[2021] Valid 200-101 test answers & Facebook 200-101 exam pdf
Verified 200-101 dumps Q&As - Pass Guarantee or Full Refund
Facebook 200-101 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 24
An advertiser obtains a p-value of 0.20 after a matched pairs multi-cell experiment. The objective was to measure whether advertising strategy A generated more incremental business outcomes than advertising strategy B.
The test had high statistical power probability, and the result was not a false negative.
What could the advertiser conclude?
- A. The advertiser should place a greater share toward the strategy that had higher impact
- B. The advertiser should allocate the same budget for strategy A and strategy B
- C. No conclusion can be made because the p-value is above 0.05
- D. The advertiser should place all budget in strategy A
Answer: A
NEW QUESTION 25
What can be done to secure the virtual terminal interfaces on a router? (Choose two.)
- A. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.
- B. Physically secure the interface.
- C. Administratively shut down the interface.
- D. Create an access list and apply it to the virtual terminal interfaces with the access-group command.
- E. Configure a virtual terminal password and login process.
Answer: A,E
NEW QUESTION 26
An analyst working for a financial services company is reviewing Facebook campaign results to assess how many new credit card signups can be attributed to its Facebook campaign. The analyst is comparing attributed results in Facebook Ads Manager with those in Google Analytics and needs to explain why these are different.
What are two key differences between the platforms that can provide a reasonable explanation for this outcome? (Choose 2)
- A. Different platforms tend to attribute more conversions to its own platforms
- B. Different platforms may be using different attribution models
- C. Facebook data includes visits, conversions and clicks
- D. Different platforms have access to different data
- E. Google data includes impressions, conversions and clicks
Answer: A,B
NEW QUESTION 27
What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow? (Choose three.)
- A. ingress interface
- B. destination IP address
- C. IP next-hop
- D. source MAC address
- E. egress interface
- F. source IP address
Answer: A,B,F
NEW QUESTION 28
What is the purpose of LCP?
- A. to specify asynchronous versus synchronous
- B. to encapsulate multiple protocols
- C. to perform authentication
- D. to negotiate control options
Answer: D
Explanation:
Link Control Protocol http://www.ietf.org/rfc/rfc1661.txt
In order to be sufficiently versatile to be portable to a wide variety of environments, PPP provides a Link Control Protocol (LCP). The LCP is used to automatically agree upon the encapsulation format options, handle varying limits on sizes of packets, detect a looped-back link and other common misconfiguration errors, and terminate the link. Other optional facilities provided are authentication of the identity of its peer on the link, and determination when a link is functioning properly and when it is failing.
NEW QUESTION 29
What is the default administrative distance of OSPF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Default Distance Value Table
This table lists the administrative distance default values of the protocols that Cisco supports:
NEW QUESTION 30
Which two states are the port states when RSTP has converged? (Choose two.)
- A. disabled
- B. listening
- C. discarding
- D. learning
- E. forwarding
Answer: C,E
NEW QUESTION 31
What is one benefit of PVST+?
- A. PVST+ allows the root switch location to be optimized per VLAN.
- B. PVST+ automatically selects the root bridge location, to provide optimized bandwidth usage.
- C. PVST+ supports Layer 3 load balancing without loops.
- D. PVST+ reduces the CPU cycles for all the switches in the network.
Answer: A
NEW QUESTION 32
Refer to the exhibit.
How will the router handle a packet destined for 192.0.2.156?
- A. The router will forward the packet via either Serial0 or Serial1.
- B. The router will drop the packet.
- C. The router will forward the packet via Serial2.
- D. The router will return the packet to its source.
Answer: C
NEW QUESTION 33
The following configuration is applied to a Layer 2 Switch:
interface fastethernet 0/4
switchport mode access
switchport port-security
switchport port-security mac-address 0000.1111.1111
switchport port-security maximum 2
swithcport port-security
What is the result of the above configuration being applied to the switch?
