NSE5_FAZ-7.2 Premium Exam Engine - Download Free PDF Questions
Instant Download NSE5_FAZ-7.2 Free Updated Test Dumps
Fortinet NSE5_FAZ-7.2 Exam is ideal for IT professionals who work with Fortinet security devices and want to enhance their skills in log management and analysis. NSE5_FAZ-7.2 exam covers a wide range of topics, including FortiAnalyzer deployment, configuration, and management. Candidates will also learn how to use FortiAnalyzer to generate reports, alerts, and dashboards, and how to troubleshoot common issues.
NEW QUESTION # 18
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is functioning normally
- B. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- C. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
- D. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
Answer: B
Explanation:
Reference:
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
NEW QUESTION # 19
What FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. miglogd
- B. oftpd
- C. logfiled
- D. sqlplugind
Answer: A
NEW QUESTION # 20
How are logs forwarded when FortiAnalyzer is using aggregation mode?
- A. Logs and content files are stored and uploaded at a scheduled time.
- B. Logs are forwarded as they are received.
- C. Logs and content files are forwarded as they are received.
- D. Logs are forwarded as they are received and content files are uploaded at a scheduled time.
Answer: A
Explanation:
https://www.fortinetguru.com/2020/07/log-forwarding-fortianalyzer-fortios-6-2-3/
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/420493/modes
NEW QUESTION # 21
A playbook contains five tasks in total. An administrator runs the playbook and four out of five tasks finish successfully, but one task fails. What will be the status of the playbook after it is run?
- A. Running
- B. Failed
- C. Upstream_failed
- D. Success
Answer: B
NEW QUESTION # 22
Which two statements are true regarding ADOM modes? (Choose two.)
- A. In an advanced mode ADOM. you can assign FortiGate VDOMs from a single FortiGate device to multiple FortiAnalyzer ADOMs.
- B. Normal mode is the default ADOM mode.
- C. You can only change ADOM modes through CLI.
- D. In normal mode, the disk quota of the ADOM is fixed and cannot be modified, but in advance mode, the disk quota of the ADOM is flexible because new devices are added to the ADOM.
Answer: A,B
NEW QUESTION # 23
In order for FortiAnalyzer to collect logs from a FortiGate device, what configuration is required? (Choose two.)
- A. FortiGate must be registered with FortiAnalyzer
- B. Log encryption must be enabled
- C. ADOMs must be enabled
- D. Remote logging must be enabled on FortiGate
Answer: A,D
Explanation:
Pg 70: "after you add and register a FortiGate device with the FortiAnalyzer unit, you must also ensure that the FortiGate device is configured to send logs to the FortiAnalyzer unit."
https://docs.fortinet.com/uploaded/files/4614/FortiAnalyzer-5.4.6-Administration%20Guide.pdf Pg 45: "ADOMs must be enabled to support the logging and reporting of NON-FORTIGATE devices, such as FortiCarrier, FortiClientEMS, FortiMail, FortiWeb, FortiCache, and FortiSandbox."
NEW QUESTION # 24
Refer to the exhibits.
How many events will be added to the incident created after running this playbook?
- A. Thirteen events will be added.
- B. Ten events will be added.
- C. Five events will be added.
- D. No events will be added.
Answer: B
NEW QUESTION # 25
Which two statements about log forwarding are true? (Choose two.)
- A. Logs are forwarded in real-time only.
- B. You can use aggregation mode only with another FortiAnalyzer.
- C. The client retains a local copy of the logs after forwarding.
- D. Forwarded logs cannot be filtered to match specific criteria.
Answer: B,C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/420493/modes
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/621804/log-forwarding
NEW QUESTION # 26
If you upgrade your FortiAnalyzer firmware, what report elements can be affected?
- A. Custom datasets
- B. Output profiles
- C. Report scheduling
- D. Report settings
Answer: A
NEW QUESTION # 27
What purposes does the auto-cache setting on reports serve? (Choose two.)
