[Jan-2022] Verified VMware 5V0-31.20 Bundle Real Exam Dumps PDF
5V0-31.20 Dumps PDF New [2022] Ultimate Study Guide
NEW QUESTION 13
An administrator is deploying a workload domain that is composed of three cluster with 32 hosts each.
What is the minimum NSX-T Manager from factor that must be deployed in the VMware Cloud Foundation management domain?
- A. Small
- B. Extra-Small
- C. Medium
- D. Large
Answer: D
NEW QUESTION 14
An administrator has been tasked with updating license keys in a VMware Cloud Foundation environment. These licenses include:
* VMware vSphere
* VMware vSAN
* VMware vCenter Server
* VMware NSX-T Data Center
Where must an administrator go in order to update the specified license keys?
- A. VMware vCenter > Administration > Licensing
- B. VMware vRealize Suite Lifecycle Manager > Locker
- C. SDDC Manager > Inventory
- D. SDDC Manager > Administration > Licensing
Answer: C
NEW QUESTION 15
The VMware Cloud Foundation management domain has been deployed, and post-deployment tasks can now be completed. The administrator needs to configure Single Sign-On for VMware Cloud Foundation user authentication.
Which two authentication sources can be used to accomplish this task? (Choose two )
- A. RADIUS
- B. Novell Directory Services
- C. OpenLDAP
- D. Apache DS
- E. Active Directory
Answer: A,C
NEW QUESTION 16
What is the advantage of using spwie and leaf underlay network over hierarchical multi-tier topology used in VMware Cloud Foundation?
- A. It is the only topology supported in VMware Cloud Foundation
- B. It supports 10 CiB/s connections for ESXi hosts.
- C. It provides greater flexibility especially when scaling out.
- D. It is required to support containers in VMware Cloud Foundation.
Answer: D
NEW QUESTION 17
What is the benefit of placing vRealize Suite I ifecycle Manager on the cross-region Application Virtual Network?
- A. After a recovery, an administrator can continue using the same IP address, DNS record, and routing configuration
- B. SDDC Manager uses the cross-region network to deploy vRealize Log Insight and vRealize Automation Proxy Servers, and this is not configurable.
- C. vRealize Suite Lifecycle Manager can be deployed in cluster mode
- D. vRealize Suite Lifecycle Manager cannot be placed on the cross-region network as it is reserved for Workload VMs only.
Answer: D
NEW QUESTION 18
Which sizing tool is available for calculating management domain storage requirements?
- A. VMware Compatibility Guide
- B. Virtualization Assessment Package
- C. VMware Configuration Maximums
- D. vSAN ReadyNode Sizer
Answer: B
NEW QUESTION 19
An administrator has been tasked with increasing the available capacity within an existing Cloud Foundation deployment to support the deployment of a production Workload Management cluster.
The VMware Cloud Foundation environment consists of a single workload called Production. The Production workload domain consists of a single vSAN Cluster called Production-01 that existing Virtual Machines. During the original deployment, even through automated firmware updates were not required, the Production workload domain was configured to use vSphere Lifecycle Images to automate its ongoing lifecycle management.
Four new hosts have been commissioned in SDDC Manager to support Workload Management. The new hosts are identically configured to the hosts that are currently deployed into the Production-01 cluster.
Which process must the administrator complete to enable Workload Management?
- A. Create a new vSAN Cluster within the Production workload domain
- B. Create a new vSAN Cluster within a new vSphere Lifecycle Manager Baseline-based workload domain.
- C. Extend the Production-01 vSAN cluster with the additional four hosts.
- D. Create a new vSAN Cluster within a new vSphere Lifecycle Manager Image-based workload domain.
Answer: C
NEW QUESTION 20
An administrator is tasked with deploying a new workload domain into an existing VMware Cloud Foundation environment. Which two storage types are supported? (Choose two.)
- A. VMFS on FC
- B. vSAN
- C. SMB3.0
- D. NFS v2
- E. VMFS on iSCSI
Answer: C,E
NEW QUESTION 21
A system administrator is creating an NSX-T Edge cluster with two-tier routing to the workload domain. The administrator select Workload Management as a use case which requires Large Edge Form Factor.
What are the hardware specifications of an NSX Edge Large appliance?
- A. 32 GB memory. 16 vCPU, and 250 GB disk space
- B. 64 GB memory. 8 vCPU. and 700 GB disk space
- C. 64 GB memory, 16 vCPU. and 250 GB disk space
- D. 32 GB memory, 8 vCPU, and 200 GB disk space
Answer: D
NEW QUESTION 22
An administrator is preparing to enable the vSphere with Tanzu for workload management.
Which selection must be made when automating the deployment of the NSX-T Edge Cluster using the SDDC Manager Ul (user interface)?
- A. Select the Custom use case, and then select the large Edge Form Factor
- B. Select the Workload Management use case
- C. Select the Custom use case, and then select the small Edge Form Factor.
- D. Select the Workload Management use case, and the select the large Edge Form Factor
Answer: D
NEW QUESTION 23
An administrator is required to deploy a new workload domain for a new business unit that must use its own NSX-I instance.
Which two Components will be deployed in the management domain during the workload domain creation? (Choose two.)
- A. Additional SDDC Manager
- B. Standalone Platform Services Controller
- C. NSX-T Manager
- D. vCenter Server
- E. NSX-T Edge node
Answer: C,E
NEW QUESTION 24
Which two integrations, in addition to computing resources, are provided in vSPhere with Tanzu to deliver a native experience (Choose two.)
