NS0-184 PDF Dumps Real 2022 Recently Updated Questions
Released Network Appliance NS0-184 Updated Questions PDF
A quick overview of the difficulties you can face, while writing the Network Appliance NS0-184 Certification Exam
Although the Network Appliance NS0-184 Certification Exam is the most preferred certification in the market, there are certain difficulties that a candidate can face while taking the NS0-184 Exam. Some of the difficulties that you can face while writing the NS0-184 Exam are given here. Simplified time management is one of the most important difficulties that you can face while writing the Network Appliance NS0-184 Certification Exam. You can easily find yourself in a situation where you have to deal with multiple tasks and time constraints, as the pass rate is not high. The NS0-184 Exam is quite time-consuming, and you need to be well-prepared to deal with such situations. You should have enough time to prepare for the Network Appliance NS0-184 Certification Exam. NS0-184 Dumps will help you to deal with the difficulties and manage your time efficiently.
Another difficulty that you can face while writing the Network Appliance NS0-184 Certification Exam is related to the Network Appliance NS0-184 Certification Exam content. To demonstrate the quality of your expertise, you need to know the details of the NS0-184 Certification Exam content. Most of the candidates are not aware of the syllabus and resources that are used for the preparation of the Network Appliance NS0-184 Certification Exam. As a result, you will not be able to prepare yourself adequately for the Network Appliance NS0-184 Certification Exam. Connectivity options are also one of the most important difficulties that you can face while writing the Network Appliance NS0-184 Certification Exam.
NEW QUESTION 27
You have installed a new 2-node FAS9000 cluster with two external shelves. You want to make sure that each node has two paths to each disk in the shelves.
How do you verify your configuration?
- A. Use the storage disk option show command.
- B. Use the disk show -fields initiator command.
- C. Use the sysconfig command.
- D. Use the storage show disk -p command.
Answer: B
NEW QUESTION 28
Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.
In this scenario, which three resources would you use to find this information? (Choose three.)
- A. Interoperability Matrix Tool (IMT)
- B. hardware installation setup poster
- C. AFF FAS Documentation Center
- D. Hardware Universe (HWU)
- E. Active IQ Unified Manager
Answer: B,C,D
NEW QUESTION 29
You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface groups for higher performance and resiliency.
Which two NetApp best practices should you follow to satisfy these performance and resiliency requirements? (Choose two.)
- A. Use ports from different NICs.
- B. Use ports from the same NICs.
- C. Use ports with the same chipsets.
- D. Use ports with different chipsets.
Answer: A,C
NEW QUESTION 30
A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?
- A. ONTAP System Manager
- B. Interoperability Matrix Tool
- C. Active IQ Unified Manager
- D. Active IQ OneCollect
Answer: A
NEW QUESTION 31
Click the Exhibit button.
After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.
Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)
- A. Open https://support.netapp.com, using the partner credentials.
- B. Open My Cases, and select the 41747189 case number.
- C. Open My Cases, and select Create a Case.
- D. Open https://support.netapp.com, using the customer credentials.
Answer: B,D
NEW QUESTION 32
A customer requires encryption at rest on every node root volume.
In this scenario, which two encryption solutions will fulfill this requirement? (Choose two.)
- A. IPsec
- B. NSE
- C. NVE
- D. NAE
Answer: C,D
NEW QUESTION 33
You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.
In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)
- A. master
- B. term-based
- C. base
- D. perpetual
Answer: B,D
NEW QUESTION 34
In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 35
Click the Exhibit button.
Immediately after installing a 4-node FAS8200 cluster, you discover that node, "cluster1-02", must be removed from the cluster. You want to use the cluster remove-node command to remove the node.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.
- B. Move Epsilon to cluster1-02, then remove the node.
- C. Remove the node, then the cluster will elect a new master to remain in quorum.
- D. Verify that high availability is configured for failover to the HA partner, then remove the node.
Answer: B,D
NEW QUESTION 36
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- B. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
- C. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
- D. Enable ALUA between the two HA pairs to allow cluster backend traffic.
Answer: A
NEW QUESTION 37
What is the default shelf ID for disk shelves with IOM12 modules?
- A. 0
- B. 1
- C. 00
- D. 01
Answer: C
NEW QUESTION 38
Your customer currently has a 4-node AFF A400 cluster that runs ONTAP 9.8, with two NS224 shelves that are connected to each HA pair. The customer needs to add additional capacity to the cluster.
Which two actions would enable the customer to accomplish this task? (Choose two.)
- A. Connect the new NS224 shelves to the existing NS224 shelves and adjust the shelf IDs.
- B. Connect the new NS224 shelves to the existing Cisco Nexus 3232C switches.
- C. Deploy a new AFF A400 to the cluster.
- D. Deploy new, dedicated, storage switches for the new NS224 shelves.
Answer: A,C
NEW QUESTION 39
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view telemetry dat
a. The customer also wants to receive online information about any risks with the cluster and potential best-practice gaps.
Which tool satisfies the customer's requirements?
- A. Spot by NetApp
- B. Active IQ Digital Advisor
- C. Cloud Manager
- D. Interoperability Matrix Tool
Answer: B
NEW QUESTION 40
Which logical interface has a fixed firewall policy?
- A. intercluster LIF
- B. cluster management LIF
- C. cluster LIF
- D. data LIF
Answer: C
NEW QUESTION 41
Click the Exhibit button.
Which set of components on a FAS9000 are highlighted in the exhibit?
- A. FCVI-Module, Controller, Serial-Port, FlashCache-Module
- B. Powersupply, Controller, USB-Port, NVRAM-Module
- C. SAS-Module, Controller, USB-Port, FlashCache-Module
- D. NVRAM-Module, Controller, Serial-Port, FlashCache-Module
Answer: A
NEW QUESTION 42
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure cluster LIFs.
- B. Configure a remote tier.
- C. Configure protocols.
- D. Configure aggregates.
Answer: D
NEW QUESTION 43
When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?
- A. RAID 4
- B. RAID 0
- C. RAID DP
- D. RAID-TEC
Answer: C
NEW QUESTION 44
You are deploying a new AFF All SAN Array A250 into a customer's existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration? (Choose two.)
- A. Active IQ
- B. Brocade SAN Health
- C. Cisco Data Center Network Manager (DCNM)
- D. Active IQ Config Advisor
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modular-system/flex-pod-datacenter-ucs-intersight.html
NEW QUESTION 45
......
Here are the topics of the Network Appliance NS0-184 Certification Exam
NS0-184 Dumps cover the following topics of the Network Appliance NS0-184 Certification Exam
ONTAP Concepts
Basic Installation Topics and Tools
Customer Handoff
Network Appliance NS0-184 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NS0-184 Dumps and Practice Test (60 Exam Questions): https://www.prep4sureguide.com/NS0-184-prep4sure-exam-guide.html
Guide (New 2022) Actual Network Appliance NS0-184 Exam Questions: https://drive.google.com/open?id=1E0_K7qC2QZ6nfzwb5UyB_E5StiHc-O1-