- A. Violating addresses are dropped and no record of the violation is kept
- B. The port is effectively shutdown
- C. A host with a mac address of 0000.1111.1111 and one other host can connect to Fast Ethernet 0/4 simultaneously
- D. The switch can send an SNMP message to the network management station
- E. A host with a mac address of 0000.1111.1111 and up to two other hosts can connect to FastEthernet 0/4 simultaneously
Answer: C,D
Explanation:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/20ewa/configuration/guide/port_ sec.html
NEW QUESTION 34
Which two are advantages of static routing when compared to dynamic routing? (Choose two.)
- A. An efficient algorithm is used to build routing tables, using automatic updates.
- B. Routing tables adapt automatically to topology changes.
- C. Routing updates are automatically sent to neighbors.
- D. Security increases because only the network administrator may change the routing table.
- E. Route summarization is computed automatically by the router.
- F. Configuration complexity decreases as network size increases.
- G. Routing traffic load is reduced when used in stub network links.
Answer: D,G
NEW QUESTION 35
In GLBP, which router will respond to client ARP requests?
- A. The active virtual gateway will reply with its own hardware MAC address.
- B. The GLBP member routers will reply with one of four possible burned in hardware addresses.
- C. All GLBP member routers will reply in round-robin fashion.
- D. The active virtual gateway will reply with one of four possible virtual MAC addresses.
Answer: D
NEW QUESTION 36
Which three statements about HSRP operation are true? (Choose three.)
- A. HSRP supports up to 255 groups per interface, enabling an administrative form of load balancing.
- B. The HSRP virtual IP address must be on a different subnet than the routers' interfaces on the same LAN.
- C. The virtual IP address and virtual MA+K44C address are active on the HSRP Master router.
- D. HSRP supports only clear-text authentication.
- E. The HSRP default timers are a 3 second hello interval and a 10 second dead interval.
- F. The HSRP virtual IP address must be the same as one of the router's interface addresses on the LAN.
Answer: A,C,E
NEW QUESTION 37
Refer to the exhibit.
Which two statements are true about the loopback address that is configured on RouterB? (Choose two.)
- A. It indicates that RouterB should be elected the DR for the LAN.
- B. It decreases the metric for routes that are advertised from RouterB.
- C. It provides stability for the OSPF process on Router
- D. It ensures that data will be forwarded by RouterB.
- E. It specifies that the router ID for RouterB should be 10.0.0.1.
Answer: C,E
Explanation:
A loopback interface never comes down even if the link is broken so it provides
stability for the OSPF process (for example we use that loopback interface as the router-id) - B is
correct.
The router-ID is chosen in the order below:
The highest IP address assigned to a loopback (logical) interface.If a loopback interface is not
defined, the highest IP address of all active router's physical interfaces will be chosen.
-The loopback interface will be chosen as the router ID of RouterB - C is correct.
NEW QUESTION 38 
What would be the destination Layer 2 address in the frame header for a frame that is being forwarded by Dubai to the host address of 172.30.4.4?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
According to command output 172.30.4.4 is using the 694 dlci value. http://www.cisco.com/en/US/docs/ios/12_2/wan/command/reference/wrffr4.html#wp1029343
NEW QUESTION 39
Which statements are true about EIGRP successor routes? (Choose two.)
- A. A successor route is used by EIGRP to forward traffic to a destination.
- B. A successor route may be backed up by a feasible successor route.
- C. Successor routes are saved in the topology table to be used if the primary route fails.
- D. Successor routes are stored in the neighbor table following the discovery process.
- E. Successor routes are flagged as 'active' in the routing table.
Answer: A,B
Explanation:
Introduction to EIGRP http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f07.shtml
Feasible Successors A destination entry is moved from the topology table to the routing table when there is a feasible successor. All minimum cost paths to the destination form a set. From this set, the neighbors that have an advertised metric less than the current routing table metric are considered feasible successors. Feasible successors are viewed by a router as neighbors that are downstream with respect to the destination.
These neighbors and the associated metrics are placed in the forwarding table.
When a neighbor changes the metric it has been advertising or a topology change occurs in the
network, the set of feasible successors may have to be re-evaluated. However, this is not
categorized as a route recomputation.
