintenance window. Which option would allow the customer to achieve this outcome?
- A. Schedule a maintenance preference in the software-defined data center (SDDC) console.
- B. Schedule a call with AWS Support and schedule a maintenance window.
- C. Schedule a maintenance window through an online support request.
- D. Schedule a call with VMware Cloud on AWS Support and schedule a maintenance window.
Answer: A
NEW QUESTION 30
To assist with seasonal workload demands over the next two months, a group of interns are hired to assist with day 2 virtual machine operations in VMware Cloud on AWS. Which method should be used for creating these temporary user accounts and assigning the appropriate permissions to them?
- A. Log into vCenter in VMware Cloud on AWS with the CloudAdmin account. Create the required number of user accounts in the vmc.local SSO domain and assign the appropriate roles to the accounts.
- B. Log into vCenter in VMware Cloud on AWS with the CloudAdmin account. Create the required number of user accounts in the vsphere. local SSO domain and assign the appropriate roles to the accounts in Active Directory.
- C. Create the required user accounts within Active Directory and assign them to the required group. With Hybrid Linked Mode enabled, assign the correct role in VMware Cloud on AWS to the Active Directory group that contains the user accounts.
- D. Log into on-premises VMware vCenter. Create the required number of user accounts in the vsphere. local SSO domain and assign the appropriate roles to the accounts. Ensure that Hybrid Linked Mode is enabled to allow account propagation to the VMware Cloud on AWS SSO domain.
Answer: D
NEW QUESTION 31
A user with an Organization Member role would like to add another user to an organization. How would this be accomplished?
- A. The user with an Organization Member role will be able to add a new user through the Identity and Access Management page.
- B. Only users with an Organization Owner role can invite and add users to the organization.
- C. Users with an Organization Member role are automatically granted access to all roles within VMware Cloud on AWS.
- D. The user with an Organization Member role needs to have CloudAdmin permissions in order to add a new user.
Answer: B
NEW QUESTION 32
Upon connecting a VMware Managed Transit Gateway (VTGW), the administrator discovers that there is an overlapping workload CIDR bleck. How will the software-defined data center (SDDC) handle the overlapping IP space?
- A. It will ensure both CIDR blocks work in both locations.
- B. It will reject the remote IP space.
- C. It will isolate the overlapping segment in the cloud.
- D. It will allow the overlapping IP space.
Answer: D
NEW QUESTION 33
An administrator deploys a virtual machine and configures it to perform backups to an AWS Simple Storage Service (S3) bucket. After the first month of use, the administrator receives a bill from AWS indicating egress charges were applied to the backup traffic leaving the software-defined data center (SDCC), destined for the AWS S3 bucket. What can the administrator do to ensure backup traffic travels to the linked Amazon Virtual Private Cloud (VPC) through the Elastic Network Interface?
- A. Configure the S3 bucket with a public endpoint accessible over the Internet through HTTPS.
- B. Configure a route-based virtual private network (VPN) for the SDDC to the VPC.
- C. Create a gateway endpoint in the linked AWS VPC and configure it for use with the S3 bucket.
- D. Configure Direct Connect to a private virtual interface for access to AWS services.
Answer: B
NEW QUESTION 34
Refer to the exhibit.
An administrator builds a software-defined data center (SDDC) group to enable connectivity to native Amazon Virtual Private Clouds (VPCs). Which connectivity option is needed to enable connectivity across environments?
- A. Transit Gateway
- B. Tier-0 (T0) Router
- C. The Default Storage Scale-Out policy storage threshold is set 5% higher than the other Elastic DRS storage policies.
- D. Virtual Private Network
Answer: A
Explanation:
https://blogs.vmware.com/networkvirtualization/2020/09/vmware-transit-connect-simplifying-networking-for-vmc.html/
NEW QUESTION 35
What are two benefits of completing a full data center evacuation to VMware Cloud on AWS? (Choose two.)
- A. Reduce the risk of migrating applications to the cloud by removing the need for application transformation.
- B. Maintain existing investment in skills and toolsets.
- C. Diversify the risk associated with migrating applications to the cloud by automatically deploying workloads to multiple regions.
- D. Provide a seamless way to expand the on-premises software-defined data center (SDDC) into the cloud.