- A. Advanced Monitoring with VMware Tools
- B. IP Address Management via External Services
- C. Cloud Native Storage via vSAN
- D. Hypervisor Integration with KVM Hosts
- E. Networking via NSX Container Plugin
Answer: A,B
NEW QUESTION 25
A management domain Each workload domain is comprised of two Clusters with 19 hosts in each. There is a requirement to keep the NSX-T Manager instances to a minimum for ease of management Which NSX-T Manager VM appliance sizing option should the architect choose to support the workload domains using the minimum number of NSX-T Manager clusters?
- A. Deploy one NSX-T Manager cluster using the medium VM appliance size to support all three workload domains.
- B. Deploy three NSX-T Manager clusters using the medium VM appliance size and assign one NSX-T Manager cluster per workload domain.
- C. Deploy one NSX-T Manager cluster using the large VM appliance size to support all three workload domains.
- D. Deploy three NSX-T Manager clusters using the large VM appliance size and assign one NSX-T Manager cluster per workload domain.
Answer: C
NEW QUESTION 26
An administrator has been tasked with enabling north/south routing and the consumption of additional network services by deploying an NSX Edge Cluster into a VMware Cloud Foundation deployment The following information is available:
* There is only one Workload Domain.
* The Workload domain contains two vSphere Clusters.
* One of the vSphere Clusters is a Stretched Cluster
* All hosts within the Workload Domain are identical.
* The physical network uses both the Border Gateway Protocol (BGP) and Bidirectional Forwarding Detection (BFD) protocol Which statement is true when considering the deployment of an NSX Edge Cluster in this situation?
Which statement is true when considering the deployment of an NSX Edge Cluster in this situation?
- A. BDF must be selected when deploying the NSX Edge cluster.
- B. The Default profile type must be selected when deploying the NSX Edge cluster.
- C. The NSX Edge cluster cannot be deployed onto the Stretched Cluster.
- D. The Small form factor must be selected when deploying the NSX Edge cluster.
Answer: B
NEW QUESTION 27
Which two statements accurately characterize vSphere Pods? (Choose two )
- A. A vSphere Pod can run only one container, and the minimum number of vSphere Pods in a cluster is three pods.
- B. A vSphere Pod can use normal vSphere Standard Switch and vSphere Distributed Switch
- C. A vSphere Pod is the smallest building block of vSphere with Tanzu that can run containerized applications.
- D. A vSphere Pod is a Kubemetes pod that runs on Tanzu Kubemetes Cluster
- E. A vSphere Pod is just a VM that runs a minimal version of Photon OS and container runtime on top of it.
Answer: C,D
NEW QUESTION 28
An administrator is tasked with preparing the hosts for a new VMware Cloud Foundation environment. The new environment will be installed in a facility far away from the administrator, and the hosts must be reachable remotely as soon as they are cable and powered-on in the rack. To reduce cost the new hosts do not have out of band management.
Which two steps should the administrator take to prepare for this deployment? (Choose two.)
- A. Validate MTU of 1600 is set on Management VLAN.
- B. Configure the VMware Imaging Appliance service.
- C. Create a Cluster Image profile
- D. Download the ESXi ISO and VIBs
- E. Configure UEFI support in the host BIOS-
Answer: A,B
NEW QUESTION 29
An administrator adds permissions to a namespace m vSphere with Tanzu.
Which prerequisite must be satisfied before a user or group can be assigned to a namespace?
- A. It must be assigned with Administrator role on SDDC Manager level.
- B. It must be assigned with Administrator role in vCenter Server
- C. It must be a member of vSphere SSO identity source
- D. It must be created in Kubernetes cluster.
Answer: B
NEW QUESTION 30
An administrator creates a management domain using the VMware Cloud Bulkier appliance Which type of storage must be used as principal storage for the management domain?
- A. vSAN
- B. NFS
- C. VMFS on FC
- D. VMFS on FCoE
Answer: A
NEW QUESTION 31
Which network type within SDDC Manager must be added to the Network Pool to support the deployment of a Workload Domain that will only use vSAN storage?
- A. vMotion and vSAN
- B. vMotion. vSAN, and Management
- C. vMotion only
- D. vMotion and NFS
Answer: C
NEW QUESTION 32
A customer wishes to integrate their VMware Cloud Foundation deployment with Microsoft CA to be used for SDDC certificate rotation. Which three requirement achieve this configuration? (Choose three.)
- A. Configure and issue a VMware Certificate template for Machine SSL and Solution User certificates on the CA server.
- B. Ensure that the service account which is configured on the SDDC Manager has the least privilege access to the Certificate Authority Service
- C. Configure the web server (IIS) security setting to use basic authentication.
- D. Deploy a separate Microsoft ADFS server to integrate with the Microsoft CA server.
- E. Integrate OpenSSl with Microsoft CA Server so CSRs can be generated for all appliances.
- F. Configure the web server (IIS) security setting to use Integrated Windows Authentication.
Answer: A,E,F
NEW QUESTION 33
An administrator has deleted an NSX manager application from the management domain by accident and now needs to restore the NSX Manager application as soon as possible.
Which three steps are necessary to accomplish this goal? (Choose three)
- A. Refresh the SSH Keys that are stored in the SDDC Manager inventory
- B. Download and decrypt the encrypted backup file from the SF IP server
- C. Configure the new NSX Manager appliance with SFTP server settings.
- D. Deploy a new NSX Manager appliance.
- E. Create a JSON file containing the NSX Manager configuration, and insert an API access token
- F. Restore a known good configuration.
Answer: B,E,F
NEW QUESTION 34
......
VMware 5V0-31.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
Pass Your VMware Exam with 5V0-31.20 Exam Dumps: https://www.prep4sureguide.com/5V0-31.20-prep4sure-exam-guide.html
5V0-31.20 Exam Dumps PDF Updated Dump: https://drive.google.com/open?id=1BB1GyNpUwVEd0GcyJkXH_AQUiEtGnVep