Cisco 300-730 Deluxe Study Guide with Online Test Engine
300-730 dumps review - Professional Quiz Study Materials
Cisco 300-730 certification exam is designed for IT professionals who are responsible for implementing secure solutions with virtual private networks (VPNs) in enterprise environments. Implementing Secure Solutions with Virtual Private Networks certification validates the knowledge and skills required to implement, configure, and troubleshoot various VPN technologies, including site-to-site, remote access, and clientless SSL VPNs. 300-730 exam also covers advanced topics such as identity management, firewall policies, and network access control.
Cisco 300-730 certification exam is essential for professionals who want to enhance their technical knowledge of VPN technologies and establish their expertise in the field of networking. Implementing Secure Solutions with Virtual Private Networks certification can be an excellent way to validate one's skills and demonstrate to potential employers that they possess the necessary skills to implement secure VPN solutions with Cisco technologies. Furthermore, those who pass the 300-730 exam will earn the Cisco Certified Specialist - Network Security VPN Implementation certification, which helps individuals differentiate themselves in the market and provides an opportunity for better career prospects and higher salaries.
NEW QUESTION # 29
A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?
- A. Basic Host Scan
- B. Cisco Secure Desktop
- C. Advanced Endpoint Assessment
- D. Endpoint Assessment
Answer: C
Explanation:
"If the end user disables antivirus or personal firewall after successfully establishing the VPN connection, our Advanced Endpoint Assessment feature attempts to re-enable that application within approximately 60 seconds." https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/administration/guide/b_AnyConnect_Administrator_Guide_4-0/configure-posture.html#ID-1407-00000047
NEW QUESTION # 30
Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)
- A. show dmvpn detail
- B. show ip nhrp traffic
- C. show ip traffic
- D. show crypto ipsec sa
- E. show crypto isakmp sa
Answer: B,E
Explanation:
Section: Secure Communications Architectures
NEW QUESTION # 31
Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)
- A. show dmvpn detail
- B. show ip nhrp traffic
- C. show ip traffic
- D. show crypto ipsec sa
- E. show crypto isakmp sa
Answer: B,E
NEW QUESTION # 32 
Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile.
When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?
- A. Primary protocol should be SSL.
- B. The IP address is incorrect.
- C. UserGroup must match connection profile.
- D. The HostName is incorrect.
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891
NEW QUESTION # 33
An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur?
- A. The ISAKMP policy priority values are invalid.
- B. ESP traffic is being dropped.
- C. Tunnel protection is not applied to the DMVPN tunnel.
- D. The Phase 1 policy does not match on both devices.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/111976-dmvpn-troubleshoot-00.html The MMNOSTATE failure occurs when the ISAKMP policy priority values are not configured correctly on both devices. The ISAKMP policy priority values are used to determine the order in which the ISAKMP policies are applied. If the priority values do not match between the two devices, the ISAKMP tunnel may not be established correctly, resulting in the MMNOSTATE failure. To resolve this issue, the engineer should ensure that the ISAKMP policy priority values are configured correctly on both the router and the peer.
NEW QUESTION # 34
Refer to the exhibit.
All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA. What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?
- A. Tunnel Network List Below under Group Policy
- B. Same-security-traffic permit inter-interface under Group Policy
- C. Exclude Network List Below under Group Policy
- D. Tunnel All Networks under Group Policy
Answer: D
Explanation:
The reason is that by default, the SSL VPN clients use split tunneling, which means they only send traffic destined for the corporate network through the VPN tunnel, and use their local gateway for other traffic, such as browsing the internet. This means that when they search for their IP address on a browser, they will see their local IP address, not the IP address of the ASA.
To change this behavior, you need to configure the Group Policy on the ASA to tunnel all networks, which means that all traffic from the SSL VPN clients will go through the VPN tunnel, regardless of the destination. This way, when they search for their IP address on a browser, they will see the IP address of the ASA, which is 3.3.3.3.
