Network Appliance NS0-592 Dumps - 100% Cover Real Exam Questions (Updated 67 Questions)
Real NS0-592 dumps - Real Network Appliance dumps PDF
NetApp NS0-592 Exam Certification Details:
| Duration | 120 minutes |
| Exam Price | $150 USD |
| Exam Name | Support Engineer ONTAP Specialist |
| Sample Questions | NetApp NS0-592 Sample Questions |
| Number of Questions | 60 |
| Exam Code | NS0-592 NCSE ONTAP |
| Passing Score | 62% |
| Exam Registration | PEARSON VUE |
| Recommended Training | ONTAP Troubleshooting (ILT) |
Network Appliance NS0-592 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 25
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)
- A. stats volume
- B. lun stats -vserver
- C. statit
- D. stats lun
Answer: B,C
NEW QUESTION 26
In a 4-node cluster, nodes 1 and 2 are an HA pair, and nodes 3 and 4 are an HA pair. The following error appears in the log.
12/15/2018 15:48:47 node-2CRITICALclam.node.ooq: Node (name=node- 2, ID= 1001) is out of "CLAM quorum" (reason =quorum update).
In this scenario, which two statements are correct? (Choose two.)
- A. Node 2 takes over node 1.
- B. All LUNs are offline in the cluster.
- C. All LUNs are online in the cluster.
- D. Node 1 takes over node 2.
Answer: B,D
NEW QUESTION 27
A reboot was performed by a watchdog reset on the node.
In this scenario, which statement is true?
- A. The service processor no longer responds.
- B. The wafl_check command should be executed.
- C. In case of an L2 watchdog event, determine whether a core was dumped.
- D. In case of an L1 watchdog event, determine whether a panic message was recorded.
Answer: A
NEW QUESTION 28
Click the exhibit button.
A customer reports that storage latency has recently increased substantially. No changes have been introduced, and the traffic did not change.
Referring to the output shown in the exhibit, which corrective step should be taken?
- A. Move some volumes off the affected aggregate.
- B. Add more spindles.
- C. Perform the volume reallocation.
- D. Throttle the client traffic.
Answer: D
NEW QUESTION 29
A customer reports that a takeover has been disabled on an HA pair.
What would be a cause for this to happen?
- A. The HA interconnect is not functioning properly.
- B. The cluster network is not functioning properly.
- C. The interface for the hardware assist has become unavailable.
- D. There is a disk running too hot.
Answer: A
NEW QUESTION 30
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?
- A. The cloned volume must be split from the source volume before the LAN can be used.
- B. The cloned LUN needs to be mapped to an initiator group.
- C. The cloned LUN must be renamed to a different name than the name of the source LUN.
- D. The cloned LUN must be brought online.
Answer: A
NEW QUESTION 31
The error message shown below is reported in the EMS log file.
"[sis.changelog.full:warning]: Change logging metafile on volume DATA1 is full and can not hold any more fingerprint entries." What are two ways to solve this problem? (Choose two.)
- A. Clear the changelog manually so that the operation can restart.
- B. Modify the storage efficiency policy so that deduplication runs more frequently.
- C. Increase the size of the changelog to allow the operation to continue.
- D. Modify the threshold that triggers a deduplication operation.
Answer: C,D
NEW QUESTION 32
A customer has a 2-node MetroCluster. They experienced a complete power loss at site B.
The customer has lost connectivity to site B and now realizes that the DR partner at site A has not taken over the DR partner at site B.
Which two actions must be performed in this scenario? (Choose two.)
- A. On the DR partner at site B, perform the process to heal the root aggregate.
- B. On the DR partner at site A, perform the process to heal the data aggregates.
- C. On the DR partner at site A, perform the process to switchover.
- D. Ensure that site B is prevented from serving data or simply powered off (nodes and disk shelves).
Answer: A,C
NEW QUESTION 33
Click the exhibit button.
