Get Latest [Aug-2021] Conduct effective penetration tests using Prep4sureGuide EX200
Penetration testers simulate EX200 exam PDF
NEW QUESTION 27
Download ftp://192.168.0.254/pub/boot.iso to /root, and mounted automatically under /media/cdrom and which take effect automatically at boot-start.
Answer:
Explanation:
see explanation below.
Explanation
# cd /root; wget ftp://192.168.0.254/pub/boot.iso
# mkdir -p /media/cdrom
# vim /etc/fstab
/root/boot.iso /media/cdrom iso9660 defaults,loop 0 0
# mount -a
mount [-t vfstype] [-o options] device dir
NEW QUESTION 28
SIMULATION
Configure iptables, there are two domains in the network, the address of local domain is 172.24.0.0/16 other domain is 172.25.0.0/16, now refuse domain 172.25.0.0/16 to access the server.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
iptables -F
service iptables save
iptables -A INPUT -s 172.25.0.0/16 -j REJECT
service iptables save
service iptables restart
NEW QUESTION 29
Upgrading the kernel as 2.6.36.7.1, and configure the system to Start the default kernel, keep the old kernel available.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# cat /etc/grub.conf
# cd /boot
# lftp it
# get dr/dom/kernel-xxxx.rpm
# rpm -ivh kernel-xxxx.rpm
# vim /etc/grub.conf
default=0
NEW QUESTION 30
The system ldap.example.com provides an LDAP authentication service.
Your system should bind to this service as follows:
The base DN for the authentication service is dc=domain11, dc=example, dc=com LDAP is used to provide both account information and authentication information. The connection should be encrypted using the certificate at http://host.domain11.example.com/pub/domain11.crt When properly configured, ldapuserX should be able to log into your system, but will not have a home directory until you have completed the autofs requirement. Username: ldapuser11 Password: password
Answer:
Explanation:
see explanation below.
Explanation
* system-config-authentication LDAP user DN=dc=domain11,dc=example,dc=com Server= host.domain11.example.com Certificate
http://host.domain11.example.com/pub/domain11.crt (enter url carefully, there maybe // or ..) LDAP password OK starting sssd
* su -ldapuser11 Display Bash prompt #exit
NEW QUESTION 31
CORRECT TEXT
Download ftp://192.168.0.254/pub/boot.iso to /root, and mounted automatically under /media/cdrom and which take effect automatically at boot-start.
Answer:
Explanation:
# cd /root; wget ftp://192.168.0.254/pub/boot.iso
# mkdir -p /media/cdrom
# vim /etc/fstab
/root/boot.iso /media/cdrom iso9660 defaults,loop 0 0
# mount -a
mount [-t vfstype] [-o options] device dir
NEW QUESTION 32
CORRECT TEXT
Configure the verification mode of your host account and the password as LDAP. And it can ldapuser40. The password is set as "password". And the certificate login successfully through
can be downloaded from http://ip/dir/ldap.crt. After the user logs on , the user has no host directory unless you configure the autofs in the following questions.
Answer:
Explanation:
system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP)
OR
# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA
Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40
NEW QUESTION 33
Configure a task: plan to run echo hello command at 14:23 every day.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# which echo
# crontab -e
23 14 * * * /bin/echo hello
# crontab -l (Verify)
NEW QUESTION 34
Update the kernel from ftp://instructor.example.com/pub/updates.
According the following requirements:
* The updated kernel must exist as default kernel after rebooting the system.
* The original kernel still exists and is available in the system.
Answer:
Explanation:
see explanation below.
Explanation
rpm -ivh kernel-firm...
rpm -ivh kernel...
NEW QUESTION 35
Find the files owned by harry, and copy it to catalog: /opt/dir
Answer:
Explanation:
see explanation below.
Explanation
# cd /opt/
# mkdir dir
# find / -user harry -exec cp -rfp {} /opt/dir/ \;
NEW QUESTION 36
SIMULATION
Install the Kernel Upgrade.
Install suitable kernel update from:
http://server.domain11.example.com/pub/updates.
Following requirements must be met:
Updated kernel used as the default kernel of system start-up.
The original kernel is still valid and can be guided when system starts up.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: Using the browser open the URL in the question, download kernel file to root or home directory.
uname -r// check the current kernel version
rpm -ivh kernel-*.rpm
vi /boot/grub.conf// check
Some questions are: Install and upgrade the kernel as required. To ensure that grub2 is the default item for startup.