To configure tunnel all networks under Group Policy, you can use either ASDM or CLI. For example, using ASDM, you can follow these steps1:
Choose Configuration > Remote Access VPN > Network (Client) Access > Group Policies.
Select the group policy that you want to modify and click Edit.
In the Edit Internal Group Policy window, choose Advanced > Split Tunneling.
In the Policy drop-down list, choose Tunnel All Networks.
Click OK and then Apply.
Using CLI, you can enter these commands:
ciscoasa(config)# group-policy <group_policy_name> attributes ciscoasa(config-group-policy)# split-tunnel-policy tunnelall
NEW QUESTION # 35
A network engineer must expand a company's Cisco AnyConnect solution. Currently, a Cisco ASA is set up in North America and another will be installed in Europe with a different IP address. Users should connect to the ASA that has the lowest Round Trip Time from their network location as measured by the AnyConnect client. Which solution must be implemented to meet this requirement?
- A. VPN Load Balancing
- B. Optimal Gateway Selection
- C. DNS Load Balancing
- D. IP SLA
Answer: B
Explanation:
Optimal Gateway Selection (OGS). OGS is a feature that can be used in order to determine which gateway has the lowest Round Trip Time (RTT) and connect to that gateway. One can use the OGS feature in order to minimize latency for Internet traffic without user intervention. With OGS, Cisco AnyConnect Secure Mobility Client (AnyConnect) identifies and selects which secure gateway is best for connection or reconnection. OGS begins upon first connection or upon a reconnection at least four hours after the previous disconnection.
NEW QUESTION # 36
Which statement about GETVPN is true?
- A. The pseudotime that is used for replay checking is synchronized via NTP.
- B. Group members must acknowledge all KEK and TEK rekeys, regardless of configuration.
- C. The configuration that defines which traffic to encrypt originates from the key server.
- D. TEK rekeys can be load-balanced between two key servers operating in COOP.
Answer: C
Explanation:
KS (key server) is 'caretaker' of the GM group. Group registrations and authentication of GMs is taken care of by KS server. Any GM who wants to join the group is required to be successfully authenticated in the group and sends encryption keys and policy to be used within the group.
===
https://ipwithease.com/introduction-to-getvpn/
NEW QUESTION # 37
An administrator is planning a VPN configuration that will encrypt traffic between multiple servers that will be passing unicast and multicast traffic. This configuration must be able to be implemented without the need to modify routing within the network. Which VPN technology must be used for this task?
- A. GETVPN
- B. VTI
- C. DMVPN
- D. FlexVPN
Answer: A
Explanation:
The VPN technology that must be used for this task is GETVPN (Group Encrypted Transport VPN). GETVPN is designed to encrypt both unicast and multicast traffic while preserving the original source and destination IP addresses, and it does not require any changes to the existing routing infrastructure. Additionally, GETVPN provides a scalable and efficient solution for encrypting traffic within a network, making it a good choice for this scenario.
NEW QUESTION # 38
Which VPN technology must be used to ensure that routers are able to dynamically form connections with each other rather than sending traffic through a hub and be able to advertise routes without the use of a dynamic routing protocol?
- A. GETVPN
- B. DMVPN Phase 2
- C. FlexVPN
- D. DMVPN Phase 3
Answer: D
Explanation:
DMVPN stands for Dynamic Multipoint VPN, which is a technology that allows routers to dynamically form VPN tunnels with each other without requiring a pre-configured static crypto map. DMVPN uses Multipoint GRE (mGRE) interfaces and Next Hop Resolution Protocol (NHRP) to establish direct connections between routers. DMVPN has three phases of operation, each with different features and benefits.
DMVPN Phase 1 is the basic configuration, where all spokes are configured with a single mGRE interface that points to the hub as the NHRP server. The spokes can only communicate with the hub, not with each other. All traffic must go through the hub, which creates a bottleneck and increases latency.
