Real Exam Questions HPE0-S22 Dumps Exam Questions in here [Oct-2021]
Get Latest Oct-2021 Conduct effective penetration tests using HPE0-S22
NEW QUESTION 56
A customer needs a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges. The populated chassis provide the following in total:
135 processors with 4 2.9GHz cares each
4. 32TB RAM
64.8TB local storage on SSDs
Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one- tenth or even one-hundredth of its potential?
- A. amount of RAM
- B. number of cores per processor
- C. amount of local storage on SSDs
- D. number of processors
Answer: C
NEW QUESTION 57
How does the HPE c7000 BladeSystems use of network infrastructure compare with the
HPE Apollo 6000's?
- A. The HPE c7000 BladeSystem offers greater port consolidation.
- B. The HPE Apollo 6000 uses fewer network ports per server.
- C. The HPE Apollo 6000 offers greater per server connectivity.
- D. The HPE c7000 BladeSystem offers less port variety.
Answer: D
NEW QUESTION 58
A customer has an Ethernet-based storage solution. The customer needs to upgrade its servers to prepare for expanding storage. The customer has spent a lot of money to update its Ethernet infrastructure, so does not want to change it.
The customer has DAS and NAS-based storage and plans to implement a Fibre Channel SAN-based storage array within the next six to eight months.
Which server-based solution meets the customer's future needs?
- A. HPE DL360 solution with fibre-based HBAs
- B. HPE Moonshot solutions
- C. HPE BL460c solution with Converged Networks Adapters
- D. HPE Apollo 8000 solutions
Answer: C
NEW QUESTION 59
A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform.
What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?
- A. how to use SCCM to provide a graphical installation method for new nodes
- B. how to add an mRCA module to provide a graphical installation method for new nodes
- C. how to use iLO remote console to provide a graphical installation method for new nodes
- D. how to use VSP to provide a graphical installation method for new nodes
Answer: B
Explanation:
Explanation/Reference:
Explanation
In order to interface with the specific server cartridge node, the mRCA must be installed in a specific slot within the chassis, relative to the linking server cartridge.
Reference https://h20565.www2.hpe.com/hpsc/doc/public/display?
sp4ts.oid=5365577&docLocale=en_US&docId=emr_na-c04785597
NEW QUESTION 60
Which discussion point describes a Tier I approach to datacenter redundancy levels?
- A. using a single path for power and cooling distribution without redundant components
- B. optimizing DIMM memory and RAID protected storage
- C. implementing primarily a storage redundancy technique
- D. composing the solution of basic hypervisor clustering technology
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 61
An architect is planning an HPE Integrity Superdome X solution with the following nPartitions:
nPar 1= Slots 1, 3, and 5
nPar 2 = Slots 2, 4, and 6
The Superdome X solution must connect to a Fibre Channel SAN solution, which provides boot disks for the Superdome X solution.
The architect has selected a FlexibleLOM adapter for each blade.
What is a valid plan for additional adapters?
- A. one 2-port FC HBA each for slot 2, slot 4, and slot 6
- B. one 2-port FC HBA each for slot 1, slot 3, and slot 5
- C. one 2-port FC HBA for slot 1
- D. one 2-port FC HBA each for slot 1 and slot 2
Answer: A
NEW QUESTION 62
An architect is designing an HPE Apollo 6000 solution to support an HPC application that is highly parallel and involves a lot of communication between compute nodes. The architect is choosing the FlexibleLOM options for the compute trays.
Which technology should the architect ensure that the trays support?
- A. VXLAN offloading
- B. Fibre Channel over Ethernet (FCoE)
- C. RDMA over Converged Ethernet (RoCE)
- D. iSCSI hardware imitator
Answer: D
NEW QUESTION 63
View the Exhibit.
Refer to the exhibit. A customer has an HPE c7000 enclosure managed by HPE OneView with HP BL460c Gen9 servers in a vSphere cluster. The customer has multiple vLANs trunked from the top of rack (TOR) switches to the Virtual Connect modules in the enclosure. Due to network Access Control List (ACL) requirement and guidelines from the networking department, all network traffic should be forced to an upstream switch using the Virtual Connect "Private Network" feature.
The customer reports slow network response.
Which modification can the architect recommend to improve network performance?
- A. Change the FlexFabric adapter modules with Flex-10 adapter modules.
- B. Put the vMotion network in a separate uplink set and disable "Private Network".
