2021 Valid DES-1221 Real Exam Questions (Updated) 100% Dumps & Practice Exam
[UPDATED 2021] EMC DES-1221 Questions Prepare with Free Demo of PDF
Understanding functional and technical aspects of Specialist â Implementation Engineer, PowerStore Solutions Version 1.0 PowerStore Basic Troubleshooting (5%)
The following will be discussed in DELL DES-1221 dumps:
- View system alert, events, and jobs
- Identify PowerStore system fault LEDs
- Gather support materials
Requirements for DES-1221 Exam Candidates
The most suitable candidates for DES-1221 are those specialists who have reached a specific level in their expertise and can prove it by having one of these certificates:
- Associate – Information Storage and Management V 2.0;
- Associate – Information Storage and Management V 4.0.
- Associate – Information Storage and Management V 3.0;
NEW QUESTION 30
What does the remote replication Failover operation do?
- A. Fully synchronizes the source and destination data states and reverses the replication direction
- B. Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
- C. Fully synchronizes the source and destination data states and stops the current replication session
- D. Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
Answer: D
NEW QUESTION 31
Use the simulator to determine how many logical ports are currently marked for replication on the PowerStore appliance.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 32
A Storage Administrator removed an appliance from the cluster. What is the status of the removed appliance's licenses?
- A. Licenses are erased
- B. Licenses becomes void
- C. No licensing impact
- D. New licenses are created
Answer: B
NEW QUESTION 33
How is the upgrade process on a multi-appliance cluster run?
- A. On one node at a time
- B. Master appliance primary node first, then the peer node
- C. On all primary nodes first, then peer nodes
- D. In parallel on all nodes
Upgrade
The upgrade process runs on a single node at a time:
* Starts with the primary appliance
- Non-primary node first
* Control Path
- Turns off all schedulers
- Disable RestAPI for writes
* Waits for ongoing management operations to complete
Backs up management DB
* Disables Primary Appliance Failover
* GUI and RestAPI are unavailable for a short period of time during Control Path failover
Answer: A
NEW QUESTION 34
An administrator has performed the Cutover operation for an import session from a VNX2 source storage system.
What is a result of the operation?
- A. Host is removed from the VNX2 Storage Group
- B. Storage Group containing the imported LUN is deleted
- C. Imported LUN is deleted from the VNX2
- D. Imported LUN is removed from the VNX2 Storage Group
Answer: D
Explanation:
Reference: https://laptrinhx.com/what-is-dell-emc-powerstore-part-7-importing-external-storage-146661351/
NEW QUESTION 35
How many cables are required for minimum support for PowerStore T Front-End storage connectivity?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
NEW QUESTION 36
When a Volume is selected for the intercluster migration, what other data services associated with the volume will also be moved with it?
- A. NAS Servers and File.systems
- B. Replications and Volume Groups
- C. Thin Clones and File systems
- D. Thin Clones and snapshots
Answer: D
NEW QUESTION 37
Refer to the Exhibit.
A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility. What might be the issue?
- A. Port 54 has not been set to trunk mode
- B. Port 54 needs to be enabled
- C. Discovery network uses only native VLAN
- D. Dedicated port needs to be used for discovery network
Answer: D
NEW QUESTION 38
An administrator receives an alert on a PowerStore Cluster with three appliances:
The appliance A1 is projected to run out of space in 8 days
Capacity utilization is above 90 percent
Which tools are available to assist the Administrator with a potential resolution?
- A. System Optimization
- B. Thin provision conversion wizard
- C. Space reclamation wizard
- D. Assisted Migration
Answer: D
Explanation:
Explanation/Reference:
Reference: https://volumes.blog/2020/05/18/what-is-powerstore-part-11-resource-balancer/
NEW QUESTION 39
What is the maximum number of snapshot rules per cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Reference: https://www.delltechnologies.com/da-dk/collaterals/unauth/data-sheets/products/storage/h18143- dell-emc-powerstore-family-spec-sheet.pdf
NEW QUESTION 40
Use the simulator to generate and download logs from all appliances in the PowerStore cluster. When you have finished using the simulator, Click Next.
Answer:
Explanation:
Below are the exhibits solution for this simulation.
NEW QUESTION 41
Refer to the Exhibit.
What happens to the parent resource of thin clone 3 if thin clone 2 is deleted?
- A. Thin clone 1 becomes parent
- B. Snapshot 3 becomes the parent
- C. Thin clone 3 has an empty parent
- D. Thin clone 3 becomes parent
Answer: C
NEW QUESTION 42
Correctly arrange the sequence of the write operation in PowerStore.
Answer:
Explanation:
Reference:
https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/storage/h18151-dell-emc- powerstore-data-efficiencies.pdf
NEW QUESTION 43
What describes the process used in the Import External Storage migration architecture?
- A. Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage
- B. Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage
- C. Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage
- D. Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage
Answer: D
Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5
NEW QUESTION 44
What describes the Import External Storage feature?
- A. A native data migration feature of PowerStore that imports external block storage to PowerStore
- B. An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage
- C. A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems
- D. A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation
Answer: A
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5
NEW QUESTION 45
While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?
- A. Type: Term-Based, Status: Active
- B. Type: Perpetual, Status: Active
- C. Status: Term-Based, Type: Unlimited
- D. Status: Perpetual, Type: Open
Answer: B
Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-cfg/validate-the-top-of- rack-tor-switch-versions-and-licensing?guid=guid-40c30b91-7fb2-4a26-bac7-4ae67c07bdfb&lang=en-us
NEW QUESTION 46
A customer is new to PowerStore and asks if there are any differences between the A and B back-end ports. What is the correct response?
- A. All ports on the base enclosure are output ports
- B. All ports on the base enclosure are input ports
- C. "A" ports are output ports and "B" ports are input ports
- D. "A" ports are input ports and "B" ports are output ports
Answer: C
NEW QUESTION 47
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?
- A. Whether the appliance is online Appliance failure status
Cluster utilization - B. Whether the appliance is offline Appliance failure status Capacity utilization
- C. Whether the Cluster is offline Node failure status
I/O utilization - D. Whether the Node is offline Appliance failure status Node utilization
Answer: B
NEW QUESTION 48
What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?
- A. Select the folder location on the host for the program installation
- B. Configure the network port and interface for the management control path
- C. Configure the network port and interface for the host data path
- D. Select the RSA key for configuring the control path HTTPS certificate
Answer: B
NEW QUESTION 49
What are the IP requirements for ICW on PowerStore X and PowerStore T models?
- A. PowerStore T requires four management IP addresses and PowerStore X requires six management IP addresses
- B. PowerStore T requires five management IP addresses and PowerStore X requires six management IP addresses
- C. PowerStore T requires seven storage IP addresses and PowerStore X requires three storage IP addresses
- D. PowerStore T requires three storage IP addresses and PowerStore X requires five storage IP addresses
Answer: B
NEW QUESTION 50
......
DES-1221 Deluxe Study Guide with Online Test Engine: https://www.prep4sureguide.com/DES-1221-prep4sure-exam-guide.html
NEW 2021 Certification Sample Questions DES-1221 Dumps & Practice Exam: https://drive.google.com/open?id=1e9PObN7wE_pVtJQuL_Zt90iIQfEgp0Rl