DMVPN Phase 2 improves on Phase 1 by allowing spoke-to-spoke communication without going through the hub. This is achieved by using NHRP to dynamically resolve the IP address of the destination spoke and create a direct GRE tunnel between the spokes. However, this still requires the use of a dynamic routing protocol to advertise routes between the spokes, which adds overhead and complexity.
DMVPN Phase 3 further enhances Phase 2 by enabling spoke-to-spoke communication without requiring a dynamic routing protocol. This is done by using NHRP shortcut switching and NHRP redirect messages. When a spoke wants to send traffic to another spoke, it sends an NHRP resolution request to the hub, which responds with an NHRP redirect message containing the IP address of the destination spoke. The source spoke then creates a direct GRE tunnel with the destination spoke and switches the traffic to the new tunnel. The hub also sends an NHRP resolution reply to the destination spoke, informing it of the source spoke's IP address. The destination spoke then creates a direct GRE tunnel with the source spoke and switches the traffic to the new tunnel. This way, the spokes can communicate directly without using a dynamic routing protocol or going through the hub.
NEW QUESTION # 39
Which redundancy protocol must be implemented for IPsec stateless failover to work?
- A. GLBP
- B. VRRP
- C. HSRP
- D. SSO
Answer: C
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike- protocols/17826-ipsec-feat.html
NEW QUESTION # 40
Refer to the exhibit.
A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?
- A. Reduce the maximum SA limit on the local Cisco ASA.
- B. Remove the maximum SA limit on the remote Cisco ASA.
- C. Increase the maximum in-negotiation SA limit on the local Cisco ASA.
- D. Correct the crypto access list on both Cisco ASA devices.
Answer: C
NEW QUESTION # 41
Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)
- A. show dmvpn detail
- B. show ip nhrp traffic
- C. show ip traffic
- D. show crypto ipsec sa
- E. show crypto isakmp sa
Answer: B,E
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/111976-dmvpn-troubleshoot-00.html
NEW QUESTION # 42
What is a characteristic of GETVPN?
- A. All peers have one IPsec SPI for inbound and outbound communication.
- B. Quick mode is used to create an IPsec SA.
- C. An ACL that defines interesting traffic must be configured and applied to the crypto map.
- D. The remote peer for the IPsec session is configured as part of the crypto map.
Answer: A
Explanation:
In GETVPN, all group members share a common security association (SA) database and the same keys for encryption and decryption. This approach avoids the need for per-peer IPsec SAs and simplifies the configuration and management of the VPN. Instead of using multiple SAs, GETVPN uses a single SA with a unique Group Domain of Interpretation (GDOI) group key that is distributed to all group members.
NEW QUESTION # 43
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$RemoteAccessVpnClient$*
- B. *$SecureMobilityClient$*
- C. *$DfltlkeldentityS*
- D. *$AnyConnectClient$*
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION # 44
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec-conn-dmvpn-xe-16-book/sec-conn-dmvpn-summ-maps.html
NEW QUESTION # 45
Refer to the exhibit.
Based on the configuration output, what is the VPN technology?
- A. multicast VPN
- B. L2VPN
- C. DMVPN
- D. site-to-site
Answer: B
NEW QUESTION # 46
Which VPN solution uses TBAR?
- A. GETVPN
- B. VTI
- C. DMVPN
- D. Cisco AnyConnect
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_getvpn/configuration/xe-3s/sec-get- vpn-xe-3s-book/sec-get-vpn.html
NEW QUESTION # 47
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. tunnel-group (webvpn-attributes)
- B. webvpn (global configuration)
- C. webvpn (group-policy)
- D. tunnel-group (general-attributes)
Answer: B
NEW QUESTION # 48
......
Exam Questions Answers Braindumps 300-730 Exam Dumps PDF Questions: https://www.prep4sureguide.com/300-730-prep4sure-exam-guide.html
300-730 Test Prep Training Practice Exam Questions Practice Tests: https://drive.google.com/open?id=1S5o5VxLnNvDC6kQXE5FeXXqfGeGsfdSU