- C. Remove the Management network from the uplinks.
- D. Change the FlexFabric 20/40 adapter modules with Flex 10/100 modules.
Answer: B
NEW QUESTION 64
A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs.
Which HPE Server solution will help meet the customer's needs?
- A. HPE Superdome X
- B. HPE BladeSystem c7000 with BL460G Gen9 Servers
- C. HPE Apollo 6000 System
- D. HPE Apollo 4500 System
Answer: A
Explanation:
Explanation/Reference:
Reference https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA6-5294ENN.pdf (page 5)
NEW QUESTION 65
A customer needs to streamline monitoring to its HPE Apollo 6000 solution.
Which benefit can HPE Advanced Power Management (APM) provide to this customer?
- A. It audits the firmware on XL servers installed in the HPE Apollo chassis.
- B. It monitors the utilization of resources such as CPU and memory.
- C. It enables HPE OneView to automatically discover and map the chassis and its servers.
- D. It discovers and inventories XL servers installed in the HPE Apollo chassis.
Answer: D
NEW QUESTION 66
Which discussion point describes a Tier I approach to datacenter redundancy levels?
- A. using a single path for power and cooling distribution without redundant components
- B. optimizing DIMM memory and RAID protected storage
- C. implementing primarily a storage redundancy technique
- D. composing the solution of basic hypervisor clustering technology
Answer: D
NEW QUESTION 67
View the Exhibit.
Refer to the exhibit. A customer has an HPE c7000 enclosure managed by HPE OneView with HP BL460c Gen9 servers in a vSphere cluster. The customer has multiple vLANs trunked from the top of rack (TOR) switches to the Virtual Connect modules in the enclosure. Due to network Access Control List (ACL) requirement and guidelines from the networking department, all network traffic should be forced to an upstream switch using the Virtual Connect "Private Network" feature.
The customer reports slow network response.
Which modification can the architect recommend to improve network performance?
- A. Change the FlexFabric adapter modules with Flex-10 adapter modules.
- B. Remove the Management network from the uplinks.
- C. Put the vMotion network in a separate uplink set and disable "Private Network".
- D. Change the FlexFabric 20/40 adapter modules with Flex 10/100 modules.
Answer: D
NEW QUESTION 68
An architect proposes an HPE Moonshot 1500 chassis with m710p cartridges, an HPE Moonshot 45XGc Switch, and an HPE 4-QSFP+ Uplink Module. The customer informs the architect that each cartridge requires a redundant 10GbE link.
How should the architect change the proposal?
- A. Change the 4-QSFP+ Uplink Module to a 16-SFP+ Uplink Module.
- B. Add another FlexibleLOM adapter for each cartridge.
- C. Add another HPE Moonshot 45XGc Switch and 4-QSFP+ Uplink Module.
- D. Change the HPE Moonshot 45XGc Switch to an HPE Moonshot 180G switch.
Answer: C
NEW QUESTION 69
An architect is proposing an HPE Moonshot System, including m710 cartridges, an iLO Chassis Manager, switch, and uplink modules. The customer needs IT staff to be able to access cartridges over a Remote console.
What should the architect explain to the customer?
- A. Remote Console access is only supported when a cartridge is part of an HPE Helion CloudSystem 9.x solution.
- B. IT staff can open a Remote Console to any cartridge linked to an mRCA through the iLO CM.
- C. IT staff can open a Remote Console to any cartridge through the iLO CM.
- D. Remote Console access is not supported for cartridges; IT staff should use local consoles instead.
Answer: B
Explanation:
Explanation
NEW QUESTION 70
DRAG DROP
Select all that apply.
Click and drag the Network Interface on the left to match it with its HPE Server Family on the right.
Select and Place:
Answer:
Explanation:
Explanation/Reference:
NEW QUESTION 71
A customer needs to streamline monitoring to its HPE Apollo 6000 solution.
Which benefit can HPE Advanced Power Management (APM) provide to this customer?
- A. It audits the firmware on XL servers installed in the HPE Apollo chassis.
- B. It monitors the utilization of resources such as CPU and memory.
- C. It enables HPE OneView to automatically discover and map the chassis and its servers.
- D. It discovers and inventories XL servers installed in the HPE Apollo chassis.
Answer: D
NEW QUESTION 72
......
Authentic Best resources for HPE0-S22 Online Practice Exam: https://www.prep4sureguide.com/HPE0-S22-prep4sure-exam-guide.html