A customer notifies you that Active IQ is showing a warning that a broadcast domain in their environment has been configured with ports from multiple VLANs.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. A VLAN tag cannot be assigned to the e0M port, so the configuration is acceptable.
- B. You should move the e0M ports to a Broadcast Domain that is dedicated to only management traffic.
- C. You should configure e0M so that is tagged on VLAN 40.
- D. You should change the LIF service policy to net-intercluster to prevent the LIFs from failing over to the e0M ports.
Answer: C,D
NEW QUESTION 34
A customer complains that the copy offload does not work when copying large file from a Windows 8 client between the CIFS shares that are hosted on the same ONTAP cluster.
What are two reasons for this problem? (Choose two.)
- A. The client should be using Windows 10 for ODX support.
- B. SMB 3.0 disabled on the CIFS SVM.
- C. The source and target volumes reside on different cluster nodes.
- D. Deduplication is not enabled on the destination volume.
Answer: B,D
NEW QUESTION 35
An administrator wants to keep an automatic daily up-to-date copy of a volume at a disaster recovery location.
What should the administrator do to achieve this goal?
- A. Configure a SyncMirror relationship to the remote location.
- B. Perform an NDMP dump to the remote location.
- C. Configure a SnapMirror relationship to the remote location.
- D. Perform a volume relocation to the remote location.
Answer: C
NEW QUESTION 36
Which two statements are true about a data volume? (Choose two.)
- A. A data volume can be moved to any aggregate with space for it in the cluster.
- B. A data volume can be accessed by a user connected to any SVM.
- C. A data volume can be accessed by a LIF on any node.
- D. An SVM root or root load sharing mirror volume must be present on every node.
Answer: A,C
NEW QUESTION 37
Your customer added a new DS2246 shelf to an existing stack on their FAS8060A system. The customer then noticed that the new shelf's disks appear with the shelf serial number instead of the shelf ID in the sysconfig -r command output.
What is the reason for this problem?
- A. The ACP is cabled incorrectly.
- B. There is failed IOM module in the new shelf.
- C. The new shelf has the same ID as another shelf.
- D. The SAS is cabled incorrectly.
Answer: D
NEW QUESTION 38
Click the exhibit button.
You have just cabled a new shelf to a FAS8200. Running the system node run -node * sysconfig - a command indicates that multipath HA is configured. However, after running Config Advisor, you receive an error that your cabling is incorrect.
As indicated in the exhibit, which two actions will correct the cabling? (Choose two.)
- A. Move the 0b SAS connection on the bottom controller to 0d on the bottom controller.
- B. Move the 0b SAS connection on the top controller to 0d on the top controller.
- C. Move the 0b SAS connection on the top controller to 0d on the bottom controller.
- D. Move the 0b SAS connection on the bottom controller to 0d on the top controller.
Answer: A,B
NEW QUESTION 39
A customer reports that one their SVMs has two default gateways. The customer wants to know whether this behavior is expected or if one of gateways should be deleted.
In this scenario, what do you tell the customer?
- A. The configuration is acceptable. The customer can achieve load balancing between the default gateways by setting the same metric on all default routes.
- B. The configuration is acceptable only if both default gateways are in the same subnet.
- C. This situation is a misconfiguration, and the customer should delete one of the default gateways because there can be only gateway for each SVM.
- D. The configuration is acceptable if the customer configures different metrics on all defaults routes.
Answer: D
NEW QUESTION 40
Two weeks ago, your customer experienced a data outage, which caused their MCC to switch over. When the power was restored, they found that 14 disks over three RAID groups had failed, which caused two data aggregates to lose their mirror plexes.
In this situation, before you perform a switchback, which three actions should be taken? (Choose three.)
- A. Initiate the aggregate healing phases.
- B. Adjust bridge configuration for the replaced disks.
- C. Assign all disks on the remote site to the surviving nodes.
- D. Delete the failed plexes.
