2024 Valid HPE6-A73 Dumps for Helping Passing HP Exam!
Download Free HP HPE6-A73 Exam Questions & Answer
NEW QUESTION # 22
What is correct regarding policy-based routing?
- A. Policy actions include routing permitting or dropping traffic.
- B. Policies can only be applied to routed interfaces.
- C. Monitoring of policy interfaces occurs every 60 seconds.
- D. Policies can be applied inbound and outbound.
Answer: D
NEW QUESTION # 23
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 5 seconds
- B. Once every 1 second
- C. Once every 60 seconds
- D. Once every 30 seconds
Answer: A
NEW QUESTION # 24
Examine the AOS-CS switch output:
Based on this output, what is correct?
- A. 802.1X authentication occurred and downloadable user roles are deployed
- B. A local user role was deployed using a ClearPass solution
- C. 802.1X authentication was successful, but MAC authentication is yet to start
- D. Only 802.1X authentication is configured on the port
Answer: A
NEW QUESTION # 25
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any group web-servers group web-ports
- B. access-list ip server 10 permit tcp any web-servers group web-ports
- C. access-list ip server 10 permit tcp any web-servers web-ports
- D. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
Answer: C
NEW QUESTION # 26
A company has just purchased AOS-CX switches The company has a free and open-source AAA solution The company wants to implement access control on the Ethernet ports of the AOS-CX switches.
Which security features can the company implement given the equipment that they are using?
- A. Local user roles
- B. Port-based tunneling
- C. Downloadable user roles
- D. Device fingerprinting
Answer: A
NEW QUESTION # 27
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the gateways?
- A. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- B. Implement local user roles with a gateway role defined on the AOS-CX switches
- C. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
- D. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
Answer: B
NEW QUESTION # 28
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. No downloadable user role exists
- B. The RADIUS request timed out to the AAA server
- C. The port should be configured for 802.1X
- D. MAC authentication has passed, but 802.1X authentication is in progress
Answer: A
Explanation:
User role "Authenticated" was passed down but does not exist
NEW QUESTION # 29
What would prevent two OSPF routers from forming an adjacency? (Select two.)
- A. Different priorities
- B. Different area types
- C. Different router IDs
- D. Different IP addresses
- E. Different MTU sizes
Answer: B,E
NEW QUESTION # 30
A network has an ABR that connects area 0 and 1. A network engineer configures a summarized route for area 0. The ABR is a designated router (DR) for the segment it uses to connect to area 1.
Which LSA type is assigned to this route when the summarized route is advertised into area 1 by the ABR?
- A. LSA1
- B. LSA4
- C. LSA3
- D. LSA2
Answer: B
NEW QUESTION # 31
An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities The campus involves a core as well as multiple access layers Which feature should the administrator implement to allow both VSX'Capable core switches to process traffic sent to the default gateway in the campus VLANs?
- A. VRRP
- B. IP helper
- C. VRF
- D. Active gateway
Answer: D
NEW QUESTION # 32
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
- A. Define the account to implement downloadable user roles
- B. Define the account to implement change of authorization
- C. Speed up the AAA authentication process
- D. Implement replay protection for AAA messages
Answer: C
Explanation:
Radius service tracking locates the availability of the RADIUS service configured on the switch. It helps to minimize the waiting period for new clients in the unauth-vid (Guest Vlan) when authentication fails because of service is not available, as well as previously authenticated clients in unauth-vid (Guest Vlan) when re-authentication fails because service is not available during the re-authentication period. Note that this feature is disabled by default.
https://techhub.hpe.com/eginfolib/networking/docs/switches/WB/16-02/5200-1650_WB_ASG/content/ch04s04.html
NEW QUESTION # 33
A company uses NetEdit to manage a network of 700 AOS-CX switches and approximately 1,000 other SNMP-capable devices.
Which management solution should the company use to monitor all the devices, as well as see a topology picture of how all the devices are connected together?
- A. Network Analysis Engine (NAE)
- B. NetEdit
- C. Aruba Activate
- D. Aruba AirWave
Answer: B
NEW QUESTION # 34
Examine the network topology.
Company XYZ has two connections to a service provider (ISP1). Here is the configuration of Router1:
Here is the configuration of Router2:
Based on configuration of Router1 and Router2, which BGP metric is being manipulated?
- A. Multiple exit discriminator
- B. AS path length
- C. Local preference
- D. Weight
Answer: A
NEW QUESTION # 35
Examine the AOS-CX switch output:
Based on this output, what is correct?
- A. Only 802 1X authentication is configured on the port
- B. A local user role was deployed using a ClearPass solution
- C. 802 1X authentication occurred and downloadable user rotes are deployed
- D. 802.1X authentication was successful, but MAC authentication is yet to start
Answer: C
NEW QUESTION # 36
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 1 to Client 3
- B. Client 1 to Client 2
- C. Client 3 to Client 2
- D. Server 2 to Client 2
- E. Server 1 to Client 1
Answer: B,E
NEW QUESTION # 37
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Limits can be defined only for broadcast and multicast traffic
- B. Only a traffic rate and burst size can be defined for a queue
- C. Rate limiting and egress queue shaping can be applied globally
- D. Rate limiting and egress queue shaping can be used to restrict inbound traffic
Answer: A
NEW QUESTION # 38
An administrator has an AOS-CX switch configured with:
Based on the above configuration, how many OSPF routes will routing switches see in Area 1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 39
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Area 0 has 13 routes
- B. Area 1 has 23 routes
- C. Core1 has received one LSA Type 5 from the ASBR
- D. Core1 has no OSPF routes
Answer: B
NEW QUESTION # 40
A network administrator is implementing BGP for a larger network. The network has over 20 exit points across 15 different BGP routers. The administrator does not want to implement a fully-meshed iBGP peering between all BGP routers.
Which feature should the administrator implement to reduce the number of peers the administrator needs to define?
- A. BFD
- B. Route reflectors
- C. Peer-Groups
- D. Next-hop-self
Answer: C
NEW QUESTION # 41
......
HPE6-A73 Exam Dumps For Certification Exam Preparation: https://www.prep4sureguide.com/HPE6-A73-prep4sure-exam-guide.html
Online VALID HPE6-A73 Exam Dumps File Instantly: https://drive.google.com/open?id=1fCgeYfEdyp8054wIX3HTRFn16U2IYHO4