- E. Provide a hybrid cloud management solution.
Answer: A,D
NEW QUESTION 36
An organization has purchased both VMware Cloud on AWS and VMware vRealize Network Insight Cloud. Which additional integrated functionality are they able to utilize?
- A. Creation of VMware HCX mobility groups from VMware vRealize Network Insight Cloud discovered applications
- B. Automatic software-defined data center (SDDC) grouping in VMware Cloud on AWS
- C. Collection of underlying AWS networking information sent to VMware vRealize Network Insight Cloud without additional configuration
- D. Automatic creation of network segment in VMware Cloud on AWS by VMware vRealize Network Insight Cloud
Answer: A
Explanation:
You can export waves of VMware vRealize Network Insight discovered applications to HCX for migration as Mobility Groups. HCX integration with vRealize Network Insight is available through API calls.
NEW QUESTION 37
An administrator deploys a VMware Cloud on AWS environment and configures an IPsec virtual private network (VPN) tunnel to their data center. Hybrid Linked Mode connectivity, however, does NOT appear to be working. Before contacting VMware Support, what could the administrator do to narrow down the possible issue?
- A. Fill in the relevant IP information for the on-premises infrastructure and run the desired troubleshooting connectivity test.
- B. Download and review the Tier-0 (TO) gateway firewall logs.
- C. Configure a packet capture appliance on a local segment within VMware Cloud on AWS to capture and analyze traffic across a specific NSX-T gateway interface.
- D. Configure a packet capture device in the on-premises data center to capture packets from the VMware Cloud on AWS software-defined data center (SDDC) to determine which packets are being dropped.
Answer: A
NEW QUESTION 38
An administrator deploys a virtual machine to its software-defined data center (SDDC) and configures it to perform backups of the other virtual machines in the SDDC. The administrator also creates an AWS Simple Storage Service (S3) bucket in the linked Amazon Virtual Private Cloud (VPC) and is attempting to use the S3 bucket as a repository for their backups. The administrator confirms that the backup software is capable of using AWS S3 storage as a backup repository, and that the AWS S3 bucket is configured to use an endpoint in the linked VPC. What else should the administrator do to ensure connectivity between SDDC virtual machines and the AWS S3 repository in the linked VPC through the Elastic Network Interface?
- A. Ensure Service Access for S3 is enabled in Networking and Security for the SDDC.
- B. Configure Direct Connect to a Public Virtual Interface for access to AWS services.
- C. Configure Direct Connect to a Private Virtual Interface for access to AWS services.
- D. Configure a route-based VPN for the SDDC to the VPC.
Answer: C
NEW QUESTION 39
An architect is designing a solution for a customer that will include VMware Cloud on AWS. The solution will enable the customer to progress with their business objective to migrate all of their VMware vSphere workloads to the cloud and completely exit their physical data center. The following information was provided by key stakeholders as part of the initial design workshop:
The customer already consumes a number of AWS native services as part of their existing application landscape.
The customer currently uses both VMware vRealize Log Insight Cloud and VMware vRealize Operations Cloud to monitor their existing on-premises vSphere solution.
The customer currently has configured Federated Identity Management to enable role based access control to VMware Cloud services using their on-premises Active Directory.
What should the architect recommend to ensure that all the prerequisites for deploying a VMware Cloud on AWS solution are successfully met while minimizing operational complexity?
- A. A new VMware Cloud account must be created to enable access to the VMware Cloud on AWS service.
- B. The existing VMware Cloud account should be used to enable access to the VMware Cloud on AWS service.
- C. The ownership of the existing AWS account should be transferred to VMware so that the VMware Cloud on AWS software-defined data center (SDDC) can be deployed.
- D. A new AWS account must be created to enable dedicated connectivity for VMware Cloud on AWS.
Answer: C
NEW QUESTION 40
Refer to the exhibit.
An administrator completes an assessment of its local data center for potential migration into VMware Cloud on AWS. After reviewing and analyzing the data and taking into account the company's business and IT priorities and budget constraints, connectivity between its on-premises and VMware Cloud on AWS environment will NOT require any high speed low latency connections. All new networks should be added to the software-defined data center (SDDC) routing table automatically when created. Which connection supports these requirements?