- A. To automatically update the hcache when new logs arrive
- B. To provide diagnostics on report generation time
- C. To reduce report generation time
- D. To reduce the log insert lag rate
Answer: A,C
NEW QUESTION # 28
Which two statements are correct regarding the export and import of playbooks? (Choose two.)
- A. A playbook that was disabled when it was exported, will be disabled when it is imported.
- B. You can export only one playbook at a time.
- C. You can import a playbook even if there is another one with the same name in the destination.
- D. Playbooks can be exported and imported only within the same FortiAnaryzer.
Answer: A,C
Explanation:
If the imported playbook has the same name as an existing one, FortiAnalyzer will create a new name that includes a timestamp to avoid conflicts.
Playbooks are imported with the same status they had (enabled or disabled) when they were exported.
Playbooks set to run automatically should be exported while they are disabled to avoid unintended runs on the destination.
NEW QUESTION # 29
Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy. What is the most likely problem?
- A. CPU resources are too high.
- B. Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.
- C. The total disk space is insufficient and you need to add other disk.
- D. The ADOM disk quota is set too low based on log rates.
Answer: D
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-1/FMG FAZ/1100_Storage/0017_Deleted%20device%20logs.htm
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/87802/automatic-deletion
NEW QUESTION # 30
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?
- A. Log correlation
- B. Log collection
- C. Real-time forwarding
- D. Host name resolution
Answer: A
NEW QUESTION # 31
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. The security risk was blocked or dropped.
- B. The risk source is isolated.
- C. The security event risk is considered open.
- D. An incident was created from this event.
Answer: A
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 206
NEW QUESTION # 32
Which statement is true regarding Macros on FortiAnalyzer?
- A. Macros are supported only on the FortiGate ADOM.
- B. Macros are useful in generating excel log files automatically based on the reports settings.
- C. Macros are ADOM specific and each ADOM will have unique macros relevant to that ADOM.
- D. Macros are predefined templates for reports and cannot be customized.
Answer: C
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 283: Note that macros are ADOM-specific and supported in FortiGate and FortiCarrier ADOMs only.
NEW QUESTION # 33
View the exhibit.
What does the data point at 14:35 tell you?
- A. FortiAnalyzer is dropping logs.
- B. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
- C. The sqlplugind daemon is ahead in indexing by one log.
- D. FortiAnalyzer is indexing logs faster than logs are being received.
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/47690/insert-rate-vs-receive-rate-widget
NEW QUESTION # 34
In FortiAnalyzer's FormView, source and destination IP addresses from FortiGate devices are not resolving to a hostname. How can you resolve the source and destination IPs, without introducing any additional performance impact to FortiAnalyzer?
- A. Resolve IPs on FortiGate
- B. Configure local DNS servers on FortiAnalyzer
- C. Configure # set resolve-ip enable in the system FortiView settings
- D. Resolve IPs on a per-ADOM basis to reduce delay on FortiView while IPs resolve
Answer: A
NEW QUESTION # 35
Which daemon is responsible for enforcing raw log file size?
- A. oftpd
- B. logfiled
- C. miglogd
- D. sqlplugind
Answer: B
NEW QUESTION # 36
......
Fortinet NSE5_FAZ-7.2 is an exam designed for professionals who want to validate their skills and knowledge in using Fortinet FortiAnalyzer 7.2. Fortinet NSE 5 - FortiAnalyzer 7.2 Analyst certification is intended for analysts who are responsible for monitoring and analyzing network traffic, generating reports, and making decisions based on the data collected by FortiAnalyzer. NSE5_FAZ-7.2 exam measures the knowledge of candidates in deploying, configuring, and managing FortiAnalyzer 7.2 in a network environment.
Free NSE5_FAZ-7.2 Exam Braindumps Fortinet Pratice Exam: https://www.prep4sureguide.com/NSE5_FAZ-7.2-prep4sure-exam-guide.html
Valid NSE5_FAZ-7.2 FREE EXAM DUMPS QUESTIONS & ANSWERS: https://drive.google.com/open?id=11x3D0e2lTJcmeDcrk7mHuujhHbp1_5zH