NSE7_OTS-6.4 Exam Dumps Pass with Updated Mar-2022 Tests Dumps
NSE7_OTS-6.4 exam questions for practice in 2022 Updated 36 Questions
Fortinet NSE7_OTS-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 20
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. Overview
- B. Security
- C. List
- D. Risk
- E. IPS
Answer: A,C,D
NEW QUESTION 21
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. Port5 is not a member of the software switch.
- B. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- C. The FortiGate-Edge device must be in NAT mode.
- D. The FortiGate devices is in offline IDS mode.
Answer: C,D
NEW QUESTION 22
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiNAC
- B. FortiEDR
- C. FortiSwitch
- D. FortiGate
Answer: A
NEW QUESTION 23
Refer to the exhibit.
You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- B. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- C. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
Answer: A
NEW QUESTION 24
Which three common breach points can be found in a typical OT environment? (Choose three.)
- A. Global hat
- B. RTU exploits
- C. Black hat
- D. VLAN exploits
- E. Hard hat
Answer: B,C,D
NEW QUESTION 25
Refer to the exhibit.
Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)
- A. FortiNAC for network access control
- B. FortiEDR for endpoint detection
- C. FortiGate for application control and IPS
- D. FortiGate for SD-WAN
- E. FortiSIEM for security incident and event management
Answer: A,C,E
NEW QUESTION 26
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiSIEM analytics report
- B. A FortiAnalyzer device report
- C. A FortiSIEM CMDB report
- D. A FortiSIEM incident report
Answer: C
NEW QUESTION 27
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. Rogue devices, each time they connect
- B. Known trusted devices, each time they change location
- C. All connected devices, each time they connect
- D. Rogue devices, only when they connect for the first time
Answer: D
NEW QUESTION 28
As an OT administrator, it is important to understand how industrial protocols work in an OT network.
Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
- B. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
- C. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
- D. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
Answer: C
NEW QUESTION 29
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Enhanced point of connection details
- B. Adapter consolidation for multi-adapter hosts
- C. Direct VLAN assignment
- D. Importation and classification of hosts
Answer: A,C
NEW QUESTION 30
An OT administrator deployed many devices to secure the OT network. However, the SOC team is reporting that there are too many alerts, and that many of the alerts are false positive. The OT administrator would like to find a solution that eliminates repetitive tasks, improves efficiency, saves time, and saves resources.
Which products should the administrator deploy to address these issues and automate most of the manual tasks done by the SOC team?
- A. FortiSIEM and FortiManager
- B. A syslog server and FortiSIEM
- C. FortiSandbox and FortiSIEM
- D. FortiSOAR and FortiSIEM
Answer: D
NEW QUESTION 31
An OT supervisor needs to protect their network by implementing security with an industrial signature database on the FortiGate device.
Which statement about the industrial signature database on FortiGate is true?
- A. An administrator must create their own database using custom signatures.
- B. A supervisor can enable it through the FortiGate CLI.
- C. A supervisor must purchase an industrial signature database and import it to the FortiGate.
- D. By default, the industrial database is enabled.
Answer: B
NEW QUESTION 32
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must register the same FortiToken on more than one FortiGate.
- B. You must use the user self-registration server.
- C. You must use a FortiAuthenticator.
- D. You must use a third-party RADIUS OTP server.
Answer: C
NEW QUESTION 33
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong time period for the report.
- B. The administrator selected the wrong hcache table for the report.
- C. The administrator selected the wrong devices in the Devices section.
- D. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
Answer: A,B
NEW QUESTION 34
......
Authentic NSE7_OTS-6.4 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.prep4sureguide.com/NSE7_OTS-6.4-prep4sure-exam-guide.html
Updated Premium NSE7_OTS-6.4 Exam Engine pdf: https://drive.google.com/open?id=1JNTBTBYPya41SLrOOSkmmcclN5175_EL