Yum repo : http://content.example.com/rhel7.0/x86-64/errata
OR
uname -r // check kernel
Yum-config-manager --add-repo="http://content.example.com/rhel7.0/x86-64/ errata" Yum clean all Yum list kernel// install directly Yum -y install kernel// stuck with it, do not pipe! Please do not pipe!
Default enable new kernel grub2-editenv list// check
Modify grub2-set-default "kernel full name"
Grub2-mkconfig -o/boot/grub2/grub.cfg// Refresh
NEW QUESTION 37
How is cloud-init integrated with a managed system image?
- A. cloud-init provides a Linux kernel module that must be included and loaded in the instance's initramfs.
- B. cloud-init provides the cloud-init-daemonservice which is launched during startup and keeps the
instance in sync with the desired configuration. - C. cloud-init provides its own startup mechanism which replaces the instance's original init system, such as
systemd. - D. cloud-init provides systemd units which must be included in several stages of the booting process of the
instance. - E. cloud-init provides the cloud-init-workercommand which has to be invoked periodically within the
running instance.
Answer: A
NEW QUESTION 38
CORRECT TEXT
Create a volume group, and set 16M as a extends. And divided a volume group containing 50 extends on volume group lv, make it as ext4 file system, and mounted automatically under /mnt/data.
Answer:
Explanation:
# pvcreate /dev/sda7 /dev/sda8
# vgcreate -s 16M vg1 /dev/sda7 /dev/sda8
# lvcreate -l 50 -n lvm02
# mkfs.ext4 /dev/vg1/lvm02
# blkid /dev/vg1/lv1
# vim /etc/fstab
# mkdir -p /mnt/data
UUID=xxxxxxxx /mnt/data ext4 defaults 0 0
# vim /etc/fstab
# mount -a
# mount
(Verify)
NEW QUESTION 39
Resize the logical volume vo and its filesystem to 290 MB. Make sure that the filesystem contents remain intact.
Note: Partitions are seldom exactly the same size requested, so a size within the range of 260 MB to 320 MiB is acceptable.
Answer:
Explanation:
see explanation below.
Explanation
df -hT
lvextend -L +100M /dev/vg0/vo
lvscan
xfs_growfs /home/ // home is LVM mounted directory
Note: This step is only need to do in our practice environment, you do not need to do in the real exam resize2fs /dev/vg0/vo // Use this comand to update in the real exam df -hT OR e2fsck -f/dev/vg0/vo umount /home resize2fs /dev/vg0/vo required partition capacity such as 100M lvreduce -l 100M /dev/vg0/vo mount
/dev/vg0/vo /home
df -Ht
NEW QUESTION 40
Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
------------------------------------------------------------------------------- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
OR
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)
NEW QUESTION 41
Create a user alex with a userid of 3400. The password for this user should be redhat.
Answer:
Explanation:
see explanation below.
* useradd -u 3400 alex
* passwd alex
* su -alex
NEW QUESTION 42
SIMULATION
Update the kernel from ftp://instructor.example.com/pub/updates.
According the following requirements:
The updated kernel must exist as default kernel after rebooting the system.
The original kernel still exists and is available in the system.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: rpm -ivh kernel-firm...
rpm -ivh kernel...
NEW QUESTION 43
Adjust the size of the Logical Volume.
Adjust the size of the vo Logical Volume, its file system size should be 290M. Make sure that the content of this system is complete.
Note: the partition size is rarely accurate to the same size as required, so in the range 270M to 320M is acceptable.
Answer:
Explanation:
see explanation below.
Explanation
Addition
df -hT
lvextend -L +100M /dev/vg0/vo
Lvscan
xfs_growfs /home/ //home is the mounted directory of the LVM, this step just need to do in the practice environment, and test EXT4 does not need this step.
resize2fs /dev/vg0/vo// use this command to update in examination.
df -hT
OR
Subtraction
e2fsck -f/dev/vg0/vo
umount /home
resize2fs /dev/vg0/vo // the final required partition capacity is 100M lvreduce -l 100M /dev/vg0/vo mount /dev/vg0/vo/home df -hT
NEW QUESTION 44
......
Tested Material Used To EX200 Test Engine: https://www.prep4sureguide.com/EX200-prep4sure-exam-guide.html
Steps Necessary To Pass The EX200 Exam: https://drive.google.com/open?id=1pNo1pvpWalLTGLaP7Xf1BZIDARrl1qj9