Use Real 300-610 - 100% Cover Real Exam Questions [Sep-2021]
Dumps Brief Outline Of The 300-610 Exam - Prep4sureGuide
NEW QUESTION 64
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network. Which two solution must be used to meet these requirements? (Choose two)
- A. Distributed anycast gateway
- B. Inter-site network
- C. VRF-lite
- D. spanning tree protocol
- E. DC interconnect
Answer: A,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-12/configuration_guide/vxlan/b_1612_bgp_evpn_vxlan_9300_cg/configuring_evpn_vxlan_anycast_gateway.html
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html
NEW QUESTION 65
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network device and service. The company servers already have been security-hardened and must not have any additional software installed on team. The security policy mandates the use of a secure communication protocol that support authentication and encryption for managing the servers. Which two automation tools must be used to meet these requirements? (Choose two.)
- A. Ansible
- B. Puppet
- C. Chef
- D. CFEngine
- E. Saltstack
Answer: B,E
NEW QUESTION 66
An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?
- A. Control group
- B. FHRP filter
- C. Data group
- D. ARP filter
Answer: B
Explanation:
Reference:
NEW QUESTION 67
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. in the hardware on the Cisco UCS VIC 12xx adapter or later
- B. on the host, by using multipathing software
- C. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- D. in the hardware on any Cisco UCS VIC adapter
Answer: B
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION 68
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
- A. SAN port channel
- B. E-Trunk
- C. LACP port channel
- D. vPC+
Answer: C
NEW QUESTION 69
What is an advantage of using OTV as compared to VPLS for data center redundancy?
- A. provides full-mesh connectivity
- B. provides head-end replication
- C. uses a proactive MAC advertisement
- D. prevents loops on point-to-point links
Answer: D
Explanation:
Section: Network Design
Explanation/Reference: https://community.cisco.com/t5/data-center-documents/understanding-overlay-transport- virtualization-otv/ta-p/3151502#toc-hId-1043251551
NEW QUESTION 70
Refer to the exhibit.
A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?
- A. Multi-site
- B. Multi-pod over OSPF EVPN
- C. Multi-pod over MP-BGP EVPN
- D. Multi-cloud
Answer: A
Explanation:
Each data center has its own APIC cluster. This is multi-site setup.
NEW QUESTION 71
Refer to the exhibit.
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Each uplink that connects an IOM is configured as a discrete link.
- B. Cisco UCS Manager creates a single fabric port channel.
- C. The port channel is disabled until an administrator enables it manually.
- D. Cisco UCS Manager creates two separate fabric port channels.
Answer: D
NEW QUESTION 72
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network. Which two solution must be used to meet these requirements? (Choose two)
- A. Distributed anycast gateway
- B. Inter-site network
- C. VRF-lite
- D. spanning tree protocol
- E. DC interconnect
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html
NEW QUESTION 73
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2240 bytes
- B. 9000 bytes
- C. 2158 bytes
- D. 2000 bytes
Answer: D
NEW QUESTION 74
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. VSS that has unified uplinks
- B. Ethernet and unified ports on the same port channel
- C. cross-connections with pinning
- D. vPC that has unified uplinks
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION 75
A customer must install a new Hyperflex Stretched cluster in two sites. Low latency and predictable high performance are the top priorities for this setup due to the extensive usage of data-intensive applications across the cluster. Which HyperFlex storage solution is recommended to meet these requirements?
- A. All-HDD
- B. All-SAN
- C. Hybrid
- D. All-Flash
Answer: D
NEW QUESTION 76
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Erase the configuration of both fabric interconnects.
- B. Run the disable fips-mode command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Run the connect local-management command on each fabric interconnect.
Answer: C
Explanation:
Section: Compute Design
NEW QUESTION 77
An engineer manages hundreds of Cisco Nexus 3000 Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive library support, and is object-oriented.
Which automation tool should be used to meet these requirements?
- A. YAML
- B. Perl
- C. Python
- D. Bash
Answer: C
Explanation:
D18912E1457D5D1DDCBD40AB3BF70D5D
NEW QUESTION 78
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 79
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION 80
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?
- A. Ansible
- B. Saltstack
- C. NSO
- D. Puppet
Answer: A
NEW QUESTION 81
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have access to its own VRF instance.
Which interface should be used to meet these requirements?
- A. management interface
- B. interface VLAN
- C. physical interface
- D. loopback interface
Answer: A
NEW QUESTION 82
An engineer is designing a Cisco 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers. Which design approach should be used to accomplish this goal?
- A. vPC localized to Its own data center
- B. FHRP localized to its own data center
- C. STP localized to Its own data center
- D. CFS localized to Its own data center
Answer: B
NEW QUESTION 83
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 84
An engineer must use OTV for Layer 2 connectivity between data centers to support virtual machine mobility between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team reports high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a local DC exit point.
Which feature must be used to meet these requirements?
- A. control group
- B. ARP filter
- C. data group
- D. FHRP filter
Answer: A
NEW QUESTION 85
DRAG DROP
Drag and drop the technologies from the left onto the correct descriptions on the right.
Select and Place:
Answer:
Explanation:
Section: Storage Network Design
NEW QUESTION 86
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for external connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network.
Which two solutions must be used to meet these requirements? (Choose two.)
- A. Spanning Tree Protocol
- B. VRF-Lite
- C. Inter-Site Network
- D. DC Interconnect
- E. Distributed Anycast Gateway
Answer: D,E
NEW QUESTION 87
A network architect designs a high-availability architecture for the Cisco UCS Fabric Interconnects that are installed in a data center. The architecture must support clustering and redundancy.
Which architecture meets these requirements?
- A. dual connections from port L1 to L1 and one connection from port L1 to L1 with twinax cables
- B. dual connections from port L1 to L2 and one connection from port L2 to L1 with Ethernet cables
- C. dual connections from port L1 to L2 and one connection from port L2 to L1 with twinax cables
- D. dual connections from port L1 to L1 and one connection from port L2 to L2 with Ethernet cables
Answer: D
Explanation:
Reference:
ch10lvl1sec92/configuring-high-availability-clustering
NEW QUESTION 88
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 89
......
Certification Training for 300-610 Exam Dumps Test Engine: https://www.prep4sureguide.com/300-610-prep4sure-exam-guide.html
300-610 Training & Certification Get Latest CCNP Data Center : https://drive.google.com/open?id=1lE13tVud_-02Je3CFuwYmNm9VA8hZOfm