2022 Valid JN0-1362 test answers & Juniper Exam PDF
Free Juniper JN0-1362 Exam Questions & Answer from Training Expert Prep4sureGuide
NEW QUESTION 50
Exhibit.
You are asked to ensure that most traffic that traverses your network is load balanced over all of the equal cost links between the routers in your network. However, you must also ensure that traffic from ISP A that is destined for ISP D must traverse the R1-R2-R3-R4-R5 path.
Referring to the exhibit how would you accomplish this task?
- A. Adjust the BGFs LOCAL PREF attribute to ensure that the raw IP packets follow the required path.
- B. Force the ISP A to ISP D traffic over RSVP-signaled LSPs.
- C. Force the ISP A to ISP D traffic over LDP-signaled LSPs.
- D. Adjust the OSPF metrics of each link so that the raw IP packets follow the required path.
Answer: B
NEW QUESTION 51
Exhibit.
You want to design a VPN service that will allow your enterprise the ability to span their VLANs between the four sites shown in the exhibit, while allowing point-to-multipoint connectivity.
Which two MPLS VPN technologies allow this type of functionality (Choose two.)
- A. Layer 3 VPN
- B. VPLS
- C. Layer 2 VPN
- D. EVPN
Answer: A,D
NEW QUESTION 52
Click the Exhibit button:
Referring to the exhibit, which mechanism is used to advertise routes from the enterprise network to the service provider network?
- A. BGP import policies
- B. BGP flowspec
- C. BGP export policies
- D. firewall filters
Answer: A
NEW QUESTION 53
You are designing the physical redundancy for a service provider network and are checking for potential risks due to fate sharing.
Which two sources of fate sharing should you examine in this scenario? (Choose two.)
- A. hardware vendor
- B. fiber conduit
- C. MPLS LSP
- D. building location
Answer: C,D
NEW QUESTION 54
As a service provider network architect, you are working with a potential customer who wants to replace their WAN, consisting of two data centers, one HQ, and 76 branch offices Due to application latency requirements between branch offices, the customer insists that all traffic must take the most optimal path through the service provider network. The customer intends to encrypt all traffic between customer routers at each location.
Which WAN technology would you propose in this scenario?
- A. point-to-point Layer 2 VPNs
- B. H-VPLS
- C. Internet as WAN
- D. Layer 3 VPN
Answer: C
NEW QUESTION 55
You are designing an MPLS-based network overlay for your environment that use either LDP or RSVP-signated LSPs.
Which two statements are true about these two signaling technologies (Choose two.) Which two statements are true about these two signaling technologies? (Choose two.)
- A. RSVP enables an administrator to configure different traffic types to take different paths across the MPLS network.
- B. LDP uses EROs to influence the path of an LSP and enable traffic engineering.
- C. LDP leverages the IGP to find the best path across the network.
- D. RSVP requires the traffic engineering database (TED) to find the best path across the network.
Answer: A,C
NEW QUESTION 56
You have a service provider customer that wants to offer services in a new market. They need to have a lower cost-of-entry broadcast network gateway.
Which product would satisfy this requirement?
- A. vSRX with the appropriate licenses
- B. vCPE with the appropriate licenses
- C. vMX with the appropriate licenses
- D. uCPE with the appropriate licenses
Answer: C
NEW QUESTION 57
Your customer's enterprise is adding geographically dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost.
Which type of WAN connection satisfies the customer's requirement in this scenario?
- A. leased line dedicated circuit
- B. Internet connection with IPsec
- C. transparent Layer 2 service
- D. MPLS Layer 3 VPN
Answer: C
NEW QUESTION 58
Exhibit.
You are asked to design a solution that will provision a circuit from the corporate headquarters to a remote branch. The circuit must be secure, and must support IGP adjacencies. IPsec has been chosen to secure traffic across the WAN connection.
Referring to the exhibit which statement describes another requirement for this circuit to function correctly?
- A. You must use a service provider Layer 3 VPN to establish routing protocols across the circuit
- B. You must implement GRE over IPsec to establish routing protocols across the circuit.
- C. You must use a service provider Layer 2 VPN to establish routing protocols across the circuit.
- D. You must increase the MTU of the IPsec tunnel to more than 1500 bytes to allow routing updates across the circuit.
Answer: B
NEW QUESTION 59
You are creating a WAN solution design for an enterprise customer. The customer will be connecting three sites in different locations. The customer wants all of the sites to be part of the same Layer 2 network.
In this scenario, what are two valid connection methods you would provide in your design? (Choose two.)
- A. NG-MVPN
- B. IPsecVPN
- C. leased line
- D. EVPN
Answer: B,D
NEW QUESTION 60
You are asked to design a WAN for a large enterprise. Each site must have multiple connections for redundancy. MPLS is not available at every site but it is preferred where available.
Which topology satisfies these design requirements?
- A. hub-and-spoke Internet WAN
- B. full mesh SD-WAN
- C. full mesh MPLS VPN
- D. hub-and-spoke SD-WAN
Answer: D
NEW QUESTION 61
Your customer is paying for traffic prioritization and you must ensure that all traffic from their 172.27.10.0/24 network receives top priority through your network.