- E. Mirror the unmirrored aggregates
Answer: A,B,E
NEW QUESTION 41
A customer calls you about a performance issue that they experienced over the past few days. They want to know if data collection and root cause analysis (RCA) is possible for this issue. This issue appears to be a one time event.
Which tool would be used to satisfy the customer's request?
- A. OneCollect
- B. perfstat
- C. Performance Archive
- D. perfmon
Answer: A
NEW QUESTION 42
Click the exhibit button.
Your customer reports that their FAS2554A system reports multi-path HA when running the sysconfig command. However, Config Advisor reports an error about incorrect cabling.
What are the two reasons for the messages? (Choose two.)
- A. Disk shelves 10 and 20 are cabled incorrectly to each other.
- B. Shelves 10 and 20 have different IOM modules and must be in separate stacks.
- C. The DS2246 shelf is wrong; the shelf ID must be 11.
- D. The FAS2554 system is cabled incorrectly to shelf ID 20.
Answer: A,D
NEW QUESTION 43
Click the exhibit button.
You execute a few commands and many fail, as shown in the exhibit.
What could cause the error?
- A. The aggregates were manually brought offline.
- B. The bcomd user space process on cluster1-02 failed.
- C. The cluster-02 node is down.
- D. The mgwd user space process on cluster1-02 failed.
Answer: C
NEW QUESTION 44
A customer has created an interface group (igroup) named a0a, a VLAN named a0a-2500, and a data LIF associated with the VLAN interface that has been assigned an IP of 10.254.10.100. The customer is able to ping 10.254.10.100 from a Windows client without any issues, but data traffic is not working.
In this scenario, what is the solution to the problem?
- A. Allow data traffic by using LIF firewall policies.
- B. Correct the MTU mismatch between the broadcast domain configuration and the upstream network switches.
- C. Configure an appropriate service policy for the data LIF.
- D. Disable flow control on the a0a interface.
Answer: A
NEW QUESTION 45
Click the exhibit button.
Your customer is calling about their MetroCluster environment. They have provided you with the output of the metrocluster interconnect adapter show command.
Referring to the exhibit, which statement is correct?
- A. The InfiniBand cables should be connected in this configuration.
- B. For all MetroCluster configurations, this is expected output.
- C. The InfiniBand interconnect is not used in MetroCluster.
- D. This is a 2-node MetroCluster.
Answer: B
NEW QUESTION 46
A customer's FAS8200 node1 went down an hour ago after a WAFL inconsistency error. All data is being served from partner node2, but the storage failover show command output is not showing a node1 as "Waiting for giveback".
What is the corrective action for this situation?
- A. From the LOADER prompt, run the wafliron command on the system's root aggregate.
- B. Boot the system and run the WAFL_check command on the inconsistent data aggregate.
- C. Re-create the root aggregate on node1.
- D. Boot the system and run the wafliron command on the inconsistent data aggregate.
Answer: C
NEW QUESTION 47
Click the exhibit button.
You are investigating an AutoSupport Disk Redundancy Failed alert. Cluster A lost connectivity to storage bridge BrB1, while cluster B lost connectivity to storage bridge BrA1.
Referring to the exhibit, which three components need investigation? (Choose three.)
- A. FC switch SwB1
- B. ISL cables
- C. FC switch SwA2
- D. storage bridges BrB1
- E. FC switch SwA1
Answer: A,B,E
NEW QUESTION 48
You migrated from a FAS3250 system to a new A200 system. After the migration, you notice that data compaction fails to be enabled on the migrated volumes.
In this scenario, which statement is correct?
- A. You need to schedule background deduplication on all volumes.
- B. Data compaction is not supported on the A200 system.
- C. You need a license to have full efficiency on AFF systems.
- D. The volumes are thick-provisioned.
Answer: D
NEW QUESTION 49
......
Realistic Prep4sureGuide NS0-592 Dumps PDF - 100% Passing Guarantee: https://www.prep4sureguide.com/NS0-592-prep4sure-exam-guide.html