- A. Route-based VPN
- B. AWS Direct Connect
- C. Policy-based VPN
- D. Layer 2 VPN (L2VPN)
Answer: C
NEW QUESTION 41
Where would a VMware Cloud on AWS administrator generate an API token?
- A. My Account Section
- B. Developer Center
- C. Identity and Access Management
- D. Organizational Settings
Answer: A
Explanation:
Procedure
Log in to the VMware Cloud Director service console at https://console.cloud.vmware.com.
Click your user name and click My Account.
NEW QUESTION 42
Due to a recent acquisition, an architect is being asked to identify and design a cloud-based solution that will assist in merging several data centers together without incurring undue operational overhead while adhering to a very strict project timeline. The proposed solution must have the capability to be rapidly recovered in the event of a cloud provider outage. After careful consideration, the architect determines that VMware Cloud on AWS would be an appropriate solution, requiring a total of nine hosts for capacity. Which additional configuration options would satisfy the requirements of this project?
- A. * Deploy a VMware Cloud on AWS software-defined data center (SDDC) with a single stand-alone cluster.
* Deploy a second SDDC with a stand-alone cluster into a different AWS region.
* Configure VMware Cloud Disaster Recovery to replicate and protect workloads to the second cluster. - B. * Deploy a VMware Cloud on AWS software-defined data center (SDDC) with a single stretched cluster across two separate regions.
* Configure the cluster to ensure that all virtual machines can be restarted in the second region with a near zero recovery point objective (RPO) in the event of any environment or system failures. - C. * Deploy a VMware Cloud on AWS software-defined data center (SDDC) with a single stretched cluster across two separate availability zones.
* Configure the cluster to ensure that all virtual machines can be restarted in the second availability zone with a near zero recovery point objective (RPO) in the event of any environment or system failures. - D. * Deploy a VMware Cloud on AWS software-defined data center (SDDC) with a single stand-alone cluster.
* Deploy a second stand-alone cluster into the SDDC in a separate region.
* Configure VMware Cloud Disaster Recovery to replicate and protect workloads to the second cluster.
Answer: C
NEW QUESTION 43
When configuring Hybrid Linked Mode from the vCenter Cloud Gateway appliance, which groups are mapped from a customer's on-premises environment to the cloud?
- A. vSphere Groups
- B. Local Groups
- C. LDAP Groups
- D. Active Directory Groups
Answer: D
NEW QUESTION 44
Refer to the exhibit.
How would an administrator accomplish the given configuration leveraging the firewall capabilities within VMware Cloud on AWS?
- A. * Create a gateway firewall rule permitting bi-directional traffic to Subnet A from the Internet.
* Create a gateway firewall rule denying bi-directional traffic to Subnet B and Subnet C from the Internet.
* Create a gateway firewall rule to permit bi-directional traffic from Subnet A to Subnet B and from Subnet B to Subnet C. - B. * Create a gateway firewall rule permitting bi-directional traffic to Subnet A from the Internet.
* Create a gateway firewall rule denying bi-directional traffic to Subnet B and Suubnet C from the Internet.
* Create a distributed firewall rule under the Application category to permit bi-directional traffic from Subnet A to Subnet B and from Subnet B to Subnet C. - C. * Create a gateway firewall rule permitting bi-directional traffic to Subnet A from the Internet.
* Create a distributed firewall rule denying bi-directional traffic to Subnet B and Subnet C from the Internet.
* Create a distributed firewall rule under the Ethernet category to permit bi-directional traffic from Subnet A to Subnet B and from Subnet B to Subnet C.
C * Create a gateway firewall rule permitting bi-directional traffic to Subnet A from the Internet.
* Create a gateway firewall rule denying bi-directional traffic from the Internet to all subnets.
* Create a distributed firewall rule under the Infrastructure category to permit bi-directional traffic from Subnet A to Subnet B and from Subnet B to Subnet C.
Answer: B
NEW QUESTION 45
......
Try Best 5V0-11.21 Exam Questions from Training Expert Prep4sureGuide: https://www.prep4sureguide.com/5V0-11.21-prep4sure-exam-guide.html
Practice Examples and Dumps & Tips for 2021 Latest 5V0-11.21 Valid Tests Dumps: https://drive.google.com/open?id=1haiVneBdxAtMWYWayfEpAGNCRRadySed