Best Way To Study For F5 301a Exam Brilliant 301a Exam Questions PDF
Updated Verified Pass 301a Exam - Real Questions & Answers
Average Salary of F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Certified Professionals
The average salary of a AI-900: Microsoft Azure AI Fundamentals Exam Outlook and Modules Exam Certified Expert in:
- India - 9,71,117 INR
- Europe - 95,500 EURO
- England - 60,500 POUND
- United State - 110,500 USD
Difficulty in Attempting F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
The qualification test would not be that daunting whether the consumer has completed the F5-301a practice exam and has been through the F5-301a dumps so the user has shown aptitude for interpreting complex procedures. Our professional team at Prep4sureGuide advises that you take some notes on these subjects and practice the F5 301a exam dumps that we have published. All of these will help you pass this exam. This test is very complex for candidates who do not prepare during their training, and candidates would require access to a lab to practice. Then, in order to grasp the exam’s contents, you’ll need a lot of realistic experience. So, if someone is affiliated with some kind of company where he can train, but you can’t afford the lab and don’t have time to practice, As a result, the answer to this issue is Prep4sureGuide. For your training, we give the best F5 301a exam dumps and practice tests. F5 301a test dumps to guarantee your results on the first try in the F5 Certified Technology Specialists Certification Exam. Our F5 301a dumps are regularly revised. Prep4sureGuide offers a PDF and VCE file mix that will aid applicants in passing the test. Candidates will serve as an F5 Certified BIG-IP Administrator Network Engineer, F5 Certified BIG-IP Administrator Load Balancer/ADC, F5 Certified BIG-IP Administrator Architect, or F5 Certified BIG-IP Administrator Engineer after earning their F5 Certification. The candidate has the potential to raise $75,000 a month. Prep4sureGuide provides applicants with validated questions and correct responses that would be asked throughout their final test. As a result, candidates are more likely to achieve high scores on the final test, and one of the best things is that we even have F5 301a dumps in PDF format, which candidates can import and review offline.
NEW QUESTION 39
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10 .
Which source IP should be expected in the server-side connection?
- A. 10.20.0.2
- B. 10.20.0.1
- C. 10.50.0.2
- D. 192.168.0.10
Answer: A
NEW QUESTION 40
An LTM Specialist is experiencing issues in a failover event. Certain long-lasting FTP event. Certain long-lasting FTP connections using a single node pool are forced to reconnect. The bigip.conf extract is shown:
What does the LTM Specialist need to change in the configuration to avoid this issue?
- A. connection mirroring
- B. snatpool
- C. persistence mirroring
- D. ftp profile
Answer: A
Explanation:
The stem mentions that it is a single server node, so there is no need to consider the factors of session maintenance. The actual requirement is to maintain the original connection status during failover. You need to configure connection mirroring to synchronize the connection status between the devices in the cluster in real time.
NEW QUESTION 41
An LTM device an application that requires all connections to be secured via SSL The device must verify that request contain a specific cookie before allowing the request to be sent to the pool member.
Which virtual server type should an LTM Specialist configure on the LTM device?
- A. Forwarding (IP)
- B. Standard
- C. Stateless
- D. Performance (HTTP)
- E. Performance (Layer 4)
Answer: B
NEW QUESTION 42
An LTM Administrator receives an email from the NOC stating that the switch connected to the backend server was shut down for maintenance. The BIG-IP device handles only UDP traffic. The BIG IP device did not fail over to a DR location when no pool members were available.
When the LTM Administrator checks the pool, it confirms that the monitor is still marking UP the pool member.
A tcpdump of the traffic shows the following output:
A list of the monitor configuration shows the following:
Which two modifications to the LTM configuration will mark this pool member down, when the switch is down? (Choose two.)
- A. enable manuai-resume on the same monitor
- B. increase the timeout to three times the interval
- C. add a reverse string to the game monitor
- D. also assign a gatewayjcmp monitor to the pool
- E. enable reverse and wait for the next connection
Answer: C,D
NEW QUESTION 43
In an iApp, which configuration protects against accidental changes to an application Services configuration?
- A. Name
- B. Template
- C. Components
- D. Strict Updates
Answer: D
NEW QUESTION 44
An LTM Specialist observes decreased performance and intermittent connection reap LTM system.
Based on the configuration, which action will address these issues?
- A. Use a default caching profile on the virtual server.
- B. Use an optimized TCP profile.
- C. Use a shorter idle timeout on the TCP profile.