NEW QUESTION 40
DRAG DROP
Answer:
Explanation:
Explanation:
poison reverse: A router learns from its neighbor that a route is down and the router sends an update back to the neighbor with an infinite metric to that routeLSA: The packets flooded when a topology change occurs, causing network routers to update their topological databases and recalculate routes split horizon: This prevents sending information about a routeback out the same interface that originally learned about the routeholddown timer: For a given period, this causes the router to ignore any updates with poorer metrics to a lost network
NEW QUESTION 41
What is the default administrative distance of OSPF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 42
A startup ecommerce company is beginning to run media campaigns to increase sales. It is having trouble taking action from its media campaigns because of the high number of KPIs it is considering when analyzing results.
The startup company has been in the growth phase, so the focus has been on increasing the number of people who see ads for their products on Facebook. As the company grows, the focus is shifting towards generating sales. For its Facebook campaigns, the business is considering incremental purchases, incremental reach, CPMs, website visits, clicks and impressions.
Which metric should be prioritized to support the company's new Facebook marketing strategy?
- A. Website visits
- B. Click-through rate
- C. Incremental purchases
- D. Incremental reach
Answer: B
NEW QUESTION 43
What are three factors a network administrator must consider before implementing Netflow in the network? (Choose three.)
- A. WAN encapsulation
- B. CPU utilization
- C. port availability
- D. number of devices exporting Netflow data
- E. SNMP version
- F. where Netflow data will be sent
Answer: B,D,F
NEW QUESTION 44
What are two characteristics of Frame Relay point-to-point subinterfaces? (Choose two.)
- A. They require the use of NBMA options when using OSPF.
- B. They require a unique subnet within a routing domain.
- C. They create split-horizon issues.
- D. They are ideal for full-mesh topologies.
- E. They emulate leased lines.
Answer: B,E
Explanation:
http://www.ciscopress.com/articles/article.asp?p=170741&seqNum=5
Configuring Frame Relay Subinterfaces On partially meshed Frame Relay networks, the problem of split horizon can be overcome by using Frame Relay subinterfaces. Frame Relay provides a mechanism to allow a physical interface to be partitioned into multiple virtual interfaces. In a similar way, using subinterfaces allows a partially meshed network to be divided into a number of smaller, fully meshed point-topoint networks. Generally, each point-to-point subnetwork is assigned a unique network address. This allows packets received on one physical interface to be sent out from the same physical interface, albeit forwarded on VCs in different subinterfaces. There are two types of subinterfaces supported by Cisco routers: point-to-point and multipoint subinterfaces.
NEW QUESTION 45
Refer to the exhibit.
Which of these correctly describes the results of port security violation of an unknown packet?
- A. port disabled; SNMP or syslog messages
- B. port enabled; unknown packets dropped; no SNMP or syslog messages
- C. port disabled; no SNMP or syslog messages
- D. port enabled; unknown packets dropped; SNMP or syslog messages
Answer: A
NEW QUESTION 46
An advertiser is reviewing campaign results in Facebook Attribution and determines that optimizing its campaigns for website content views appears to be more successful than optimizing for clicks.
Details reviewed were as follows:
* A last touch attribution model was used
* Look back window was 90 days
* Campaigns optimized for clicks delivered a cost per view for SO.55
* Campaigns optimized for website content views yielded a cost per view of S0.49
The advertiser wants to assess whether or not this difference is meaningful or due to random chance before adjusting its strategy accordingly. What action could the analyst take to determine if the difference is meaningful?
- A. Run data-driven attribution
- B. Run a multi-cell Conversion Lift test
- C. Run a single linear regression analysis
- D. Run a single-cell Conversion Lift test
Answer: B
NEW QUESTION 47
......
200-101 Exam Questions – Valid 200-101 Dumps Pdf: https://www.prep4sureguide.com/200-101-prep4sure-exam-guide.html
200-101 PDF Dumps Recently Updated Questions: https://drive.google.com/open?id=1fTYNh1zrDbOGHpzU2bO3qyuiZeSrG1qy