Which action will satisfy this requirement?
- A. Apply a multifield classifier to the ingress interfaces.
- B. Apply a custom rewrite rule to the ingress interface.
- C. Apply a behavior aggregate classifier to the egress interface.
- D. Apply a custom scheduler map to the ingress interface.
Answer: A
Explanation:
We would need MF to match the address and set the forwarding class.
NEW QUESTION 62
You are implementing an MPLS-based WAN environment to connect remote sites to the corporate headquarters (HQ) However, the service provider at the HQ location does not provide service at the location of one of the remote sites.
Which statement is true in this scenario?
- A. A circuit can be bridged across multiple service providers for end-to-end connectivity.
- B. A public WAN circuit can be provisioned over the Internet that will provide the same level of service.
- C. A hub site in a location where both service providers have a presence will need to be deployed.
- D. A dedicated leased line will need to be used to connect to the remote site.
Answer: A
NEW QUESTION 63
Which statement is correct about learning remote host MAC addresses when your DCI is based on EVPN?
- A. Static MAC configuration on the provider edge (PE) device is perform
- B. Data plane MAC learning by the provider edge (PE) device is performed.
- C. No MAC learning by the provider edge (PE) device is performed
- D. Control plane MAC learning by the provider edge (PE) device
Answer: B
NEW QUESTION 64
You work for a corporation deploying new data centers using EVPN/VXLAN You are considering using EVPN for the data center interconnects. The hardware and software being deployed in the data centers support EVPN Type 5 routes.
In this scenario, which additional DCI benefit do Type 5 routes provide?
- A. Type 5 routes support Layer 3 connectivity across multiple data centers, eliminating the need to advertise Layer 3 VPN routes.
- B. Type 5 routes provide Layer 2 connectivity across multiple data centers, if MPLS encapsulation is being used.
- C. Type 5 routes support Layer 2 and Layer 3 connectivity between data center eliminating the need to advertise Layer 3 VPN and Layer 2 VPN routes.
- D. Type 5 routes provide Layer 2 connectivity across multiple data centers, if VXLAN encapsulation is being used.
Answer: C
NEW QUESTION 65
What are two considerations for all WAN designs that use best industry practices? (Choose two)
- A. to provide VXLAN and EVPN solutions
- B. to provide a dynamic routing protocol internally in the LAN
- C. to provide scalability
- D. to provide ease of deployment
Answer: C,D
NEW QUESTION 66
Your customer is deploying a multi-tenant data center and needs help with the WAN edge design.
What are two main design considerations for this environment? (Choose two)
- A. support for Virtual Chassis Control Protocol
- B. support for Network Address Translation
- C. support for data collection and analysis
- D. support for unified threat management
Answer: B,C
NEW QUESTION 67
What are two ways that allow BGP route reflectors to advertise more optimal IGP next hops? (Choose two)
- A. Implement route reflectors at each POP.
- B. Implement a centralized route reflector.
- C. Use SPRING.
- D. UseBGP-ORR.
Answer: B,D
NEW QUESTION 68
What are two high availability solution for routers with a single Routing Engine? (Choose two.)
- A. GRES
- B. Graceful restart
- C. VRRP
- D. Non-stop active routing
Answer: A,C
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/high-availability/topics/concept/high-availability-features-in-junos-introducing.html
NEW QUESTION 69
Exhibit.
Referring to the exhibit which type of IPsec VPN should be used to create the desired topology?
- A. hub-and-spoke VPN
- B. fully meshed VPN
- C. AutoVPN
- D. Group VPN
Answer: D
NEW QUESTION 70
You are asked to design a DDoS prevention system to help mitigate denial-of-service attacks that target your customers. The management group wants to know the effect FlowSpec may have on current network operations if it is implemented as a solution.
In this scenario which two statements are correct? (Choose two )
- A. FlowSpec can block traffic based on the source address.
- B. FlowSpec can block traffic based on stateful flow information.
- C. FlowSpec requires Jflow implementation and licensing.
- D. FlowSpec can block traffic based on the destination address.
Answer: A,D
NEW QUESTION 71
Exhibit.
Which routing protocol design will accomplish these goals?
- A. Enable a full mesh of IBGP sessions between the routers in ISP B.
- B. Configure static routes to ISP A on each router within ISP B.
- C. Redistribute the BGP routes learned from ISP A into the OSPF instance running in ISP B.
- D. Configure each router in ISP B to peer with a par of route reflectors.
Answer: D
NEW QUESTION 72
You are asked to create a point-to-multipoint DCI that does not overwhelm the data plane with MAC learning traffic.
Which protocol would you use in this situation?
- A. pseudowire
- B. VPLS
- C. PPTP
- D. EVPN
Answer: B
NEW QUESTION 73
Exhibit.
Referring to the exhibit considering shared fates, which Internet Transit?
- A. Customer B
- B. Customer C
- C. Customer A
- D. Customer D
Answer: A
NEW QUESTION 74
......
Top Juniper JN0-1362 Courses Online: https://www.prep4sureguide.com/JN0-1362-prep4sure-exam-guide.html