100% Pass Top-selling E_S4HCON2022 Exams - New 2021 SAP Pratice Exam
SAP Certified Technology Specialist Dumps E_S4HCON2022 Exam for Full Questions - Exam Study Guide
E_S4HCON2022 Exam Certification Details:
| Cut Score: | 65% |
| Level: | Specialist |
| Exam: | 40 questions |
| Languages: | English |
| Sample Questions: | SAP E_S4HCON2022 Exam Sample Question |
| Duration: | 90 mins |
NEW QUESTION 33
You are upgrading a three-system landscape DEV - QAS - PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system. What do you need to consider? Please choose the correct answer.
- A. The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.
- B. The upgrade of the PRD must be finished before you start new development in the DEV.
- C. The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.
- D. The transport between Unicode and non-Unicode systems is forbidden.
Answer: C
NEW QUESTION 34
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:
- A. SAT (Runtime Analysis)
- B. SYCM (Simplification Database Content)
- C. SE80 (Object Navigator)
- D. ATC (ABAP Test Cockpit)
Answer: C,D
NEW QUESTION 35
What do you do to prepare the database migration option of a SUM procedure?
There are 3 correct answers
Response:
- A. Move the SAPM update archive into the download folder
- B. Move the stack.xml update file into the download folder
- C. Move the R3trans update archive into the download folder
- D. Extract the SAP HANA database installation archive
- E. Extract the SAP HANA client installation archive
Answer: A,B,E
NEW QUESTION 36
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the database migration option (DMO) for SUM
- B. Using the main configuration option "Single System" when installing an Add-On
- C. Using the main configuration option "Standard" when applying SAP Support Packages
- D. Using the main configuration option "Single System" in case of an upgrade.
Answer: B
NEW QUESTION 37
What do you need to know about the SAP ERP Upgrade and Update Guide?
There are 2 correct answers to this question.
Response:
- A. It contains a troubleshooting section
- B. It contains a section "free space requirements"
- C. It is a database-specific document
- D. It is target release specific
Answer: B,D
NEW QUESTION 38
You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.
- A. Credentials of a named user in the development client of the development system
- B. Credentials of user DDIC in the development client of the development system
- C. Credentials of user DDIC in client 000 of the shadow system
- D. Credentials of a named user in client 000 of the shadow system
Answer: A
NEW QUESTION 39
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:
- A. Parameter file SAPup_add.par
- B. MIGRATE J5T_DUR_XML file from a previous run
- C. Stack XML file calculated by the Maintenance Planner
- D. Breakpoint configuration file SAPUPPHAS.BRK
Answer: B,C
NEW QUESTION 40
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM continues with the next phase and your modifications are lost
- B. SUM continues with the next phase and your modifications are kept as In the start release
- C. Before continuing with the next phase SUM asks for a modification adjustment transport
- D. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
Answer: B
NEW QUESTION 41
You downloaded content from the SAP note 1000009 ("ASU Toolbox 2008"). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:
- A. /ASU/START (Start ASU Toolbox)
- B. /ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)
- C. /ASU/SHOW_NOTE (Show SAP Note via Web-Browser)
- D. /ASU/SSM (ASU Simple Schedule Manager)
Answer: A
NEW QUESTION 42
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:
- A. Uptime migration (EU_CLONE_MIG_UT_RUN)
- B. Shadow repository creation (EU_IMPORT*)
- C. Downtime migration (EU_CLONE_MIG_DT_RUN)
- D. ParaUel distribution (PARDIST_SHD)
Answer: A
NEW QUESTION 43
You are planning to use DMO of SUM to perform an "inplace-migration" to SAP HANA.
What do you need to consider? Note: there are 2 correct answers to this question.
- A. The source system is non-Unicode and the target database is a scale-out system.
- B. SAP HANA Landscape Reorganization required a manual step to edit a file.
- C. Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.
- D. Network capacity between exporting and importing R3load processes must be.
- E. The target database size increases temporarily because of the Shadow Repository.
Answer: B,C
NEW QUESTION 44
What are the benefits of using the Benchmarking option of the DMO for SUM?
There are 2 correct answers to this question.
Response:
- A. You can find the optimal number of parallel R31oad processes by monitoring host performance.
- B. You can verify that the content of the download directory matches the stack.XML file.
- C. You can obtain migration duration files that can be used to optimize the next runs from a previous benchmark run.
- D. You can record the modification adjustment during migration and use the transports in the next runs.
Answer: A,D
NEW QUESTION 45
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:
- A. Perform the Unicode conversion before the upgrade to SAP ECC 6.08.
- B. Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.
- C. Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.
- D. Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.
Answer: A
NEW QUESTION 46
Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:
- A. The major SUM Guide
- B. The Application Guide
- C. The DMO Guide
- D. The SAP S/HANA Conversion Guide
Answer: C,D
NEW QUESTION 47
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:
- A. It performs a comparison on all tables using row counts.
- B. It does NOT perform any table comparison.
- C. It performs a comparison on selected tables using check sum.
- D. It performs a comparison of all tables using check sum.
Answer: A
NEW QUESTION 48
ICNV initialization does 3
- A. Creation of views
- B. Creation of flag
- C. AA
- D. Build index on flag column
Answer: A,B,D
NEW QUESTION 49
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:
- A. Check the system log (transaction SM21) of the SAP system
- B. Check the most recent entries in SAPup.log
- C. Check the messages shown by the SUM UI
- D. Check the most recent entries shown in file sapevt.trc
Answer: B,C
NEW QUESTION 50
You are performing an upgrade of an SAP ECC development system with SUM. What is the earliest point when the upgrade is considered complete and you can allow all dialog users to log on to the system?
Please choose the correct answer.
Response:
- A. During the SUM roadmap step "Postprocessing", in parallel with post procedure steps
- B. After the SUM roadmap step "Postprocessing" and post procedure steps are finished
- C. After the SUM roadmap step "Execution" is finished and before "Postprocessing"
- D. During the SUM roadmap step "Postprocessing", after the post procedure steps are complete
Answer: D
NEW QUESTION 51
......
SAP S/4HANA Conversion and SAP System Upgrade Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books | Weighting |
|---|---|---|
| SUM Prepare Part | Perform the SUM prepare part ADM328 | > 12% |
| SUM Monitoring and Troubleshooting | Monitor and troubleshoot the SUM procedure ADM328 | 8% - 12% |
| Handling of an SAP System Landscape | Describe the handling of the SAP system landscape during SAP S/4HANA conversion and SAP system upgrade ADM328 | 8% - 12% |
| Downtime | Describe the factors influencing downtime and techniques to reduce downtime ADM328 | 8% - 12% |
| Modification Adjustment | Perform the modification adjustment with SPDD and SPAU ADM328 | 8% - 12% |
| SUM Execution Part | Perform the SUM execution part, including DMO ADM328 | > 12% |
| SAP S/4HANA Conversion Prepare Phase | Describe and perform the actions necessary during the SAP S/4HANA conversion prepare phase ADM328 | > 12% |
| Manual Activities for SUM | Describe the necessary manual preparation and follow-on activities for SUM ADM328 | 8% - 12% |
Authentic Best resources for E_S4HCON2022 Online Practice Exam: https://www.prep4sureguide.com/E_S4HCON2022-prep4sure-exam-guide.html
E_S4HCON2022 Test Engine Practice Exam: https://drive.google.com/open?id=1qHHn8lg1W2QAV1ZmDD9sB8ey-OOhXqL9