- D. Use a FastL4 profile on the virtual server
Answer: C
NEW QUESTION 45
An LTM Specialist needs to load balance an application using an LTM device to meet the requirements:
The application servers do NOT Support SSL, but client access to the application should be secured.
Multiple requests from the same client should be sent to the same pool member.
All pool members will have roughly the same processing power, and traffic should be distributed evenly.
The LTM device is NOT the pool members' default gateway.
which configuration should the LTM Specialist.
- A. a performance L4 virtual server with a Client SSL profile and Source Address persistence
- B. A standard virtual server with a SNAT, HTTP profile, Client profile, andd cookie persistance.
- C. A standard virtual server with a SNAT, HTTP profile Server SSL profile, and cookie persistence
- D. a performance 14 virtual server with a SNAT and cookie persistence
- E. A performance L4 virtual server with a SNAT, HTTP profile. Server SSL profile, and cookie persistence
Answer: B
NEW QUESTION 46
A web server is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device. The configuration of the virtual server is as follows:
Which change must be made to the configuration to perform SSL offloading?
- A. Remove the severssl profile
- B. Remove the clientssl and http profiles
- C. Remove the clientssl and serverssl profiles
- D. Remove the clients profile
Answer: A
NEW QUESTION 47
Exhibit.
The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover.
Which HA functionality works in this case?
- A. ConfigSync does NOT work; Connection Mirroring works
- B. ConfigSync works. Connection Mirroring docs NOT work
- C. ConfigSync works Connection Mirroring works
- D. ConfigSync does NOT work. Connection Mirroring floes NOT work.
Answer: A
NEW QUESTION 48
The network team has recently added a new syslog server with IP address 10.1.1.1.
Which command adds the new syslog entry on the F5 LTM device?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: C
NEW QUESTION 49
Remote users who access the LTM device are authenticated via Radius. The default remote user role is Guest Some users need LTM device with the Administrator role. The F5 Radius attributes are configure on the Radius server.
Which configuration item needs to be created?
- A. Admin account
- B. User role
- C. Remote User role
- D. User account
Answer: C
NEW QUESTION 50
AN LTM Specialist needs to determine the delay between an LTM device and the internal web server for a specific client.
Which two AVR reporting options should the LTM Specialist enable to measure the delay? (Choose two.)
- A. Methods
- B. User agents
- C. Client IP
The problem is to specify the server delay of the client - D. Server latency
- E. Response codes
Answer: C,D
NEW QUESTION 51
Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device.
What are the required profile and persistence settings for a standard virtual server?
- A. tcp, ftp - Source address persistence
- B. tcp - no persistence profile will be used
- C. tcp, clientssl, serverssl persistence
- D. tcp, ctientsst, ftp serverssl persistence
Answer: A
NEW QUESTION 52
A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.
Which virtual server type should an LTM Specialist configure on the LTM device?
- A. Forwarding (IP)
- B. Forwarding (Layer 2)
- C. Standard
- D. DHCP relay
- E. Stateless
Answer: A
NEW QUESTION 53
A Client makes the request displayed below to the application server.
Which virtual server type should an LTM Specialist use to load balance based on the URI?
.
- A. Forwarding (Layer 2)
- B. Standard
- C. Stateless
- D. Performance (Layer 4)
Answer: B
NEW QUESTION 54
AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has marked the node down because it exceeded the specific threshold. The disk usage on the server has been corrected below the threshold, however, the node remains offline.
Which feature is causing this problem?
- A. The value for Manual Resume is set to Yes
- B. The value of Manual Resume is set to No
- C. The value for UP interval is enable with a value greater than 0
- D. The parameter Time Until UP has a value greater than 0
Answer: A
NEW QUESTION 55
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?
- A. --START CERTIFICATE....
- B. ...SECURITY CERTIFICATE....
- C. ...SSL CERTIFICATE....
- D. ...BEGIN CERTIFICATE....
Answer: D
NEW QUESTION 56
......
How much F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Cost and Details
Examination Name F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Passing Score: 260 Length of Exam: 95 min Types of questions: Multiple Choice Questions No. of Questions: 82 Questions Examination Fees: $175 USD
Updated PDF (New 2021) Actual F5 301a Exam Questions: https://www.prep4sureguide.com/301a-prep4sure-exam-guide.html
Dumps Moneyack Guarantee - 301a Dumps Approved Dumps: https://drive.google.com/open?id=1cWipSob1AVf9WhoLJTT7js1Ew6EZVmAu